Canon printer imageCLASS MF249dw User Manual

CancelingCopies
1469-01C
If you want to cancel copying immediately after pressing 
, tap  on the screen or press  on the
operation panel. You can also cancel copying after checking the copy status.
	C Tap  on the Screen That is Displayed While Copying
	C Press  to Cancel
IftheScreenDisplaysaListofDocumentsWhenisPressed
Documents have been scanned and are waiting to be printed. Select the copy document to cancel.
	C
Use  to Cancel
      
Copying
83 

Copydetails
The number of copies, settings, and other details are displayed. If you only want to check the details without canceling copying, press 
 to return to the copy main screen.

Cancels copying.
LINKS
BasicCopyOperations(P.81)
Copying
84    

VariousCopySettings
1469-01E
A variety of settings are available to suit your needs, such as when you want to save paper or make your documents easier to read.
EnlargingorReducing(P.86)SelectingDocumentType(P.87)AdjustingDensity(P.88)AdjustingSharpness(P.89)2-SidedCopying(MF249dw/
MF247dw)(P.91)CopyingMultipleDocuments
ontoOneSheet(2on1/4on1)
(P.94)Usingthe
Button(P.96)CopyingBothSidesofanIDCard
ontoOnePage(P.98)CollatingCopiesbyPage(P.99)
Copying
85...

EnlargingorReducing
1469-01F
 You can enlarge or reduce copies by using a preset copy ratio such as LTR>,or by setting a custom copy ratio in increments of 1%.
    Select the copy ratio

Use 
/ or the numeric keys to enter the copy ratio, and tap . You can set any copy ratio from
25% to 400% in 1% increments.
Presetcopyratio
Select a copy ratio.
LINKS
BasicCopyOperations(P.81)
Copying
86    

SelectingDocumentType
1469-01H
 You can select the optical image quality for the copy depending on the document
type, such as text-only documents, documents with charts and graphs, or magazine photos.
    Select the document type

Suitable when copying documents that only contain text.

Suitable when copying documents that contain both text and photos. Priority is given to speed over image
quality.

Suitable when copying documents that contain both text and photos.

Suitable when copying documents that...

AdjustingDensity
1469-01J
 You can adjust the density of the copy if the text or images in a document are too
light or dark. You can also automatically set an optimal density for a document.
    Adjust the density  

Decreases the density.

Increases the density.

An optimal density for the document is automatically set.
 is automatically set to . ( 
SelectingDocumentType(P.87) )
LINKS
BasicCopyOperations(P.81)
AdjustingSharpness(P.89)
CorrectDensity(P.497)
Copying
88             

AdjustingSharpness
1469-01K
 You can adjust sharpness of the copied image. Increase the sharpness to sharpenblurred text and lines, or decrease the sharpness to improve the appearance ofmagazine photos.
    Adjust the sharpness  

Decreases the sharpness, resulting in a softer image.
Example:  If you want to improve the appearance of magazine photos

Increases the image sharpness.
Example:  If you want to sharpen text and lines written in pencil
Copying
89 

LINKS
BasicCopyOperations(P.81)
AdjustingDensity(P.88)
Copying
90       

2-SidedCopying
1469-01L
 You can copy two pages of a document on both sides of the paper. You can also copy
a two-sided document on both sides of the paper, or on two separate pages.	  may not be available with some sizes and types of paper.
Paper(P.650)
	  is not available when using  or .
Using the  enables you to combine 2-sided copying and /: UsingtheButton(P.96)
    Select the type of 2-sided copying
Typesof2-sidedcopying
The illustration below shows the types of 2-sided copying....

  2-Sided>    
	 If you want to copy landscape-oriented documents in book-type format (short-edge binding)
  2-Sided>    
2-Sided->2-Sided(MF249dw)
	 If you want to create copies with a different binding type than the original
  2-Sided>  Select the original orientation  Select the original
binding type 
 Select the binding type for the  4nished copy, which is different from that of the
original document
2-Sided->1-Sided(MF249dw)
This setting enables you to align the direction of the output paper....