Canon printer imageCLASS MF6595CX User Manual

Machine Settings
12-26

ADJUST./CLEANING
13. LARGE PAPER MODESets whether to improve toner fix on large-sized paper.
OFF
ON
–
–
14.  AUTO ADF DRTY ADJ
Sets whether to activate smudge (due to dust or dirt) reduction 
during printing.
When the ADF is dirty, copies may contain unwanted dots or 
lines.
ON
OFF
–
–
15.  MAINTENANCE CODE
This setting is not functional in this model.
REPORT SETTINGS
Setting ItemDescription
1.  SETTINGS*
Sets the report functions. (See Chapter 11, “Appendix,” in the 
Reference...

12-27
Machine Settings

REPORT SETTINGS
2. RX REPORTSets whether the fax reception report prints out.
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
–
–
–
3.  ACTIVITY REPORT
Sets whether to automatically print the fax transaction report 
and selects its type.
1.  AUTO PRINT
Sets whether an activity report is printed automatically every 40 
transactions.
OUTPUT YES
OUTPUT NO
–
–
2.  TX/RX SEPARATE
Sets whether an activity report is printed separately for sending 
and receiving or not.
OFF
ON
–
–
2.  LIST PRINT...

Machine Settings
12-28

SYSTEM SETTINGS
Setting ItemDescription
1.  DEVICE INFO
Sets device information.
1.  DEVICE NAME
Registers the machine name.
2.  LOCATION
Registers the machine location.
2.  NETWORK SETTINGS****
Sets network setting. (See Chapter 3, “Network (MF6595cx/
MF6595/MF6590/MF6540 Only),” in the Reference Guide.)
1.  TCP/IP SETTINGS
Sets TCP/IP network.
1.  IP ADDRESS AUTO.
Sets whether to automatically set an IP address.
ONEnables an IP address to the machine automatically.
1. DHCP...

12-29
Machine Settings

SYSTEM SETTINGS
7. USE HTTPSets whether to activate HTTP (HyperText Transfer Protocol) for 
the Remote UI.
ON (PORT NO.)
OFF
–
–
8.  SET IP ADD RANGE
Sets whether to restrict the range of IP addresses.
OFFDisables restriction of IP address of computers.
ONEnables restriction of IP address of computers from which data 
(print/fax jobs) can be sent to the machine.
1.  PERMIT/
REJECT
Selects whether to permit or reject access from a specified IP 
address.
REJECT
PERMIT
–
–
2.  SET...

Machine Settings
12-30

SYSTEM SETTINGS
2. SNMP SETTINGSSets detailed information about SNMP.
1.  USE SNMP
Sets whether to activate SNMP.
ON (PORT NO.)
OFF
–
–
2.  COMMUNITY NAME 1
Sets SNMP community name 1.
3.  COMMUNITY NAME 2
Sets SNMP community name 2.
4.  SNMP WRITABLE 1
Enables computers on the network to access the machine and 
modify its settings.
ON
OFF
–
–
5.  SNMP WRITABLE 2 
Enables computers on the network to access the machine and
modify its settings.
OFF
ON
–
–
3.  DEDICATED PORT
Sets or...

12-31
Machine Settings

SYSTEM SETTINGS
5. VIEW IP ADDRESSChecks the current network settings.
1.  IP ADDRESS
Checks the IP address.
2.  SUBNET MASK
Checks the subnet mask.
3.  GATEWAY ADDRESS
Checks the gateway address.
6.  STARTUP TIME SET.
Sets the time period required to delay the startup of network 
communications for the machine. (0–300 SEC) (0 SEC)
3.  COMMUNICATIONS*
Sets the facsimile communication.
1.  TX START SPEED
Sets the transmission speed for all sent documents.
(33600 bps, 2400 bps,...

Machine Settings
12-32

SYSTEM SETTINGS
4. REMOTE UI****Sets whether to activate the Remote UI function to operate the 
machine and change settings.
ON
OFF
–
–
5.  ACCESS TO DEST.*
Sets restriction of the access to destinations.
1.  RESTRICT NEW ADD.
Sets whether to restrict registering or changing destinations 
for one-touch and coded speed dialing. Sets whether to restrict 
making calls to the destinations not registered for the speed 
dialing.
OFF
ON*1
*1  You can still make calls using an external...

Appendix

13
Appendix
Specifications ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙13-2
General  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙13-2
Copier  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙13-3
Printer  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙13-4
Facsimile...

Appendix
13-2

Specifications
General
Type●Personal Desktop
Power Source●120–127 V, 60 Hz (Power requirements differ depending 
on the country in which you purchased the product.)
Power Consumption●Max.: Less than 780 W
Warm-up Time●MF6595cx/MF6595: less than 16.0 sec.*
MF6590/MF6540/MF6520: less than 13.5 sec.* (from when 
main power switch is turned on until standby display 
appears, when temperature is 20°C and humidity is 65%)
Warm-up time may differ depending on the condition 
and environment of...

13-3
Appendix

General
Environmental 
Conditions
●Temperature: 59°F–86°F (15°C–30°C)
Humidity: 10%–80% RH 
Display Languages●ENGLISH/FRENCH/SPANISH/PORTUGUESE
Acceptable Documents●» p. 2-2.
Acceptable Paper Stock●» p. 2-8.
Printable Area●» p. 2-10.
Scanning Area●» p. 2-3.
Copier
Scanning Resolution●600 dpi x 600 dpi
Printing Resolution●1200 dpi enhanced x 600 dpi
Magnification●1:1 ± 1.0%, 1:2.00, 1:1.29, 1:0.78, 1:0.64, 1:0.50
Zoom 0.50–2.00, 1% increments
First Copy Time●Platen glass: less than 8 sec....