Canon printer MAXIFY MB2120 User Manual

AdministratorPasswordSetforMachineUnknown
Initialize the printer settings.
Select  Resetall  to restore administrator password to default.
Reset setting
After initializing the printer settings, redo setup.

MachineCannotBeUsedAfterReplacingWirelessRouteror
ChangingItsSettings
When you replace a wireless router, redo the network setup for the printer.

WithEncryptionOn,CannotCommunicatewithPrinterAfter
ChangingEncryptionTypeatWirelessRouter
If you change the encryption type for the printer and it subsequently cannot communicate with the
computer, make sure the encryption type for the computer and the wireless router matches the type set
for the printer.
Cannot Communicate with Printer After Enabling MAC/IP Address Filtering or Encryption Key on
Wireless Router
1053 

PrintingIsSlow
Check1 Printer may be printing or scanning a large job from another computer.
Check2 Make sure the printer is not placed too far away from the wireless router.
Place the wireless router and printer where there are no obstacles between them. Wireless communication
between different rooms or floors is generally poor. Wireless communication can be impeded by building
materials containing metal or concrete. If the printer cannot communicate with the computer over a wireless LAN
due to a...

CannotAccesstoInternetonWirelessLANfromCommunication
Device
Check1  Is your device connected to printer using direct connection?
If your device is connected to the printer using direct connection, you cannot access to the Internet. Turn off direct connection and connect your device to the wireless router.
For details, see the instruction manual provided with your device and wireless router.
Check2  Is wireless router on?
Check3 Is wireless router configured properly?
For more on checking wireless...

InkLevelNotShownonPrinterStatusMonitor(Windows)
Use the printer driver with bidirectional communication.
Select  Enablebidirectionalsupport  in the Ports sheet of the properties dialog box of the printer driver.
How to Open the Printer Driver Setup Window
1056 

OtherNetworkProblems
MessageAppearsonComputerDuringSetup
PacketsAreSentConstantly(Windows)
CheckingNetworkInformation
RestoringtoFactoryDefaults
1057 

MessageAppearsonComputerDuringSetup
Screen to Enter Password Appears During Setup
Encryption Settings Screen Appears When Wireless Router Selected
"You have connected the printer to the non encrypted wireless network" Appears
ScreentoEnterPasswordAppearsDuringSetup
The following screen appears if the printer is set up for use with a network and an administrator password
has been set.

EncryptionSettingsScreenAppearsWhenWirelessRouterSelected
This screen appears automatically if the selected wireless router is encrypted. Set the same encryption
settings as those set for the wireless router.

PacketsAreSentConstantly(Windows)
When IJ Network Scanner Selector EX2 is enabled, it periodically transmits packets to check
communication with the printer over the network. If you are using your computer in a network environment
other than the one used to set up the printer, disable IJ Network Scanner Selector EX2.
To disable IJ Network Scanner Selector EX2, right-click the 
 icon on the notification area on the
desktop and select  DisableCanonIJNetworkScannerSelectorEX2 .
1060