Canon printer MAXIFY MB2320 User Manual

About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine
on/off automatically to save electricity.
Using Duplex Printing
Turning on/off the machine automatically
Important
•
Depending on the setting item, authentication by the administrator password is required.
About the Machine Administration
If you do not know the administrator password, ask the administrator of the machine you are using.
Using Duplex Printing
Follow the procedure...

Turning on/off the machine automaticallyFollow the procedure below to use power saving function.1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   ECO settings .
Using the Operation Panel
3.
Tap Power control .
4.
Specify the settings as necessary.
When you specify the time and day to turn the machine on:
1.
Tap  Power control - ON settings .
2.
Tap ON on the displayed screen.
The screen below is displayed.
3.
Tap the time.
The screen below is displayed.
4.
Tap the numbers...

You can specify the hour from 0 to 24 and specify the minute in increments of 10 minutes.5.
Tap OK to confirm the time to turn the machine on.
After confirming the time to turn the machine on, the screen to specify the day is displayed. Tap
the day, tap  Enable or Disable , then tap  OK. The setting is valid on the day(s) you select  Enable
for.
When you specify the time and day to turn the machine off:
1.
Tap  Power control - OFF settings .
2.
Tap ON on the displayed screen.
The screen below is...

About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night. In addition, you can specify the time range to reduce the operating noise.
Important
•
Set the current date and time in advance.
Setting the Sender Information
•
Authentication by the administrator password may be required to change the setting.
About the Machine Administration
If you do not know the administrator password, ask the administrator of the machine you are using....

1.
Tap the numbers to specify the starting time.
You can specify the hour from 0 to 24.
2.
Tap to confirm the starting time.
After specifying the starting time, specify the ending time following the same procedure.
B.
Tap to confirm the time to start and to end.
You can reduce the operating noise during the specified time.
The confirmation screen is displayed, then the 
 icon appears as the  Quiet setting menu
icon.
Important
•
Operating speed may be reduced compared to when the quiet mode is not...

Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security...

Note•
Tapping Details displays the security setting.
The password required when connecting from the external device is also displayed.
•
You can specify the access point name (SSID) and the security setting optionally.
Setting of the Access Point Mode
7.
Tap  OK.
The access point mode is enabled and the machine can be used as an access point.
Printing/Scanning with the Access Point Mode
Print/Scan with the access point mode following the procedure below.
1.
Connect an external device such as a computer...

3.Tap LAN settings .4.
Tap Change LAN .
5.
Tap Wireless LAN active .
If you do not use the machine over wireless LAN, select  Wired LAN active or Disable LAN .
Setting of the Access Point Mode Specify the settings for the access point mode following the procedure below.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap LAN settings .
5.
Tap Other settings .
6.
Tap Access point mode settings .
The screen to...

13.Enter the password (8 to 10 characters).14.
Tap OK to finish entering the password.
15.
Tap  OK to finish specifying the password setting.
Note
•
If you change the access point mode setting of the machine, also change the access point setting of
the external device such as a computer or a smartphone.
279 

Registering the Favorite Settings (Custom profiles)You can register the favorite copying, scanning, or faxing settings and call them up from the HOME screen.
You can register up to 20 settings.
Registering the Setting
Calling Up the Registered Setting
Editing/Deleting the Registered setting
Registering the Setting
Tap  Save profile  on each standby screen or on the screen displayed after the settings are specified.
Copy standby screenScan standby screenFax transmission standby screen
When the...