Canon printer MAXIFY MB2320 User Manual

1007Cause
Possible causes include the following.•
There is no paper in the cassette 1.
•
Paper is not loaded in the cassette 1 properly.
Action Take the corresponding actions below.
•
Load paper in the cassette 1.
•
Align the paper guides with the both edges of the paper when you load paper in the cassette 1.
After carrying out the above measures, tap  OK on the touch screen to dismiss the error.
Note
•
The loadable paper differs depending on the paper source.
A4, Letter, or Legal-sized plain paper can...

1008Cause
Possible causes include the following.•
There is no paper in the cassette 2.
•
Paper is not loaded in the cassette 2 properly.
Action Take the corresponding actions below.
•
Load paper in the cassette 2.
•
Align the paper guides with the both edges of the paper when you load paper in the cassette 2.
After carrying out the above measures, tap  OK on the touch screen to dismiss the error.
Important
•
The loadable paper differs depending on the paper source.
The loadable paper in the cassette 2 is...

1200Cause
The front cover is open.
Action Close the front cover and wait for a while.Do not close it while you are replacing an ink tank.1053 

1310Cause
The size of paper may not be compatible with automatic duplex printing.
Action
The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure that the size of the
paper loaded in the machine is correct. Tapping  OK on the touch screen will eject the paper and restart
printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.1054 

1575Cause
Ink cannot be correctly detected.
Action If an ink tank becomes empty, replace it.
An ink tank cannot be replaced until it becomes empty.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.1055 

1600Cause
Ink may have run out.
Action Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, tap  OK on the machine with the ink tank
installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
machine may be damaged if printing is continued under the ink out condition.
Since the information contained in the fax may be lost if it is printed in this condition, the received fax will
not be printed and will be stored in...

1660Cause
The ink tank is not installed.
Action
Install the ink tank.1057 

1688Cause
The ink has run out.
Action
Replace the ink tank and close the front cover.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable...

1700Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.1059 

1701Cause
The ink absorber is almost full.
Action Tap  OK on the touch screen to continue printing. Contact the service center.1060