Canon printer Color imageCLASS MF8350Cdn User Manual

6-27
Using the Fax Functions
Settings 
 (Boldface: Default settings) 
  Off    Does not use the Memory Lock mode. 
 On   Memory Lock PIN: 
 Seven-digit 
number 
 If you set a PIN, it will be necessary to enter the 
PIN whenever you want to change the Memory 
Lock mode settings, or cancel the Memory Lock 
mode. 
 Print  Report: 
 Off  , On   You can specify whether or not to print the 
receive results when receiving a fax. 
 You need to set also "Receive Results" to . 
 Memory  Lock  Time:  
 Do...

6-28
Using the Fax Functions 

Chapter
 7
7-1
 The documents scanned by the machine can be stored in a computer or a USB memory. 
* If you are a Macintosh user, see the Scanner Driver Guide.
Basic Operation Methods for Scanning  7-2
Scanning Documents and Saving Them in a Computer (USB & 
Network Connection)  7-2
Saving Scanned Documents in a USB Memory  7-3
   Using the  Scan Functions   

7-2
Using the Scan Functions
Scanning Documents and Saving Them in a 
Computer (USB & Network Connection)
You can scan a document using the keys on the operation 
panel.
    NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - -  
To scan documents by operating a computer
  See "Scan" in the e-Manual.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -
OKSCAN
Keys to be used for this operation
1  Place documents on the platen...

7-3
Using the Scan Functions
O?  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - - - - - -
If you cannot scan
  You cannot scan when the setting screen of the MF Toolbox is displayed.
 Click [ 
 ] to close the setting screen before scanning.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -
The location to save the scanned images
The folder where the images are saved opens automatically 
after scanning.
By default, the folder for the...

7-4
Using the Scan Functions
5  Specify the scan settings depending on the types of documents or use.
The following settings can be changed.
For details on each item, see "Scan" in the e-Manual.
Scanning size
Density
Original orientation
Original type
Sharpness
Data Size (Color Only)
The settings specifi ed here are eff  ective only for the current 
operation.
To make the settings eff  ective for all the transmitting operations to 
a USB memory, see "Scan" in the e-Manual.
6 Press []...

Chapter
 8
8-1
 This section describes the maintenance of this machine, replacement of the toner cartridges, and so 
on.  
Cleaning the Machine  8-2
Cleaning the Exterior  8-2
Cleaning the Fixing Unit  8-2
Cleaning the ITB  8-3
Cleaning the Platen Glass  8-3
Cleaning the Feeder Automatically  8-4
Replacing Toner Cartridges   8-5
About the Supplied Toner Cartridge  8-5
About Replacement Toner Cartridges  8-5
Handling Toner Cartridges  8-6
Checking the Toner Level  8-6
When a Message Appears  8-7...

8-2
Maintenance
  Cleaning  the  Machine  
 Before cleaning the machine, check the following.  Make sure that no jobs are stored in memory, then turn OFF 
the main power switch and disconnect the power cord. 
 Use a soft cloth to avoid scratching the machine. 
 Do not use tissue paper, paper towels, or similar materials 
for cleaning. They can stick to the components or generate 
static charges. 
 
    CAUTION  
 Never use volatile liquids such as thinner, benzene, acetone, or any 
other chemical...

8-3
Maintenance
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - -  
 If cleaning does not start 
   When there are jobs stored in the memory, this function is not available. 
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -  
  5   Press [] (Menu) to close the menu screen. 
  
 Cleaning  the   ITB 
 If dirt sticks to the transfer belt and results in a deterioration in 
print quality, clean the transfer belt inside the...

8-4
Maintenance
 Cleaning  the   Feeder  Automatically 
 If copies have streaks or if the original documents are dirtied 
after using the feeder, this may be caused by pencil lead 
rubbing off   the documents and onto the roller. Clean the roller 
using blank paper. 
 
OK
Men
u
Keys to be used for this operation
 
  1     Press [] (Menu). 
  2     Press [] or [] to select , and then press [OK]. 
 
Menu Send/Receive Settin...
Printer Settings
Timer Settings
Adjustment/Cleaning
 
  3     Press [] or [] to...