Canon printer Color imageCLASS MF9280Cdn User Manual

Copying
4-14
Selecting Paper Source

7 
Use [▼], [▲] or  (Scroll Wheel) to 
specify the length of X, then press [OK].
You can adjust values for  between 3” 
(76 mm) and 8 1/2” (216 mm).
8 
Use [▼] or  (Scroll Wheel) to select the 
vertical length , then press [OK].
9 
Use [▼], [▲] or  (Scroll Wheel) to 
specify the length of Y, then press [OK].
You can adjust values for  between 5” 
(127 mm) and 14” (356 mm).
10
 Use [▼] or  (Scroll Wheel) to select 
, then press [OK].
11
 Use [▼], [▲] or  (Scroll...

Copying
4-15
Selecting Paper Source

Using Stack Bypass Tray with Envelopes
This section describes how to copy onto envelopes using the stack bypass tray.
If  setting in  from the Additional Functions screen is set to , the paper size/type setting screen appears when you load paper in the stack bypass tray. If  is set to , copying can be performed only for the registered paper size and type. (See “Setting Paper Size and Type,” on p. 2-22.)
1 
Set originals.
For details, see “ Placing Originals,” on p....

Copying
4-16
Selecting Paper Source
4 
Load envelopes into the stack bypass.
For details, see “In the Stack Bypass Tray,” on 
p. 2-1
6.
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired size of envelopes, then press 
[OK].
You can select from the following sizes of 
envelopes:
, , , , 
For details, see “ Paper Requirements,” on p. 2-7.
6 
Press [OK] to select .
The selected paper size is displayed next to 
.
7 
Press  (Start).
8 
Press  (Main Menu) to return to the 
Main Menu screen. 

Copying
4-17
Selecting Paper Source

Recalling Irregular Paper Size Registered for the Stack Bypass Tray
You can easily set the frequently used irregular paper size for the paper loaded in the stack 
bypass tray by recalling the pre-registered paper size. For details, see “Registering Irregular 
Paper Sizes for the Stack Bypass Tray,” on p. 2-26.
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4...

Copying
4-18
Selecting Paper Source

7 
Use [▼], [▲] or  (Scroll Wheel) to select 
 or , then press [OK].
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
Make sure that the recalled paper size is the 
same as the actual size of the paper you loaded 
in the stack bypass tray in step 4. If not, set the 
correct paper size. (See “Using Stack Bypass Tray 
with Irregular Sizes of Paper,” on p. 4-13.)
9 
Use [▼], [▲] or  (Scroll Wheel) to select 
the paper type, then press [OK].
You can...

Copying
4-19
Adjusting Density

Adjusting Density
You can manually adjust the copy exposure to the most appropriate level for the original. 
The copy tone becomes lighter as the indicator moves to the left, and darker as it moves to 
the right.  
The default setting is .
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK]. 

Copying
4-20
Adjusting Density
5 
Use [▼], [▲], [◀], [▶], or  (Scroll 
Wheel) to adjust the copy density, then 
press [OK].
To make dark originals lighter, move the 
density scale to the left.
To make light originals darker, move the 
density scale to the right.
6 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
7 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press  (Start) 
once for each page.
8 
Press  (Main Menu) to return to...

Copying
4-21
Adjusting Density

1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Press the right Any key to select 
.
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the background setting, then press [OK].
■ If you select :
① 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
② Press [OK], then skip to step 7.
Adjusting...

Copying
4-22
Adjusting Density

■ If you select :
① 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
② Use [▼], [▲] or  (Scroll Wheel) to select 
the desired color, then press [OK].
③ Use [▼], [▲], [◀], [▶] or  (Scroll Wheel) 
to adjust the strength of the color, then 
press [OK].
④ Press the right Any key to select , then 
press [OK].
7 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
8 
Press  (Start).
If you want to copy multiple originals using the 
platen glass,...

Copying
4-23
2-Sided Copying

2-Sided Copying
This mode enables you to make two-sided copies from one-sided or two-sided originals, or 
make one-sided copies from two-sided originals. This enables you to cut print costs in half 
when copying in large quantities.  
The default setting is .
When you use the feeder to make two-sided copies from two-sided originals or one-sided copies from two-sided originals, the original size must be LTR, LGL, FLSC, or A4.For the paper size that can be used for the...