Canon printer FAXPHONE L120 User Manual

8-14
Maintenance
Working to preserve endangered species is a long-standing Canon interest. 
To this end, for every cartridge collected, Canon Canada donates $1, shared equally 
between World Wildlife Fund Canada and the Nature Conservancy of Canada. This 
donation is utilized in Canada.
●For further information about The Clean Earth Campaign in Canada, please call or 
write to Canon. 
1-800-667-2666
Canon Canada Inc.
Corporate Customer Relations
6390 Dixie Road
Mississauga, ON L5T 1P7 

8-15
Maintenance
Transporting the Machine
Follow this procedure to avoid 
vibration damage to the machine when 
transporting it over a long distance.
1Disconnect the power cord and 
all the cables from the back of 
the machine.
2Close the paper delivery tray 
extension (A), and then the 
paper delivery tray (B) itself.
CAUTION
Do not close the paper delivery tray without 
folding the extension first.
3Open the cartridge cover by the 
notch (A).
4Remove the cartridge.
NOTE
– Always hold the cartridge by...

8-16
Maintenance
6Push down the document feeder 
tray extension (A), then close the 
document feeder tray (B).
7Fold the document delivery tray 
extension (A), and then push the 
document delivery tray (B) into 
the machine.
CAUTION
Do not open or close the document 
delivery tray extension after the document 
delivery tray is pushed into the machine.
BA
AB 

9-1
Troubleshooting
Troubleshooting
Clearing Jams
NOTE
Do not force jammed document or paper out of the 
machine. Contact Canon Customer Care Center 
for assistance.
Document Jams
When a document jams in the machine, 
the LCD displays  and . A 
jammed document can be pulled out from 
the ADF or the document delivery slot.
1Lift the document release lever.
If a multi-page document is loaded, remove 
the entire document from the ADF.
2Lift the paper stack cover and 
pull it out completely.
NOTE
Make sure...

9-2
Troubleshooting
4Carefully pull out the jammed 
document.
5Lift the scanning platform back 
into place.
6Insert the paper stack cover.
NOTE
Make sure the back end of the cover does 
not catch and lower the scanning platform.
7Lower the document release 
lever back into place.
8Press [Stop/Reset] to return to 
standby mode. 

9-3
Troubleshooting
Paper Jams
When paper jams in the machine, the 
LCD displays  and . Try to remove 
jammed paper from inside the machine 
first, then from the paper feeder if 
necessary. Check the following if you 
experience repeated paper jams:
– Fan and tap the paper stack on a flat 
surface before loading it in the 
machine.
– Check that the paper you are using 
meets the requirements for use. (See 
“Print Media,” on p. 3-1.)
– Make sure you have removed any 
scraps of paper from inside the...

9-4
Troubleshooting
CAUTION
– Do not touch the fixing assembly (A) as 
it becomes very hot during use.
– Do not touch the pins (B) or the transfer 
roller (C) as this can damage the 
machine.
– If you tear the paper, remove any torn 
pieces to avoid further jams.
– If loose toner comes into contact with 
your skin or clothing, wash with cold 
water. Warm water will set the toner.
5Hold the cartridge by its handle.
The arrow (A) on the cartridge should be 
facing away from you and pointing down.
6Insert...

9-5
Troubleshooting
Paper Feeder
If you cannot reach the jammed paper 
from inside the machine, try removing it 
from the paper feeder.
1Lift the paper stack cover and 
pull it out completely.
`
NOTE
Make sure the back end of the cover does 
not catch the front paper guide.
2Carefully pull jammed paper 
from inside the slot.
NOTE
If you tear the paper, remove any torn 
pieces to avoid further jams.
3Insert the paper stack cover.
NOTE
Make sure the back end of the cover does 
not catch and lower the...

9-6
Troubleshooting
LCD Messages
See the table below when the LCD displays error messages.
MessageDescriptionAction
CARTRIDGE COVER OPEN
CLOSE CRG. COVERThe cartridge cover is open. Close the cartridge cover.
CHECK SCAN PLATFORMThe scanning platform is 
dirty, or not set into scanning 
position.Clean the scanning area, or 
lift the scanning platform into 
place.
Comm.ErrCommunication is 
disconnected. (only in the 
copy mode)Resend the fax or ask the 
other party to send their fax 
again.
Check with the...

9-7
Troubleshooting
FILE FULL/RX CANCELReception cannot be 
completed because all 
memory files are used.Wait for the machine to finish 
jobs in memory and try 
again.
FILE FULL/TX CANCELTransmission is canceled 
because all memory files are 
used.Wait for the machine to finish 
jobs in memory and try 
again.
HANG UP THE PHONEThe handset or an external 
telephone is off the hook.Hang up the handset or the 
telephone.
LINE PROBLEM
CHECK LINEThe telephone line is busy or 
there was no answer.Check if the...