Canon printer MAXIFY MB2320 User Manual

2700Cause
Possible causes include the following.•
Some errors occurred while copying and a certain time passed.
•
Document is remained in the ADF.
•
Some errors occurred while scanning and the document is remained in the ADF.
Action Take the corresponding actions below.
•
When you copy, tap  OK on the touch screen to dismiss the error, and try to copy again.
•
When the document is remained in the ADF, tap  OK on the touch screen to feed out the document.
•
When you scan, press the  Stop button to cancel...

2802Cause
No document in the ADF.
Action Tap  OK on the touch screen to resolve the error, then operate again after loading documents.1082 

2803Cause
The document is too long or is jammed in the ADF.
Action Tap  OK on the touch screen to dismiss the error. Then make sure that the document you are loading
meets the machine's requirements before redoing the operation.
If the document is jammed, remove the jammed document following the procedure below.•
If the original is jammed in the ADF: Remove the document following the procedure below.
1.
If printing is in progress, press the  Stop button.
2.
Turn off the machine.
3.
If a multi-page...

If you cannot remove the document or the document tears inside the machine, or if the document jamerror continues after removing the document, contact the service center.
Note
•
The document may not feed properly depending on the media type, or your environment, such aswhen the temperature and humidity are either too high or too low.
In this case, reduce the number of document pages to approximately half of the loading capacity.
If the document still jams, use the platen glass instead.
•
If the original...

4100Cause
The specified data cannot be printed.
Action When you print the contents on CREATIVE PARK PREMIUM, confirm the message on the computer
screen, make sure that genuine Canon ink tanks are installed properly for all colors, then start printing
again.1085 

4103Cause
Cannot perform printing with the current print settings.
Action Press the machine's  Stop button to cancel printing.
Then change the print settings and print again.1086 

4104Cause
The paper size or the media type that cannot be fed from the cassette 2 is specified.
Action
Press the machine's  Stop button to cancel printing.
Specify the paper size setting to A4, Letter, or Legal and specify the media type setting to Plain Paper. Then print again.
Note
•
If you will not change the paper size setting or the media type setting, select the cassette 1 as the
paper source. If this is the case, register the cassette 1 paper information properly.
1087 

5011Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
Important
•
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
1088 

5012Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
Important
•
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
1089 

5040Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
Important
•
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
1090