Canon printer imageCLASS D550 User Manual

							6-3
Maintenance
 6  Remove the toner cartridge. 
      
 7  Remove any toner or paper debris from interior of 
the machine, with a clean, soft, dry, and lint-free 
cloth. 
 8  Insert the toner cartridge. 
 Fit the protrusions (A) on each side of the toner cartridge into the 
guides located on each side of the machine, and then slide the 
toner cartridge into the machine until the toner cartridge meets 
the back of the machine. 
     
(A)
(A)  
 9  Close the toner cover. 
 
  If you cannot close the toner cover 
 Ensure that the toner cartridge is properly set in the machine. 
 Do not try to forcefully close the toner cover, as this may damage 
the machine. 
  
 10  Lower the scanning platform. 
 11  Connect the power cord and turn ON the power  switch. 
 Cleaning the Fixing Unit  
 In the following cases, the fixing unit may be dirty. Clean the 
fixing unit. 
•   When black streaks appear on the printed paper 
•   When a toner cartridge is replaced 
 
Keys to be used for this operation
Menu
OK  
 1 Press [] (Menu). 
 2 Press [] or [] to select , and then press [OK]. 
     
 Menu
  Preferences
  Timer Settings
  Copy Settings
  Adjustment/Maintenan  
  
 3 Press [] or [] to select , 
and then press [OK]. 
     
 Adjustment/Maintenance
  Special Processing
  Clean Fixing Unit
 
 4  Load Letter size plain paper in the multi-purpose 
tray, and then press [OK]. 
 The cleaning process will start. Cleaning takes approximately 90 
seconds. 
     
Clean Fixing Unit
Load paper larger than 
A4/LTR in MP Tray.
Start
 
*   It is recommended that you use plain paper to clean the fixing 
unit. 
   If cleaning does not begin 
 When there are jobs stored in memory, this function is not 
available. 
  
 5 Press [] (Menu) to close the menu 
screen.  
						

							6-4
Maintenance
 Cleaning the Platen Glass  
 Follow this procedure to clean the platen glass and under 
surface of the feeder. 
 1  Turn OFF the power switch and disconnect the power cord. 
 2  Open the feeder. 
       
 3  Clean the platen glass and the under surface of 
the feeder. 
 (1)  Clean the areas with a cloth dampened with water. 
 (2)  Wipe the areas with a soft, dry cloth. 
       
 4  Close the feeder. 
 5  Connect the power cord and turn ON the power 
switch. 
 Cleaning the Feeder 
 If your documents have black streaks or appear dirty after 
scanning using the feeder, the roller inside the feeder may be 
dirty. Clean the feeder scanning area and roller. 
 1  Turn OFF the power switch and disconnect the power cord. 
 2  Open the feeder cover. 
       
 3  Clean the rollers (A) inside the feeder with a well 
wrung out cloth dampened with water, and then 
wipe the area with a soft, dry cloth. 
     
(A)  
 4  Close the feeder cover. 
 5  Connect the power cord and turn ON the power 
switch. 
 Precautions When Cleaning the Machine 
 Before cleaning the machine, check the following. 
•   Ensure no jobs are stored in memory, then turn OFF the  power switch and disconnect the power cord. 
•   Use a soft cloth to avoid scratching the components. 
•   Do not use tissue paper, paper towels, or similar materials  for cleaning. They can stick to the components or 
generate static charges.  
						

							6-5
Maintenance
  IMPORTANT  
 Do not touch the transfer roller (A). 
 Touching the transfer roller (A) may damage the machine. 
    
(A)  
  
 
 NOTE  
 If there is data waiting to be printed 
 The data is deleted when you turn OFF the power switch.  
    
  CAUTION 
 Precautions when cleaning the feeder 
 Do not dampen the cloth too much, as this may tear the 
document or damage the machine. 
 Precautions when closing the feeder 
 Be careful not to get your fingers caught. 
 Do not touch the fixing unit (A). 
 Touching the fixing unit (A) may cause burns as it becomes 
very hot during use. 
 
(A)
 
 Precautions if you get toner on your hands or clothing 
 If toner gets on your hands or clothing, wash them 
immediately with cold water. 
 Washing with warm water sets the toner, making it 
impossible to remove the toner stains.  
						

							6-6
Maintenance
 Toner cartridges are consumable products. When the toner has 
almost or completely run out in the middle of operating this 
machine, a message appears in the display, or the symptoms 
described below appears. Follow a proper resolution 
depending on the message or symptom. 
  
  IMPORTANT  
 About toner cartridges 
 For details on the toner cartridge yields and the procedures for 
handling toner cartridges and checking the toner level, see the 
following. 
 
 About the Supplied Toner Cartridge (àP.6-6 ) 
 
 About Replacement Toner Cartridge ( àP.6-6 ) 
 
 Handling Toner Cartridge (àP.6-6 ) 
 
 Using the Toner Saver Mode (àP.6-7 ) 
 
 Purchase Consumables (àP.6-12 ) 
*   The yields of the toner cartridges included in this machine differ  from those of replacement toner cartridges. 
    
If the toner almost runs out, white streaks appear on the 
printouts or some parts are faded.  
* 
No message appears on the display even if the toner almost runs 
out. Replace the toner cartridge when white streaks appear on 
the printouts or some parts of the printout are faded.
 If the above symptoms appear 
   
Follow the procedure in the section below before replacing 
the toner cartridge. You may print for some
time, until the toner completely runs out.
  “Before Replacing the Toner Cartridge“ (
àP.6-8)
 If print result is not improved 
   
If white streaks or faded parts continue to appear after 
following the procedure in the section above, replace the 
toner cartridge.
  “Replacing the Toner Cartridge“ (àP.6-9)
  
   About  the  Supplied  Toner  Cartridge 
 The average yield of the included toner cartridge is as follows. 
Canon Cartridge 
128 Starter Average yield*1: 1,000 sheets
 *1  The average yield is on the basis of “ISO/IEC 19752”*2 when printing 
A4 size paper with the default print density setting. 
 *2  “ ISO/IEC 19752” is the global standard related to “Method for  the determination of toner cartridge yield for monochromatic 
electrophotographic printers and multi-function devices that 
contain printer components” issued by ISO (International 
Organization for Standardization). 
 The average yield of the replacement toner cartridge is 
different from which of the supplied toner cartridge. 
  
   About  Replacement  Toner  Cartridge 
 Purchase the toner cartridge at your local authorized Canon 
dealer. 
 Replace the toner cartridge according to the description in the 
following charts. However, you may need to replace the toner 
cartridge earlier than the described life time depending on 
installation environment of the machine, the printing paper 
size, or the document type. 
Toner cartridge  Target for replacing toner cartridge 
Canon Cartridge 128 Average yield*1 : 2,100 sheets 
 
*1  The average yield is on the basis of “ISO/IEC 19752”*2 when printing 
A4 size paper with the default print density setting. 
 *2  “ ISO/IEC 19752” is the global standard related to “Method for  the determination of toner cartridge yield for monochromatic 
electrophotographic printers and multi-function devices that 
contain printer components” issued by ISO (International 
Organization for Standardization). 
  
  IMPORTANT  
 About Replacement Toner Cartridge 
 For optimum print quality, replacing the toner cartridge with 
Canon genuine ones is recommended. 
Model name  Supported Canon genuine toner cartridge 
D550 Canon Cartridge 128
  
  
   Handling  Toner  Cartridge  
 Note the following when handling the toner cartridge. 
   Replacing  Toner  Cartridges   
						

							6-7
Maintenance  IMPORTANT  
 Handling toner cartridge 
•   Keep the toner cartridge away from computer screens, disk drives, and floppy disks. They may be damaged by magnet 
which is in inside of the toner cartridge. 
•   Avoid locations subject to high temperature, high humidity, or  rapid changes in temperature. 
•   Do not expose the toner cartridge to direct sunlight or bright  light for more than five minutes. 
•   Store the toner cartridge in its protective bag. Do not open  the bag until you are ready to install the toner cartridge in the 
machine. 
•   Keep the protective bag for the toner cartridge. They are  required when transporting the machine such as during 
relocation. 
•   Do not store the toner cartridge in a salty atmosphere or where  there are corrosive gases such as from aerosol sprays. 
•   Do not remove the toner cartridge from the machine  unnecessarily. 
•   Print quality may deteriorate if the drum surface is exposed to  light or is damaged. 
•   Always hold the toner cartridge by its handle to avoid touching  the drum. 
•   Do not place the toner cartridge in an upright or an upside  down position. If the toner is kept upright or upside down, the 
toner will solidify and may not return to its original condition 
even if it is shaken. 
•   When disposing of a used toner cartridge, place the toner  container into its protective bag to prevent the toner from 
scattering, and then dispose of the toner cartridge according to 
local regulations. 
 Be careful of counterfeit toner cartridges. 
 Please be aware that there are counterfeit Canon toner cartridges 
in the marketplace. 
 Use of counterfeit toner cartridges may result in poor print quality 
or machine performance. 
 Canon is not responsible for any malfunction, accident or damage 
caused by the use of counterfeit toner cartridge. 
 For more information, see http://www.canon.com/counterfeit. 
  
   Using  the  Toner  Saver  Mode 
 Set whether or not to conserve toner when copying. 
  NOTE  
 If you want to conserve toner when printing 
 Set to use [ Toner Save] on the [Quality] tab of the printer driver. 
 
 e-Manual à Print à Printing Functions à [Quality] Sheet 
  
 
Keys to be used for this operation
Menu
OK  
  
 1 Press [] (Menu). 
 2 Press [] or [] to select , and 
then press [OK]. 
     
Menu
 Preferences
 Timer Settings
 Copy Settings
 Adjustment/Maintena
...  
 3 Press [] or [] to select , 
and then press [OK]. 
     
Preferences
 Display Settings
 Toner Saver Mode
 Paper Feed Method Sw
...
 
  
 4 Press [] or [] to apply the toner saver mode to 
an operation, and then press [OK]. 
     
Toner Saver Mode
 Copy
 
  CAUTION 
 Do not place the toner cartridge in fire. 
 This may cause toner remaining inside the cartridge to ignite 
and result in burns. 
 If toner leaks from the toner cartridge 
 Be careful not to inhale the toner or allow it to come into 
direct contact with your skin. If the toner comes into contact 
with your skin, wash with soap. If the skin becomes irritated 
or you inhale the toner, consult a physician immediately. 
 When removing a toner cartridge 
 Ensure to remove it carefully. If not removed with care, the 
toner powder may scatter and come in contact with your 
eyes and mouth. If toner gets into your eyes or mouth, wash 
them immediately with cold water and consult a physician. 
 Keep the toner cartridge away from small children. 
 If the toner or other parts are ingested, consult a physician 
immediately. 
 Do not disassemble the toner cartridge. 
 The toner may scatter and get into your eyes or mouth. If 
toner gets into your eyes or mouth, wash them immediately 
with cold water and consult a physician.  
						

							6-8
Maintenance
 5 Press [] or [] to select  or , and 
then press [OK]. 
     
Copy
 Off
 On
 
  
 Do not use the toner saver mode.
 Use the toner saver mode.
  NOTE  
 When the  is set to  
 You may conserve toner, however, the output may be less clear and 
thin lines or light colors may be printed unclearly. 
  
  
 6 Press [] (Menu) to return to standby 
mode. 
  
   Before  Replacing  the  Toner  Cartridge 
   
Before replacing the toner cartridge, see “Replacing the Toner 
Cartridge” (àP.6-9)
 
 If the toner almost runs out, follow the procedure below 
before replacing the toner cartridge. You may print for some 
time, until the toner is completely run out. 
 1  Hold the operation panel. 
       
 2  Lift the scanning platform. 
  
    
  
 If you cannot lift the scanning platform 
 Ensure that the feeder is completely closed. 
 Do not try to forcefully lift the scanning platform, as this may 
damage the machine. 
 *   If you set thick documents such as a book, the feeder may not be 
completely closed. Remove the documents. 
  
  
 3  Hold the grip on the left front side of the toner  cover. 
       
 4  Open the toner cover. 
  
    
 5  Remove the toner cartridge. 
  
     
						

							6-9
Maintenance
 6  Gently shake the toner cartridge five or six times to evenly distribute the toner. 
       
 7  Insert the toner cartridge. 
 Fit the protrusions (A) on each side of the toner cartridge into the 
guides located on each side of the machine, and then slide the 
toner cartridge into the machine until the toner cartridge meets 
the back of the machine. 
  
  
(A)
(A)  
 8  Close the toner cover. 
 
  If you cannot close the toner cover 
 Ensure that the toner cartridge is properly set in the machine. 
 Do not try to forcefully close the toner cover, as this may damage 
the machine. 
  
  
 9  Lower the scanning platform. 
  
  
     Replacing  the  Toner  Cartridge  
   
Before replacing toner cartridges, see “Precautions when 
Replacing Toner Cartridge” ( àP.6-11)
 
  
 1  Hold the operation panel. 
       
 2  Lift the scanning platform. 
  
    
   If you cannot lift the scanning platform 
 Ensure that the feeder is completely closed. 
 Do not try to forcefully lift the scanning platform, as this may 
damage the machine. 
*   If you set thick documents such as a book, the feeder may not 
be completely closed. Remove the documents. 
  
   
						

							6-10
Maintenance
 3  Hold the grip on the left front side of the toner cover. 
       
 4  Open the toner cover. 
  
    
 5  Remove the toner cartridge. 
  
    
 6  Take out the new toner cartridge from the 
protective bag. 
 You can open the protective bag with your hands from the notch. 
       
 7  Gently shake the toner cartridge five or six times 
to evenly distribute the toner. 
       
 8  Place the toner cartridge on a flat surface, lift the 
tab, and gently pull the sealing tape completely 
out. 
 The full length of the sealing tape is approximately 20” (50 cm). 
     
(2)
(1)
 
 9  Insert the toner cartridge. 
 Fit the protrusions (A) on each side of the toner cartridge into the 
guides located on each side of the machine,and then slide the 
toner cartridge into the machine until the toner cartridge meets 
the back of the machine. 
     
(A)
(A)   
						

							6-11
Maintenance
 10  Close the toner cover. 
 
  If you cannot close the toner cover 
 Ensure that the toner cartridge is properly set in the machine. 
 Do not try to forcefully close the toner cover, as this may damage 
the machine. 
  
  
 11  Lower the scanning platform. 
   
Precautions when Replacing Toner Cartridge 
   
See “Maintenance and Inspections” (àP.viii) in “Important 
Safety Instructions” as well.
 
  
  IMPORTANT  
 About replacement toner cartridge 
 For optimum print quality, replacement is recommended using 
genuine Canon toner cartridge. 
Model name  Supported Canon genuine toner 
cartridge 
D550 Canon Cartridge 128
 Shake the toner cartridge before setting 
 If toner is not distributed evenly, this may result in a deterioration in 
print quality. 
 Hold the toner cartridge properly 
 When handling the toner cartridge, hold them properly as shown 
in the figure. Do not place them vertically or upside-down. 
 Do not touch the toner cartridge memory (A) or the 
electrical contacts (B) 
 This may result in damage to the cartridge.  
     
(A)
(B)  
 Do not open the drum protective shutter (A). 
 Print quality may deteriorate if you touch or damage the drum 
inside of the drum protective shutter (A). Do not touch or open the 
drum protective shutter (A). 
  
  
(A)  
  WARNING 
 Do not dispose of a used toner cartridge in open 
flames 
 This may cause the toner remaining inside the cartridges 
to ignite, resulting in burns or fire. 
  CAUTION 
 Precautions if you get toner on your hands or 
clothing 
 If toner gets on your hands or clothing, wash them 
immediately with cold water. 
 Washing with warm water sets the toner, making it 
impossible to remove the toner stains. 
 Be careful not to allow the toner to scatter 
 Do not pull out the sealing tape forcefully or stop at 
midpoint, as this may cause toner to spill out. 
 If toner gets into your eyes or mouth, wash them 
immediately with cold water and consult a physician. 
 Precautions when lowering the scanning platform 
 Be careful not to catch your fingers.  
						

							6-12
Maintenance
 When pulling out the sealing tape 
•   Do not pull the sealing tape diagonally or sideways. If the tape breaks, this may become difficult to pull out completely. 
                          
•   Even if the sealing tape stops at midpoint, pull it out of the toner 
cartridge completely. 
•   If any tape remains in the toner cartridge, this may result in poor  print quality. 
 Disposing of the removed sealing tape 
 Dispose of the sealing tape according to local regulations. 
 Keep the protective bag 
 Keep the protective bag for the toner cartridge. You will need them 
when you remove the toner cartridge for machine maintenance or 
other purposes. 
 Do not touch the high-voltage contacts (A) 
 This may result in damage to the machine. 
(A)
 Do not leave the toner cover open for a long time with 
the toner cartridge installed. 
 This may result in a deterioration in print quality. 
  
 
 NOTE 
 About the packing materials 
 The packing materials may be changed in form or placement, or 
may be added or removed without notice. 
 Collecting used toner cartridges 
  “Recycling Used Cartridges” ( àP.6-13) 
  
  
   Purchase  Consumables 
 Purchase at your local authorized Canon dealer. 
 If you are not sure, contact the Canon help line.