Canon printer imageCLASS MF6595 User Manual

Before Using the Machine
1-6

U [Tone] key
Press to switch from rotary pulse to tone dialing.
V [2 on 1] key
Press to set 2 on 1 copying.
W [Frame Erase] key
Press to set frame erase for copying.
X [Collate] key
Press to set collate copies.
Y Additional Functions key
Press to select or cancel the modes in 
Additional Functions.
Z [2-Sided] key
Press to set two-sided copying or faxing.
a [Enlarge/Reduce] key
Press to enlarge or reduce copy ratio.
b [Density] key
Press to adjust the density for copy or...

1-7
Before Using the Machine

Fax Operation Panel (MF6595cx/MF6595/MF6590 Only)
A [Direct TX] key
Press to set Direct Sending.
B [Pause] key
Press to insert a pause when entering a fax 
number.
C [Hook] key
Press when you want to dial without lifting the 
handset of the external telephone.
D [Redial] key
Press to redial the last dialed number when fax 
is standing by.
E [Coded Dial] key
Press to specify recipients registered under 
coded speed dialing codes.
F [Address Book] key
Press to search...

Before Using the Machine
1-8

LCD (Standby Mode)
Copy Mode
MF6595/MF6590/MF6540/MF6520
01100%LTR
ATEXT
MF6595cx or MF6595 with the 
optional cassette
01100%AUTO
ATEXT
A Zoom ratio
B  Paper size
C  Quantity
D  Density
E  Image quality
●
●
Fax Mode (MF6595cx/MF6595/
MF6590 Only)
12/31/2007MON15:50
FaxOnlySTANDARD
A Date & Time
B  Receive mode
C  Image quality
Scan Mode
SCANNING  MODE
Depending on your needs, you can change the standby display which appear\
s when the main power switch is 
turned on. For...

1-9
Before Using the Machine

Toner Cartridge
The lifetime of the Canon genuine starter toner cartridge which comes with the 
machine is approximately 2,500 pages, the Canon genuine replacement toner 
cartridge is approximately 5,000 pages. The page counts are on the basis of “ISO/IEC 
19752”* when printing A4 size paper with the default print density setting. The level 
of toner consumption varies depending on the type of documents printed. If your 
average document contains a lot of graphics, tables,...

Before Using the Machine
1-10

Maintaining the Toner Cartridge
Keep the toner cartridge away from computer screens, disk drives, and floppy disks. The 
magnet inside the toner cartridge may harm these items.
Avoid locations subject to high temperature, high humidity, or rapid changes in 
temperature.
Do not expose the toner cartridge to direct sunlight or bright light for more than five 
minutes.
Store the toner cartridge in its protective bag. Do not open the bag until you are ready to 
install the...

1-11
Before Using the Machine

Telephone Line Setting (MF6595cx/MF6595/MF6590 Only)
Setting the Telephone Line Type
The default setting is .
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK]. 

Before Using the Machine
1-12

4 Press [] or [] to select , then press [OK].
5 Press [] or [] to select the telephone line type, then press [OK].
: Tone dialing
: Pulse dialing
If you do not know the type of telephone line you use, contact your loca\
l telephone company.
6 Press [Stop] to return to the standby mode. 

1-13
Before Using the Machine

Timer Settings
Setting the Sleep Mode
When the machine remains idle for a certain period of time, it automatically enters the 
Sleep mode. The default settings are  and .
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK].
4 Press [] or [] to select , then press [OK]. 

Before Using the Machine
1-14

5 Press [] or [] to select the desired interval, then press [OK].
You can set the interval from 3 to 30 minutes (in one-minute increments).
You can also enter values using the numeric keys.
6 Press [STOP] to return to the standby mode.
To enter the Sleep mode manually, press [Power] on the operation panel.
The machine will not enter the Sleep mode when:
the machine is in operation
the Processing/Data indicator lights or flashes
a message appears on the display and the...

1-15
Before Using the Machine

Setting Auto Clear Time
If the machine remains idle for a certain period of time, the display returns to the standby 
mode (Auto Clear function).
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK].
4 Press [] or [] to select , then press [OK].