Canon printer imageCLASS MF3240 User Manual

xx
What Can I Do with This Machine?
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted 
by the ACTA. On the rear panel of this equipment is a label that contains, among other 
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this 
number must be provided to the telephone company.
An FCC compliant telephone cord and modular jack are provided with this equipment. 
This equipment is designed to be connected to the...

xxi
What Can I Do with This Machine?
Rights of the Telephone Company
Should the equipment cause harm to the telephone network, the telephone company 
may temporarily disconnect service. The telephone company also retains the right to 
make changes in facilities and services which may affect the operation of this 
equipment. When such changes are necessary, the telephone company is required to 
give adequate prior notice to the user.
FCC Notice
imageCLASS MF3240: Model F189402
imageCLASS MF3241: Model...

xxii
What Can I Do with This Machine?
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15
of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise 
specified in this manual. If such changes or modifications should be made, you could 
be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-516-328-5600
The Telephone Consumer Protection Act of 1991 makes it unlawful for...

xxiii
What Can I Do with This Machine?
Users in Canada
Pre-Installation Requirements for Canon Facsimile 
Equipment
A. Location
Supply a suitable table, cabinet, or desk. See p. 13-1 for the machine’s weight and 
dimensions.
B. Order Information
1. Provide only a single-line to touch-tone or rotary telephone set terminated with a 
standard 4-pin modular phone plug. (Touch-tone is recommended if available in your 
area.)
2. Order an CA11A modular jack (USOC code), which should be installed by the...

xxiv
What Can I Do with This Machine?
Notice
This equipment meets the applicable Industry Canada Terminal Equipment Technical 
Specifications. This is confirmed by the registration number. The abbreviation, IC, 
before the registration number signifies that registration was performed based on a 
Declaration of Conformity indicating that Industry Canada technical specifications were 
met. It does not imply that Industry Canada approved the equipment.
Cet appareil est conforme aux Spécifications techniques...

xxv
What Can I Do with This Machine?
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate 
electric inspection authority, or electrician, as appropriate.
NOTE
This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment 
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel 
brouilleur du Canada.
The Ringer Equivalence Number (REN) for this terminal...

xxvi
What Can I Do with This Machine?
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser 
product under the U.S. Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for Health and Safety Act of 
1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective 
housings and external covers, the laser beam cannot...

xxvii
What Can I Do with This Machine? 

1-1
Before Using the Machine
Before Using the 
Machine
Machine Components
A Platen glass cover
Open this cover when placing a document on 
the platen glass.
B Platen glass
Place documents.
C Operation panel
Controls the machine.
D Output tray
Outputs printouts.
E Front cover
Open this cover when installing the toner 
cartridge or clearing paper jams.
F Multi-purpose feeder
Feeds paper when you insert one by one 
manually.
G Paper cassette
Holds the paper supply.
A
B
C
D
E
F
G 

1-2
Before Using the Machine
H Telephone line jack
Connect the telephone cable.
I External device jack
Connect an external device.
J USB port
Connect the USB (Universal Serial Bus) 
cable.
K Face up cover
Open this cover when outputting paper face 
up or clearing paper jams.
L Power socket
Connect the power cord.
M Extension cover
Protects paper supply in the paper cassette 
from dirt and dust.
HIJ
K
L
M