Canon printer MAXIFY MB2320 User Manual

Cleaning the Platen Glass and Document Cover
Important
•
Be sure to turn off the power and unplug the power cord before cleaning the machine.
•
The power cannot be turned off while the machine is sending or receiving a fax, or when unsentfaxes are stored in the machine's memory. Make sure if the machine completed sending or
receiving all the faxes before unplugging the power cord.
•
The machine cannot send or receive faxes when the power is turned off.
•
If the power cord is unplugged, the date/time...

Cleaning the ADF (Auto Document Feeder)Be sure to use a soft, clean, lint-free and dry cloth to clean the ADF (Auto Document Feeder).
Important
•
Be sure to turn off the power and unplug the power cord before cleaning the machine.
•
The power cannot be turned off while the machine is sending or receiving a fax, or when unsentfaxes are stored in the machine's memory. Make sure if the machine completed sending or
receiving all the faxes before unplugging the power cord.
•
The machine cannot send or...

4.
After wiping, close the document feeder cover by pushing it until it clicks into place.
5.
Close the document tray.
233 

Cleaning the Paper Feed RollerIf the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper1.
Make sure that the power is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The setup menu screen will appear.
3.
Tap   Maintenance .
The...

11.Tap OK.
The machine starts cleaning. The cleaning will be complete when the paper is ejected.12.
When the completion message appears, tap  OK.
If the problem is not resolved after cleaning the paper feed roller, contact the service center.
235 

Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly.
You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1.
Make sure that the power is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The setup menu screen will appear.
3.
Tap   Maintenance .
The...

9.
Load only this sheet of paper in the cassette 1 with the ridges of the creases facing up and
the edge of the half with no crease facing to the far side.
Important
•
The cassette 2 is not available for the Bottom Plate Cleaning procedure. Be sure to load paper in the cassette 1.
10.
Extend the output tray extension, then open the paper output support.
11.
Tap  OK.
The paper cleans the inside of the machine as it feeds through the machine. Check the folded parts of the ejected paper. If they are smudged...

•If the power cord is unplugged, the date/time settings will be reset and all documents stored in themachine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive before unplugging the power cord.
238 

Cleaning the Pad in the CassetteIf the pad in a cassette is smeared with paper powder or dirt, two or more sheets of paper may be ejected.
Follow the procedure below to clean the pad in a cassette.
You need to prepare: cotton swab1.
Pull out the cassette 1 or cassette 2 from the machine, then remove all the paper.
2.
Clean the pad (A) sideways with a moistened cotton swab.
Important
•
After cleaning the smeared pad, dry it completely.
For an example of the cassette 1:
3.
Reload the paper, then insert the...

Changing the Machine Settings
Changing Machine Settings from Your Computer
Changing the Machine Settings Using the Operation Panel
Registering the Favorite Settings (Custom profiles)
Checking the Total Number of Uses of the Machine
240