Canon printer imageCLASS D1170 User Manual

xx
Legal Notices
Legal Notices
Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 14, “Appendix,” for specific 
dimensions and weight.
B.

  Order Information
1. A single telephone line (touch-tone or rotary) should be used.
2.  Order an RJ11-C telephone wall jack (USOC), which should be installed by the telephone company. If 
the RJ11-C wall jack is not present, telephone/facsimile operation...

xx
Legal Notices
Legal Notices
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the 
rear panel of this equipment is a label that contains, among other information, a product identifier in the 
format of US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of devices that may be connected to 
a telephone line. Excessive...

xx
Legal Notices
Legal Notices
Rights of the Telephone Company
If this equipment (imageCLASS D1180/D1170/D1150/D1120) causes harm to the telephone network, the 
telephone company may temporarily disconnect service. The telephone company also retains the right to 
make changes in facilities and services that may affect the operation of this equipment. When such changes 
are necessary, the telephone company is required to give adequate prior notice to the user.
However, if advance notice is not...

xx
Legal Notices
Legal Notices
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It should be 
independent from copiers, heaters, air conditioners, or any electric equipment that is thermostatically 
controlled. The rated value is 115 volts and 15 amperes. The CA11A modular jack should be relatively 
close to the power outlet to facilitate installation.
Notice This product meets the applicable Industry Canada technical specifications....

xxv
Legal Notices
Legal Notices
Utilisation au Canada
Conditions à Remplir Préalablement à L’installation d’un Télécopieur Canon
A. Emplacement
Prévoir une table, un meuble, ou un bureau suffisamment solide et de taille appropriée (voir le chapitre 
15, Annexe (Appendix), pour les indications de poids et dimensions).
B.

  Installation téléphonique
1. Une seule ligne téléphonique (tonalités ou impulsions) doit ê\
tre utilisée.
2.  Il faut commander un jack modulaire CA11A qui sera installé par la...

xxv
Legal Notices
Legal Notices
RemarquesLe présent matériel est conforme aux spécifications techniques applicables d’Industrie Canada.
Avant d’installer cet appareil, l’utilisateur doit s’assurer qu’il est permis de le connecter à l’équipement de la 
compagnie de télécommunication locale et doit installer cet appareil en utilisant une méthode de 
connexion autorisée. Il se peut qu’il faille étendre la circuiterie intérieure de la ligne individuelle d’abonné, 
qui a été installée par la compagnie, au...

xxvi
Laser Safety
  Laser  Safety  
      La se r S afe ty  Laser Safety 
 This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product under the U.S. 
Department of Health and Human Services (DHHS) Radiation Performance Standard according to the 
Radiation Control for Health and Safety Act of 1968. This means that the machine does not produce hazardous 
radiation. 
 Since radiation emitted inside the machine is completely confined within protective housings and external 
covers,...

Before Using the Machine
1
Before Using the 
Machine
This chapter describes what you should know before using this machine, such as the names of the parts and their 
functions, and basic settings to use various functions.
Machine Components ................................................. 1-2
External View (Front)  ..........................................................1-2
External View (Back)  ............................................................1-4
Internal View...

Before Using the Machine
1-2
Machine Components
Machine Components
This section describes the parts names of the machine and their functions.
External View (Front) 

Before Using the Machine
1-3
Machine Components
①ADF (Automatic Document Feeder)Holds documents and feeds them automatically 
into the scanning area.
②Slide guides Adjust to the width of the document.
③Document feeder tray Holds documents.
④Document delivery tray Receives documents.
⑤Operation panel Controls the machine.
⑥Multi-purpose tray Feeds non-standard size or thick/thin type paper 
stacks.
⑦Multi-purpose tray extension  Pull out to load paper stack.
⑧Slide guides for multi-purpose tray Adjusts to...