Canon printer imageCLASS MF249dw User Manual

4Aligntheedgesoftheenvelopeona5atsurface.
Loaded Orientation
Load the envelopes in portrait orientation, short edge  4rst, with the non-glued side (front side) face up.
Load envelopes in the same orientation for both the paper drawer and manual feed slot.
Load the envelopes so that their  5aps are at the left.
Basic Operations
53 

LoadingPreprintedPaper
1469-00Y
When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading.
Load the paper properly so that printing is performed on the correct side of the paper with a logo.
Making1-SidedPrintoutsonPaperwithLogos(P.54)
Making2-SidedPrintoutsonPaperwithLogos(MF249dw/MF247dw)(P.55)
This section mainly describes how to load preprinted paper with the proper facing and orientation. For a description of the general...

Making 2-Sided Printouts on Paper with Logos (MF249dw / MF247dw)
Load the paper with the front logo side (the side to print the  4rst page of the document) face down.
PrintingonPaperwithLogosinPortraitOrientation
PrintingonPaperwithLogosinLandscapeOrientation
Thesetting(MF249dw/MF247dw) When you print on preprinted paper, you need to change the facing of the paper to load each time you perform1-sided and 2-sided printing. However, if  is set to , the facing
that you use for loading...

SpecifyingPaperSizeandType
1469-010
You must specify the paper size and type settings to match the paper that is loaded. Make sure to change the paper
settings when you load the paper that is different from the previously loaded paper.
If the setting does not match the size and type of loaded paper, a paper jam or printing error may occur.
1Pressandtap.2Tapor.3Selecttheloadedpapersize.
	 If the loaded paper size is not displayed, tap .
4Selecttheloadedpapertype.Basic Operations
56 

WhenafrequentlyusedpapersizeisknownYou can set the machine to display only frequently used paper sizes in the selection screen.1Tap .2Tap .3Tap  or .4Select and checkmark a frequently used paper size.
Uncheckmarked paper sizes are displayed in the  screen.
5Tap .
LINKS
LoadingPaperinthePaperDrawer(P.47)
Paper(P.650)
Basic Operations
57       

RegisteringaCustomPaperSize
1469-011
You can register one frequently used custom paper size each for the paper drawer and manual feed slot.
1Pressandtap.2Tapor.3Tap.4Specifythepapersize.1Specify the length of the  (shorter) side. 	 Tap .
	 Input the length of the  side using 
/, with / to move the cursor between the digits
for inputting whole numbers and fractions, and tap .
2Specify the length of the  (longer) side.
	 Tap .
	 Input the length of the  side, and tap .
Basic Operations
58 

 
3Tap .
5Selectthepapertype.
LINKS
LoadingPaperinthePaperDrawer(P.47)
LoadingPaperintheManualFeedSlot(P.50)
Basic Operations
59       

RegisteringintheAddressBook
1469-012
 You can register frequently used fax/scan destinations in the Address Book and
easily select them when needed. You can register up to 104 destinations in the
Address Book. Destinations can be searched alphabetically, from lists in the Address Book, or by entering three-digit numbers (coded dial numbers) ( 
Registering
DestinationsintheAddressBook(P.61) ). You can also specify destinations more
quickly by using the following features.
	C One-Touch Dial...

RegisteringDestinationsintheAddressBook
1469-013
You can register up to 100 destinations for Coded Dial in the Address Book. You can edit or delete destinations that
you have registered.
	 E-mail addresses can be registered as destinations on the MF249dw / MF247dw only.
1Pressandtap.2Tap.
	If a screen appears prompting you to enter a PIN, enter the correct PIN using the numeric keys, and tap
. 
SettingaPINforAddressBook(P.415)
3SelectSelecttypeofaddresstoregister.
	 According...

Makingdetailedsettings(onlywhenregisteredforfax)
After tapping , a screen similar to the following is displayed.

If an error occurs in an image that is being sent, the error is checked and corrected to prevent an improper
image from being sent when setting .

If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjust the transmission start speed downward incrementally starting from "33600 bps".

Specify  to  according to the transmission...