Canon printer imageCLASS MF6595CX User Manual
Here you can view all the pages of manual Canon printer imageCLASS MF6595CX User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 201
Maintenance 10-26 Transporting the Machine Follow this procedure to avoid vibration damage to the machine when transporting it over a long distance. 1 Turn off the main power switch. 2 Disconnect the power cord and all the cables from the back of the machine. 3 Open the left cover. 4 Grasp the blue plastic pull tab (A) on the toner cartridge. 5 Pull the blue plastic pull tab until you can easily hold the handle of the toner cartridge.
Page 202
10-27 Maintenance 6 Remove the toner cartridge. Always hold the toner cartridge by its handle. To avoid exposing the toner cartridge to light, place it in its protective bag or wrap it in a thick cloth. Do not open the drum protective shutter on the toner cartridge. Print quality may deteriorate if the drum surface is exposed to light or is damaged. 7 Close the left cover. Be careful not to get your fingers caught. – – – 8 Make sure the multi-purpose tray and the paper stopper are back in their...
Page 204
Troubleshooting 11 Troubleshooting Clearing Jams ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙11-2 Document Jams ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙11-2 Paper Jams ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙11-4 LCD Messages ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\ ∙∙∙11-7 Error Codes (MF6595cx/MF6595/MF6590...
Page 205
Troubleshooting 11-2 Clearing Jams When a jam occurs in the machine, the paper jam message appears on the LCD display. Check the jam location indicator where the jam occurs, then remove the jammed paper. Check the following if you experience repeated paper jams: Fan and tap the paper stack on a flat surface before loading it in the machine. Check that the paper you are using meets the requirements for use. (See “Paper Requirements,” on p. 2-8.) Make sure you have removed any scraps of paper...
Page 206
11-3 Troubleshooting 3 Lift the document feeder tray. 4 Remove any jammed documents. 5 Lower the document feeder tray and close the ADF cover. Be careful not to get your fingers caught. 6 Open the ADF and then hold both sides of any jammed documents and gently pull them out. 7 Close the ADF. Be careful not to get your fingers caught.
Page 207
Troubleshooting 11-4 Paper Jams When appears on the LCD display, remove jammed paper from inside the machine first, then from the paper cassette if necessary. If you experience repeated paper jams, check the following: Even the edge of the paper stack by a flat surface before loading it into the machine. Check that the paper you are using meets the requirements for use. (See “Paper Requirements,” on p. 2-8.) Make sure you have removed any scraps of paper from inside the machine. Main Unit 1...
Page 208
11-5 Troubleshooting 4 Lift and hold the transcription frame (A), then remove the jammed paper (only for two-sided copying). 5 Close the left cover. Be careful not to get your fingers caught. 6 Pull out the paper cassette and push the corners of the stack under the small fins. 7 Gently push the paper cassette back into the machine until it clicks. Be careful not to get your fingers caught.
Page 209
Troubleshooting 11-6 Paper Cassette 2 If you use the paper cassette 2*, follow this procedure to remove the jammed paper from the paper cassette 2*. 1 Open the left cover and then open the left side cover of the paper cassette 2*. Remove any jammed paper. * The paper cassette 2 is optional for MF6595 and standard for MF6595cx. 2 Close the left side cover of the paper cassette 2*. ●3 Pull out the paper cassette 2* and remove any jammed paper. 4 Push the corners of the stack under the small fins...
Page 210
11-7 Troubleshooting LCD Messages See the table below when the LCD displays error and status messages. MessageDescriptionAction ADJUSTING WAITING TO SCAN The machine is not ready for scanning. Wait until the machine is ready. AUTO REDIAL This message appears when the recipient is engaged in direct sending and the job is waiting. Disappears when the transmission restarts. CHANGE PAPERSIZE The size of the paper in the paper cassette or multipurpose tray is different from that of the paper...