Canon printer Color imageCLASS MF9280Cdn User Manual

Copying
4-44
Erasing Shadows/Lines

Erasing Shadows/Lines
This mode enables you to erase shadows and lines that appear when using various types of 
originals. The following three Frame Erase modes are available: Original Frame Erase, Book 
Frame Erase, and Binding Erase.  
The default setting is .
Combinations of the three Frame Erase modes cannot be set. If you select one of these modes, the previously set mode is canceled.Frame Erase modes cannot be used with the ID Card Copy mode.
–
– 

Copying
4-45
Erasing Shadows/Lines

1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
Original Frame Erase
This mode erases the dark borders and frame lines that appear around the copy if the original is smaller than 
the selected paper size. You can also use this mode...

Copying
4-46
Erasing Shadows/Lines

6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
To switch to the A/B Sizes, press the left Any key to select  .
■ If you want to set the same width for all four 
borders:
① 
Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK].
The default setting is . The maximum original frame erase width that you 
can set is .
To enter values in millimeters, press the left Any key to select . When entering the value...

Copying
4-47
Erasing Shadows/Lines
③ Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK]. 
The default setting is . The maximum original frame erase width that you 
can set is .
If you want to change the value, press  (Clear) before entering the new value.If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
–
–
–
④ Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
The display will return...

Copying
4-48
Erasing Shadows/Lines

Book Frame Erase
This mode erases the dark borders and the center and contour lines that appear when you copy facing pages 
in a book or bound original onto a single sheet of paper.
The Book Frame Erase mode cannot be used with the N on 1.You must place an original on the platen glass when using this function.––
1 
Set an original on the platen glass.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select...

Copying
4-49
Erasing Shadows/Lines

6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
To switch to the A/B Sizes, press the left Any key to select .
7 
Enter the each erase width value:
■ If you want to specify the erase width 
value for center:
① Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].  
To enter values in millimeters, press the left Any key to select .
 ② Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK].
The...

Copying
4-50
Erasing Shadows/Lines
② Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK].
The default setting is . The maximum original frame erase width that you can 
set is .
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
9 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
10
 Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press  (Start) 
once for each page.
11
 Press  (Main Menu)...

Copying
4-51
Erasing Shadows/Lines

1 
Set an original on the platen glass.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
Binding Erase
This mode erases the shadows that appear on copies from binding holes on originals.
Do not place originals with binding holes into the feeder, as...

Copying
4-52
Erasing Shadows/Lines

6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
To switch to the inch sizes, press the left Any key to select .
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
the hole punch location, then press [OK].
To enter values in millimeters, press the left Any key to select .
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
the frame erase width, then press [OK].
The default setting is . The maximum original frame erase width that you 
can set is...

Copying
4-53
Erasing Shadows/Lines
10
 Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press  (Start) 
once for each page.
11
 Press  (Main Menu) to return to the 
Main Menu screen.