Canon printer imageCLASS MF5730 User Manual

Making Copies5-2
Copying
5
Making Copies
NOTE
•When making copies on LTR-size paper after having continuously copied on paper 
smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty, 
wait about 1 minute before making copies.
•When making copies of a small size or heavy paper*, etc., the copy speed may be 
slightly slower than usual.
* The paper type should be selected in the Menu. (See “Specifying the Paper Type,” on p. 
2-11.)
•If you intend to make a copy and print...

Making Copies5-3
Copying
5
5Press [Start].
NOTE
•To cancel copying, press [Stop/Reset] ➞ follow the instructions in the LCD.
You can also cancel copying using [Status Monitor]. (See “Confirming and Deleting a 
Copy Job,” on p. 7-3.)
•When you cancel copying while scanning a document from the ADF, the document may 
jam in the ADF. If the paper jam occurs, the LCD displays , or 
. (See “Removing Jammed Paper from the ADF,” on p. 9-7.) 

Setting Enlarging/Reducing5-4
Copying
5
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom 
copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1Press [Enlarge / Reduce].
2Press [((-)] or [)(+)] to select the copy ratio ➞ press [Set].
You can select from the following:
-200%  MAX.
-129%  STMT ➞ LT R  
-100%
- 78%  LGL ➞ LT R
-64% 
-50%  MIN.
NOTE
•If the  setting of  menu in the Menu is set to 
 or , the preset copy ratios will be as follows:...

Setting Enlarging/Reducing5-5
Copying
5
Enlarging/Reducing Using Custom Copy Ratios
1Press [Enlarge / Reduce] twice.
2Use the numeric keys to enter the copy ratio ➞ press [Set].
•You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
•Even after entering the copy ratio, you can use [((-)] or [)(+)] to adjust the copy 
ratio. To increase the copy ratio, press [)(+)]. To decrease the copy ratio, press 
[((-)].
NOTE
•Enlarging or reducing using preset copy ratio is not available with...

Improving Copied Image5-6
Copying
5
Improving Copied Image
Adjusting the Image Quality (Resolution)
You can adjust image quality to the appropriate level best suited for a document 
with text or photos. Three modes are available for adjusting the image quality.
1Press [Image Quality].
2Press [Image Quality] repeatedly until the image quality you want 
appears.
You can select from the following:
-  for text-only documents
-  for photographs
-  for documents with text and photographs.
NOTE
Copy exposure...

Improving Copied Image5-7
Copying
5
Adjusting Manually
1Press [Exposure] to select the manual mode.
2Press [((-)] or [)(+)] to adjust the copy exposure ➞ press [Set].
For a lighter copy exposure, press [((-)]. 
For a darker copy exposure, press [)(+)].
NOTE
When setting the exposure lighter, the indicator moves to the left. When setting the 
exposure darker, the indicator moves to the right.
➞EXPOSURE
-LT              DK+100%        LTR
      TEXT/PHOTO01 

Special Features5-8
Copying
5
Special Features
The machine has the following SPECIAL COPY features. These features allow you 
to sort copies in page order and create special copies easily.
- Collate Copy
Sorts copies in page order.
-2 on 1
Reduces two documents to fit on a single paper.
-Reserve Copy
Reserves the next job while the machine is printing out.
Collate Copy
The collate copy allows you to sort copies in page order. It is convenient when you 
make multiple copies of multiple page documents....

Special Features5-9
Copying
5
3Use the numeric keys to enter the number of copies you want. 
You can set up to 99 copies.
4Press [Start].
The machine begins scanning from the first page of the document. After scanning, the 
scanned documents will come out in order.
NOTE
When scanning multiple page documents,  may appear in the LCD, 
and the document being scanned stops in the ADF. Press [Set] to make the document 
come out automatically. If the document does not come out, it may be jammed in the 
ADF....

Special Features5-10
Copying
5
6Press [Start].
The machine begins scanning the next page and prints only 1 copy. Repeat step 5 
and 6 to scan all documents, and prints only 1 copy of each document.
7Press [Set].
The machine begins printing rest of copies.
NOTE
When scanning multiple page documents,  may appear in the LCD 
and scanning is canceled. In this case, press [Stop/Reset] to return to the standby 
display, and reduce the documents to be scanned. Or change the image quality mode to 
.
2 on 1 Copy...

Special Features5-11
Copying
5
3Use the numeric keys to enter the number of copies you want.
You can set up to 99 copies.
4Press [Start].
NOTE
If  appears in the LCD while scanning, the document being scanned 
stops in the ADF.  Press [Set] to make the document come out automatically. If the 
document does not come out, it may be jammed in the ADF. Follow the procedure in 
“Removing Jammed Paper from the ADF,” on p. 9-7 to clear the paper jam in the ADF.
When Placing a Document on the Platen Glass
1Place...