Canon printer imageCLASS D340 User Manual

Loading Documents in the ADF
(Only for the imageCLASS D340 model)
3-4
1Make sure there is no document on the
platen glass.
2Fan the edges that will feed into the
machine first, then tap the edges of
multiple page documents on a flat surface
to even the stack.
3Adjust the slide guides to the width of the
document.
4Load the documents face up in the ADF.
• The document is now ready for scanning.
• For multiple page documents, the pages are
fed one by one from the top of the stack
(from the first page).
•...

3-5
The Paper Path of the Automatic Document Feeder
(Only for the imageCLASS D340 model)
• When documents are set in the ADF, the scanning unit moves to the position shown in the figure above
and it is fixed there. 
When documents are not set in the ADF, the scanning unit moves to scan it.NOTE
3 2
1
4
Scanning 
unitThe machine scans documents
from the first page.
Document Handling
3 

3-6 

4-1
For information on the types of documents you can copy, their requirements, and details on setting up documents,
→Chapter 3.
Copying Documents
Documents You Can Copy
Making Copies
4
Making Copies
Chapter 4
1Prepare the document and load it face up in
the ADF* or place it face down on the
platen glass.
* Only for the imageCLASS D340 model
2Set copy features if you wish. You can set
the features below.
• Copy quantity (→p. 4-3)
• Enlarging/reducing (→p. 4-5)
• Image quality (→p. 4-6)
• Exposure (→p....

4-2
Canceling the Copy Job
While Scanning Documents in the ADF
(Only for the imageCLASS D340 model)
After Scanning Documents
1Press Stop/Reset.2Press 4(–) for YES.
CANCEL COPYING?

1Press Stop/Reset.2Press Set.
• The document that has stopped in the ADF will
come out. STOP KEY PRESSED
PRESS SET KEY 

4-3
Making Copies
4
Making Multiple Copies
You can make multiple copies.
Specifying the Paper Size and the Type
(Common for Cassette and Multi-purpose Tray)
• When making copies on letter-size paper after having continuously copied on paper smaller than letter-
size paper, the copies may be dirty. To prevent copies from being dirty, wait about one minute before
making copies.
• The paper in the multi-purpose tray is copied prior to the paper in the cassette.
• The settings changed in the Additional...

4-4
* When FREESIZEis selected, specify the horizontal and vertical size of the paper in millimeter (mm).
Available setting range in horizontal size : 5” (127 mm) to 14” (356 mm)
Available setting range in vertical size : 3” (76 mm) to 8 
1/2” (216 mm)
Refer to the following conversion table for inches and millimeters.
Specifying the Paper Type
PLAIN PAPERis selected as the default paper type. When making copies on paper other than plain paper, you
can specify the paper type according to the following....

4-5
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
Enlarging/Reducing Using Custom Copy Ratios 
Making Copies
4
1Press Enlarge/Reduce.
Ex:
2Use 4(–)or e(+)to select the copy
ratio.
Ex:
• You can select from the following:
- 200% MAX.
- 129% STMT→ LTR
- 100%
- 78% LGL→ LTR
- 64%
- 50% MIN.
3Press Set.
Ex:
• If the PAPER SIZE GROUPof COPY
SETTINGSin the Additional Functions is
set to Aor...

4-6
Setting the Image Quality
You can adjust image quality to the appropriate level best suited for a document with text or photos. Three modes
are available for adjusting image quality.
Adjusting the Copy Exposure
You can adjust the copy exposure automatically or manually according to how light or dark your document is.
Adjusting Automatically
Adjusting Manually
1Press Image Qualityto select the image
quality.
Ex:
Each time Image Qualityis pressed, the image
quality mode changes as follows:
–TEXT...

4-7
Making Copies
4
The machine has the following SPECIAL COPY features. These features allow you to sort copies in page order,
and create special copies easily.
–Collate Copy
Sorts copies in page order.
–2 on 1
Reduces 2 letter-size documents to fit on a single letter-size paper.
–Reserve Copy
Reserves the next job while the machine is printing out.
Collate Copy
The collate copy allows you to sort copies in page order. It is convenient when you make multiple copies of
multiple page documents.
When...