Canon printer FAXPHONE L120 User Manual

xix
What Can I Do with This Machine?
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted 
by the ACTA. On the rear panel of this equipment is a label that contains, among other 
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this 
number must be provided to the telephone company.
An FCC compliant telephone cord and modular jack are provided with this equipment. 
This equipment is designed to be connected to the...

xx
What Can I Do with This Machine?
FCC Notice
FAXPHONE L120: Facsimile Transceiver, Model F147400
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept an interference received, including interference that may 
cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to 
Part 15 of the FCC...

xxi
What Can I Do with This Machine?
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to 
use a computer or other electronic device to send any message via a telephone fax 
machine unless such message clearly contains in a margin at the top or bottom of 
each transmitted page or on the first page of the transmission, the date and time it is 
sent and an identification of the business or other entity, or other individual sending the 
message and the telephone number of the...

xxii
What Can I Do with This Machine?
Users in Canada
Pre-Installation Requirements for Canon Facsimile 
Equipment
A. Location
Supply a suitable table, cabinet, or desk. See p. 11-1 for the machine’s weight and 
dimensions.
B. Order Information
1. Provide only a single-line to touch-tone or rotary telephone set terminated with a 
standard 4-pin modular phone plug. (Touch-tone is recommended if available in your 
area.)
2. Order an CA11A modular jack (USOC code), which should be installed by the...

xxiii
What Can I Do with This Machine?
Notice
This equipment meets the applicable Industry Canada Terminal Equipment Technical 
Specifications. This is confirmed by the registration number. The abbreviation, IC, 
before the registration number signifies that registration was performed based on a 
Declaration of Conformity indicating that Industry Canada technical specifications were 
met. It does not imply that Industry Canada approved the equipment.
Cet appareil est conforme aux Spécifications...

xxiv
What Can I Do with This Machine?
The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN 
assigned to each terminal equipment provides an indication of the maximum number of 
terminals allowed to be connected to a telephone interface. The termination on an 
interface may consist of any combination of devices subject only to the requirement 
that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 
five.
Le Nombre d’équivalence Ringer (REN) de cet...

xxv
What Can I Do with This Machine?
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser 
product under the U.S. Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for Health and Safety Act of 
1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective 
housings and external covers, the laser beam cannot escape...

1-1
Before Using the Machine
Before Using the 
Machine
Machine Components
A Paper delivery tray
Outputs printouts.
B Paper delivery tray extension
Extension for the paper output tray.
C Cartridge cover
Open it when replacing the toner cartridge or 
removing jammed paper.
DNotch
Used to open the cartridge cover.
E Operation panel
Controls the machine.
F Document release lever
Releases jammed document.
G Document guides
Set to the width of documents.
H Automatic document feeder (ADF)
Feeds documents...

1-2
Before Using the Machine
N Scanning Platform
Scans document.
O Handset
For using the machine as a telephone or 
receiving faxes remotely.
P Handset cradle
Cradle for the handset.
Q USB port
Connect the USB cable.
R Handset jack
Connect the handset.
S External device jack
Connect an external device if necessary.
T Line jack
Connect the telephone cable.
U Handset cable retainer
Hook the handset cable to retain the slack.
V Power socket
Connect the power cord.
QO
PVU SRT 

1-3
Before Using the Machine
Operation Panel
A One-Touch Speed Dialing buttons
Enters recipients registered for one-touch 
speed dialing or group dialing.
BLCD
Displays messages and prompts during 
operation. Also displays selections, text, and 
numbers when specifying settings.
C Additional Mode button
Accesses additional fax modes.
D Menu button
Accesses the setting menu for customizing 
machine operations.
E Status button
Displays transaction results and prints 
reports and lists.
F Image Quality...