Canon printer imageCLASS MF6595 User Manual

What Can I Do with This Machine?
xxx

Users in Canada
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk. See p. 13-2 for the machine’s weight and dimensions.
B. Order Information
1. Provide only a single-line to touch-tone or rotary telephone set termina\
ted with a standard 
4-pin modular phone plug. (Touch-tone is recommended if available in yo\
ur area.)
2.  Order an CA11A modular jack (USOC code), which should be installed by \
the...

xxxi
What Can I Do with This Machine?

Notice
This equipment meets the applicable Industry Canada Terminal Equipment Technical 
Specifications. This is confirmed by the registration number. The abbreviation, IC, before 
the registration number signifies that registration was performed based on a Declaration of 
Conformity indicating that Industry Canada technical specifications were met. It does not 
imply that Industry Canada approved the equipment.
Cet appareil est conforme aux Spécifications...

What Can I Do with This Machine?
xxxii

Users should not attempt to make such connections themselves, but should\
 contact the appropriate electric 
inspection authority, or electrician, as appropriate.
This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment 
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences d\
u Règlement sur le matériel brouilleur du 
Canada.
The Ringer Equivalence Number (REN) for this terminal equipment is...

xxxiii
What Can I Do with This Machine?

Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product 
under the U.S. Department of Health and Human Services (DHHS) Radiation Performance 
Standard according to the Radiation Control for Health and Safety Act of 1968. This means 
that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective 
housings and external covers, the laser beam cannot...

What Can I Do with This Machine?
xxxiv 

Before Using the Machine

1
Before Using the 
Machine
Machine Components ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙1-2
Operation Panel  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙1-4
Main Operation Panel  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙1-4
Fax Operation Panel (MF6595cx/MF6595/MF6590 Only)  ∙∙∙∙∙∙1-7
LCD (Standby Mode)  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\...

Before Using the Machine
1-2

Machine Components
A ADF (Automatic Document Feeder)
Holds documents and feeds them automatically 
into the scanning area.
B Slide guides
Adjusts to the width of the document.
C Document feeder tray
Holds documents.
D Document delivery tray
Receives documents.
E Paper delivery tray
Receives copies, prints and faxes.
F Paper stopper
Prevents the paper from falling off the paper 
delivery tray.
Open the stopper from its original position 
for LTR/A4 paper. For LGL paper, pull...

1-3
Before Using the Machine

I Left cover
Open this cover when replacing the toner 
cartridge or clearing paper jams.
J Scanning area
Scans documents from the ADF.
K Platen glass cover
Open this cover when placing a document on 
the platen glass.
L Platen glass
Place documents.
M Multi-purpose tray
Feeds non-standard size or thick/thin type 
paper stacks.
N Slide guides for multi-purpose tray
Adjusts to the width of the paper.
O Multi-purpose tray extension
Pull out to load paper stack.
P USB port...

Before Using the Machine
1-4

Operation Panel
Main Operation Panel
MF6595cx/MF6595/MF6590●
MF6540/MF6520● 

1-5
Before Using the Machine

A Paper Select indicator
Indicates the selected paper source.
*   The number of paper sources varies 
depending on the model used.
B Jam Location indicator
Indicates the location of paper jams.
C LCD display
Displays messages and prompts during 
operation. Displays selection, text, and numbers 
when adjusting the settings.
D [COPY ] key
Press to switch to the Copy mode.
E  [] key
Press to decrease the value for various settings. 
Also press to see the previous item in the...