Canon printer MAXIFY MB2320 User Manual

•If the paper is jammed while printing from a computer or copying in progress:
After clearing the paper jam error and tapping  OK on the touch screen of the machine, then the
machine resumes printing from the next page where the paper was jammed.
As the page where the paper was jammed is not printed, reprint if necessary.
When the paper is jammed while duplex printing or duplex copying is in progress, it is possible
that the printing or copying order is not as you expect if you resume printing after...

1313Cause
The paper is jammed inside the rear cover as the machine pulled in the printed paper.
Action If the paper is jammed inside the rear cover as the machine pulled in the printed paper, remove the paperfollowing the procedure below.
Important
•
If the printed paper piles up on the paper output slot, the machine may pull it in and the paper isjammed inside the machine. Remove the printed paper from the paper output tray before it amounts to 75 sheets.
•
The power cannot be turned off while the...

Slide the rear cover to the left then open it.4.
Pull out the paper slowly.
Note
•
Do not touch the inner parts of the machine.
•
If you cannot pull the paper out, try the following.
•
Turn the machine off and turn it back on.
The paper may be ejected automatically.
•
Pull out the paper output tray.
It becomes easy to pull out the paper.
5.
Close the rear cover slowly.
Close the rear cover then slide it to the right.
Slide the rear cover so that the 
 mark on the rear cover aligns with the  mark on the...

After clearing the paper jam error and tapping OK on the touch screen of the machine, the
machine resumes printing from the page where the paper was jammed.•
If the paper is jammed while printing from a computer or copying in progress:
After clearing the paper jam error and tapping  OK on the touch screen of the machine, then the
machine resumes printing from the next page where the paper was jammed.
As the page where the paper was jammed is not printed, reprint if necessary.
When the paper is jammed...

1314Cause
Paper is jammed inside the rear cover when performing automatic duplex printing.
Action
If the paper is jammed inside the rear cover when performing automatic duplex printing, remove the paper
following the procedure below.
Important
•
The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or the unsent fax are stored in the machine's memory.
Make sure that the machine has completed sending or receiving all the faxes before unplugging the...

4.
Pull out the paper slowly.
Note
•
Do not touch the inner parts of the machine.
•
If you cannot pull the paper out, try the following.
•
Turn the machine off and turn it back on.
The paper may be ejected automatically.
•
Pull out the paper output tray.
It becomes easy to pull out the paper.
5.
Close the rear cover slowly.
Close the rear cover then slide it to the right.
Slide the rear cover so that the 
 mark on the rear cover aligns with the  mark on the machine.
6.
Reload the paper, and tap  OK on...

•If the paper is jammed while printing from a computer or copying in progress:
After clearing the paper jam error and tapping  OK on the touch screen of the machine, then the
machine resumes printing from the next page where the paper was jammed.
As the page where the paper was jammed is not printed, reprint if necessary.
When the paper is jammed while duplex printing or duplex copying is in progress, it is possible
that the printing or copying order is not as you expect if you resume printing after...

2801Cause
The document is jammed in the ADF.
Action Remove the document following the procedure below.
Important
•
The power cannot be turned off while the machine is sending or receiving a fax, or when the receivedfax or the unsent fax are stored in the machine's memory.
Make sure that the machine has completed sending or receiving all the faxes before unplugging the
power cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
•
If the original remains in...

5.
Close the document feeder cover, then turn on the machine.When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact the service center.
Note
•
The document may not feed properly depending on the media type, or your environment, such aswhen the temperature and humidity are either too high or too low.
In this case, reduce the...

In Other CasesMake sure of the following:
Check1  Are there any foreign objects around the paper output slot?
Check2 Are the rear cover attached properly?
Check3 Is the paper curled?
Load the paper after correcting its curl.
1050