Canon printer Color imageCLASS MF9280Cdn User Manual

Fax
5-50
Selecting Resolution

Selecting Resolution
You can specify the resolution before scanning the original. 
The default setting is .
The maximum size of an image that you can send at a resolution of 400 x 400 dpi is LGL.For details on how to send the documents, see “ Basic Methods for Sending Faxes,” on p. 5-17.––
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see “Specifying...

Fax
5-51
Adjusting Density

Adjusting Density
You can adjust the density to the most appropriate level for the original manually.
Manual Exposure Adjustment 
You can manually adjust the scan exposure to the most appropriate level for the original.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see...

Fax
5-52
Adjusting Density

Adjusting Base Color 
This mode enables you to erase the background color of the original when scanning. This mode is especially 
useful for scanning originals such as catalogs and paper, that have turned yellow from age.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.
1 
Press  (Main Menu). 
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see...

Fax
5-53
Adjusting Density
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
background setting, then press [OK].
: Does not erase the background color 
of the original.
: If you want to erase 
the background color of the original, 
following step is not necessary.
: If you want to 
make fine adjustments to the density of the 
background color, go to the next step.
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired color, then press [OK].
8 
Use [◀], [▶] or  (Scroll Wheel) to 
adjust the strength of...

Fax
5-54
Selecting Image Quality

Selecting Image Quality
You can manually select the original type according to the type of image that you are 
scanning. 
The default setting is .
Combinations of these three modes ( Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one of these modes, the previously set mode is canceled.If you scan an original containing halftones, such as a printed image, using the  mode, the moiré effect (a shimmering, wavy pattern) may occur. In this...

Fax
5-55
Selecting Image Quality
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the image quality, then press [OK].
: This mode is best suited for 
scanning originals containing both text and 
photos such as magazines or catalogs.
: This mode is best suited for scanning 
text originals. Blueprints or pencil drawn 
originals can also be scanned clearly.
: This mode is best suited for 
scanning photos printed on photographic 
paper or photo originals containing halftones 
(e.g. printed photos).
–
–
– 

Fax
5-56
2-Sided Original

2-Sided Original
You can set the machine to automatically turn over 2-sided originals that are placed in the 
feeder, and scan each side separately. 
The default setting is .
The 2-sided original mode cannot be used when sending a fax document in the direct sending or manual sending mode.When you are scanning originals with a horizontal (landscape) orientation, such as LTRR, make sure to place them horizontally into the feeder. If these originals are placed vertically, the...

Fax
5-57
2-Sided Original
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the type of original, then press [OK].
: 1-sided originals are scanned.
: The front and back 
sides of the original have the same top-
bottom orientation.
: The front and back 
sides of the original have opposite top-
bottom orientations.
–
–
– 

Fax
5-58
Sending Originals at a Preset Time (Delayed Sending)

Sending Originals at a Preset Time (Delayed 
Sending)
The delayed sending mode enables you to store a send job in memory, and have it sent at a 
later time. 
The default setting is .
You can reserve up to 70 jobs for the delayed sending. However, the actual number of jobs that can be reserved may be less than 70, depending on the following conditions:If multiple documents are being sent at the same time.If large documents are being sent.If...

Fax
5-59
Sending Originals at a Preset Time (Delayed Sending)

5 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then press 
[OK].
6 
Enter the send time using – 
(numeric keys), then press [OK].
Enter all four digits of the time (including 
zeros), using 24- hour notation.  
Examples: 
3:50 p.m.→1550
To cancel to enter the time, press the left Any 
key to select  to return to the 
previous screen.
If you set a time earlier than the current time, the document will be sent at that time on the next day.If...