Canon printer imageCLASS D1170 User Manual

Documents and Print Media 
2-4
Placing Documents
Placing Documents
This section describes how to place your documents on the platen glass and in the ADF.
On the Platen Glass
1 
Open the ADF.
2 
Place a document face down.
3 
Align the document with the appropriate 
paper size marks.
If your document does not match any of the 
paper size marks, align the center of your 
document with the arrow mark. 

Documents and Print Media 
2-5
Placing Documents
4 
Close the ADF.
The document is ready for scanning.
When closing the ADF, be careful not to get 
your fingers caught, as this may result in 
personal injury.
Do not press down the ADF forcefully, as this 
may damage the platen glass and cause 
personal injury.
–
–
Remove the document from the platen glass 
when scanning is complete.
In the ADF
1 
Fan the document stack and even the 
edges.
2 
Adjust the slide guides to the width of the 
documents.
3...

Documents and Print Media 
2-6
Paper Requirements
Paper Requirements
Paper cassetteMulti-purpose tray
Size (W × L) LTR, LGL, A4, B5, A5, Executive, 
Oficio, Brazil-Oficio, Mexico-Oficio, 
FLSP, A-FLS, Government-LTR, 
Government-LGL3" × 5" to Legal (8 1/2" × 14")
(76 × 127 to 216 × 356
 mm)
Weight 16 to 32
  lb (60 to 120 g/m2)16 to 51 lb (60 to 190 g/m2)
Quantity 500 sheets maximum *
150 sheets maximum *1
TypePlain Paper *2○ ○
Plain Paper L *
2○ ○
Color *
3○ ○
Recycled *
4○ ○
Heavy Paper...

Documents and Print Media 
2-7
Paper Requirements
To prevent paper jams, do not use any of the following:Wrinkled or creased paper
Curled or rolled paper
Coated paper
Torn paper
Damp paper
Very thin paper
Paper which has been printed on using a thermal transfer printer (Do not copy on the reverse side.)
The following types of paper do not print well: Highly textured paper
Very smooth paper
Shiny paper
Make sure the paper is free from dust, lint, and oil stains.
Make sure to test paper before purchasing...

Documents and Print Media 
2-8
Printable Area
Printable Area
The shaded area indicates the approximate printable area of LTR paper and envelope. Note 
that the margin widths listed are approximate and there may be slight variations in actual 
use. 

Documents and Print Media 
2-9
Loading Paper
Loading Paper
This section describes how to load paper in the paper cassette and multi-purpose tray.
In the Paper Cassette
This section describes how to load paper in the 
paper cassette.
1 
Pull out the paper cassette.
2 
Hold the paper cassette with both hands 
and remove it from the machine.
Make sure to take the paper cassette out of the 
machine before loading paper. If paper is loaded 
while the paper cassette is partially pulled out, the 
paper cassette...

Documents and Print Media 
2-10
Loading Paper
4 
Hold the lock release lever of the rear 
paper guides (A) and slide the guides to 
the mark for the size of the paper to be 
loaded.
Make sure to set the guides to the mark for the 
size of the paper to be loaded correctly. If the 
guides are positioned incorrectly, it may cause 
paper jams, dirty prints, etc.
A6 size paper cannot be loaded.
–
–
5 
Fan the paper stack and even the edges.
6 
Load the paper stack of the appropriate 
size with the print side...

Documents and Print Media 
2-11
Loading Paper
7 
Hold the paper cassette with both hands 
and set it back into the machine.
8 
Push the paper cassette as far as it will go.
Be careful not to get your fingers caught.
For details on loading paper in the multi-
purpose tray, see “In the Multi-Purpose Tray,” on 
2-11.
In the same manner, load the paper into the 
optional paper cassette. For attaching the 
optional paper cassette, see the instruction 
sheet that comes with the optional paper 
cassette.
–
–
–...

Documents and Print Media 
2-12
Loading Paper
1 
Open the multi-purpose tray.
2 
Pull out the auxiliary tray.
3 
Adjust the slide guides to match the size 
of the paper.
If you are feeding large size paper, extend the 
tray extension.  

Documents and Print Media 
2-13
Loading Paper
4 
Load the paper into the multi-purpose 
tray.
Insert the paper stack as far as it will go.
■	Before inserting paper:
①	 When you use the multi-purpose tray to 
make copies, straighten out curled paper 
prior to use, as shown below. Curled paper 
may cause a paper jam.
②	If there is difficulty in straightening out 
curled paper, curl the front edges of the 
paper upward, as shown below.
■	To print on the back side of preprinted 
paper:
①	 Load the preprinted...