Canon Powershot Elph 330 Hs User Guide

							111
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Registering a Camera Nickname (First 
time only)
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when 
connecting to other devices via Wi-Fi.
1 Access the Wi-Fi menu.
zzPress the  button to turn the camera 
on.
zzPress the  button.
2 Access the keyboard.
zzPress the  button.
3 Enter a nickname.
zzPress the  buttons to 
choose a character, and then press the 
 button to enter it.
zzUp to 16 characters can be used.
zzChoose [] or [] and press the  
button to move the cursor.
zzChoose [] and press the  button. 
The previous character will be deleted.
4 Save the settings.
zzPress the  button, press the 
 buttons to choose [OK], and 
then press the  button.
•	 When connecting wirelessly to any device other than a computer, a memory 
card must be inserted in the camera. Additionally, the memory card must 
contain images in order for you to access Web services or connect to a 
smartphone or printer wirelessly.
•	 To change the camera’s nickname, choose [Wi-Fi Settings] on the [3] tab, and 
then choose [Change Device Nickname].
•	 If the Wi-Fi menu is not displayed but only the information changes when\
 
you press the  button, first press the  button to switch from detailed 
information display ( =
  85).
 
COPY  
						

							11 2
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Connecting to Web Ser vices
Set up the camera to use a variety of Web services as follows.
Adjusting Settings for Using Web Ser vices 
From CANON iMAGE GATEWAY
Adjust account settings for the Web services you want to use.
•	 A computer is required for Web service settings, starting with CANON 
iMAGE GATEWAY.
•	 Because CameraWindow is used to adjust settings, be sure to install 
it from the included CD-ROM beforehand ( =
  20). See “System 
Requirements” ( =  20) for server transfer system requirements.
•	 For information on countries and regions where CANON iMAGE 
GATEWAY is available, visit the Canon website (http://canon.com/cig).
1 Register as a CANON iMAGE 
GATEWAY member.
zzFrom a computer or other device 
connected to the Internet, access http://
canon.com/cig and visit the CANON 
iMAGE GATEWAY site for your region.
zzFollow the instructions displayed to 
complete member registration (free of 
charge).
zzYou must have an account with Web 
services other than CANON iMAGE 
GATEWAY if you desire to use them. For 
further details, check the websites for 
each Web service you want to register.
2 Connect the camera to a 
computer with the interface 
cable (=
  21).
zzOn a computer running Windows, there 
is no need to connect the interface cable 
if you complete settings in advance 
(=
  120). In this case, you can connect 
via Wi-Fi.
3 Display CameraWindow 
(=  22).
4 Access the CANON iMAGE 
GATEWAY login screen.
zzClick [Camera Settings], and then click 
[Set Up Web Services].
5 Login to CANON iMAGE 
GATEWAY.
zzEnter your CANON iMAGE GATEWAY 
login name and password, and then click 
[Login].
 
COPY  
						

							11 3
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
6 Set a Web service you want to 
use.
zzFollow the on-screen instructions to 
complete settings for Web services you 
want to use.
zzOnce the Web service settings are 
complete, click [Finish] at the bottom of 
the window to close it.
7 Apply Web service settings to 
the camera.
zzChoose the name of the Web service you 
want to set on the camera, and click [] 
in the middle of the lists.
XXThe name of the Web service that will be 
saved to the camera will be displayed in 
the [Camera] list.
zzClick [o] or [p] to change the order of 
the Web services that will be displayed in 
the camera’s Wi-Fi menu.
zzAfter you finish adjusting settings in the 
[Camera] list to your liking, close the 
window.
XXThe settings of Web services and for 
transferring images via the server are 
applied to the camera.
•	 An Internet connection is required to access CANON iMAGE 
GATEWAY (an Internet browser must be installed on the computer, 
you must have an account with an Internet service provider, and an 
Internet connection must be established).
•	 When connecting to CANON iMAGE GATEWAY, check the CANON 
iMAGE GATEWAY website for browser (Microsoft Internet Explorer, 
etc.) settings, conditions, and version information.
•	 Separate ISP connection and access point fees may be applicable.
•	 After logging in to CANON iMAGE GATEWAY the second time in step 5, the 
screen in step 7 will be displayed. To change settings for Web services you 
use, click [Edit Web Services].
•	 To add or change Web services, repeat the above procedures starting from 
step 2.
 
COPY  
						

							11 4
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Establishing Web Ser vice Connections
Connect to Web services registered to the camera.
1 Access the Wi-Fi menu.
zzPress the  button.
2 Choose a Web service.
zzPress the  buttons to 
choose the icon of the Web service that 
you want to connect to, and then press 
the  button.
zzIf the Web service has multiple recipients, 
select the desired recipient on the [Select 
Recipient] screen, and press the < m> 
button.
3 Connect to an access point.
zzWith a WPS-compatible access point, 
connect to the access point by following 
steps 4 – 6 in “Adding a Computer” 
(=
  121).
zzWith an access point that is not WPS-
compatible, connect to the access point 
by following steps 2 – 3 in “Connecting to 
Access Points in the List” (=
  122).
XXWhen you have connected to the Web 
service, the image transfer screen will be 
displayed. Proceed to “Sending Images” 
(=
  126).   
However, when [Send via Server] is 
selected, images will be sent as soon as 
a connection is established ( =
  128).
•	When you are in the vicinity of an access point that you have 
previously connected to, the camera will automatically connect 
to it in step 2. To change access points, select [Switch Network] 
from the screen that will be displayed when the connection is 
being established, and follow steps 4 – 5 in “Adding a Computer”\
 
(=
  121).
•	 After you have accessed the Wi-Fi menu once, you can access it again by \
pressing the < o> button. The recent target device is listed first, so you can 
easily connect again by pressing the < o> buttons to choose it. To add 
a new device, display the device selection screen by pressing the < q> 
buttons, and then configure the setting.   
If you prefer not to display recent target devices, press the < n> button, 
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
 
COPY  
						

							11 5
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Connecting to a Smar tphone
When establishing a Wi-Fi connection with a smartphone, you can either 
use the camera as an access point (Camera Access Point mode) or use 
another access point.
Follow these instructions when using the camera as an access point. When\
 
using another access point, see “Connecting to Access Points in the List” 
(=
  122).
Installing CameraWindow on a Smar tphone
Before connecting your camera to a smartphone, first install the free 
dedicated application, CameraWindow, on your smartphone.
1 Connect the smartphone to a 
network.
2 Install CameraWindow.
zzFor an iPhone, iPad, or iPod touch, 
download and install CameraWindow 
from the Mac App Store.
zzFor an Android device, download and 
install CameraWindow from Google Play.
3 Register the smartphone name.
zzOn the smartphone, start CameraWindow 
and enter a name for the smartphone that 
will be displayed on the camera.
•	 For details on this application (supported smartphones and included functions), 
refer to the Canon website.
Establishing the Smartphone Connection
1 Access the Wi-Fi menu.
zzPress the  button.
2 Choose a smartphone.
zzPress the  buttons to 
choose [], and then press the  
button.
3 Choose [Add a Device].
zzPress the  buttons to choose 
[Add a Device], and then press the < m> 
button.
XXThe camera’s SSID and encryption key 
are displayed on the screen.
 
COPY  
						

							11 6
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
4 Use the smartphone to connect 
to the network displayed on the 
camera screen.
zzChoose the displayed SSID (network 
name) from the smartphone’s Wi-Fi 
setting menu.
zzEnter the encryption key displayed on the 
camera screen into the password field on 
the smartphone.
5 Start CameraWindow on the 
smartphone.
XXOnce the smartphone is recognized on 
the camera, the device connection screen 
will be displayed on the camera.
6 Choose a smartphone to 
connect to.
zzPress the  buttons to choose 
the smartphone for the connection, and 
then press the  button (=
  115).
7 Adjust the privacy settings.
zzPress the  buttons to choose 
[Yes], and then press the  button.
XXYou can now use the smartphone to 
receive images sent from the camera, 
or to geotag images on the camera 
(=
  129).
XXWhen the smartphone has been added 
successfully, the image transfer screen 
will be displayed. Proceed to “Sending 
Images” (=
  126).
•	 When you are in the vicinity of an access point that you have 
previously connected to, the camera will automatically connect 
to it in step 3. To change access points, select [Switch Network] 
from the screen that will be displayed when the connection is 
being established, and follow steps 4 – 5 in “Adding a Computer”\
 
(=
  121).
•	 All camera images can be viewed from the connected smartphone 
when you choose [Yes] in step 7. To keep camera images private, 
so that they cannot be viewed from the smartphone, choose [No] in 
step 7.
 
COPY  
						

							11 7
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
•	 You can connect to smartphones that you have already connected to by 
choosing them on the [Select a Device] screen in step 3.
•	 After you have accessed the Wi-Fi menu once, you can access it again by \
pressing the < o> button. The recent target device is listed first, so you can 
easily connect again by pressing the < o> buttons to choose it. To add 
a new device, display the device selection screen by pressing the < q> 
buttons, and then configure the setting.   
If you prefer not to display recent target devices, press the < n> button, 
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
•	 The image quality level for movies that can be sent may differ depending 
on the smartphone. Refer to the instruction manual provided with your 
smartphone for details.
•	 To add multiple smartphones, repeat the above procedures starting from st\
ep 
1.
•	 To change privacy settings for smartphones added to the list, choose the \
smartphone whose settings you want to change from [Edit a Device] in ste\
p 3, 
and then choose [View Settings].Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•	Only Canon-brand cameras equipped with a Wi-Fi function can be connected\
 
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot 
be connected to if they do not have a Wi-Fi function. You cannot connect to 
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS 
cameras with this camera.
1 Access the Wi-Fi menu.
zzPress the  button.
2 Choose a camera.
zzPress the  buttons to 
choose [4], and then press the  
button.
3 Choose [Add a Device].
zzPress the  buttons to choose 
[Add a Device], and then press the < m> 
button.
zzFollow steps 1 – 3 on the target camera.
XXCamera connection information will be 
added when [Start connection on target 
camera] is displayed on both camera 
screens.
XXWhen the target camera has been added 
successfully, the image transfer screen 
will be displayed. Proceed to “Sending 
Images” (=
  126).
 
COPY  
						

							11 8
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
•	 After you have accessed the Wi-Fi menu once, you can access it again by \
pressing the < o> button. The recent target device is listed first, so you can 
easily connect again by pressing the < o> buttons to choose it. To add 
a new device, display the device selection screen by pressing the < q> 
buttons, and then configure the setting.   
If you prefer not to display recent target devices, press the < n> button, 
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
•	 To add multiple cameras, repeat the above procedures starting from step 1\
.
•	 Once a camera is added, the camera nickname will be displayed on the screen 
in step 3. To connect to a camera again, simply choose the camera nickname 
from the list.Connecting to a Computer
Configure computer settings for the connection, add the computer as a 
connection destination, and transfer images to the computer wirelessly 
using the included software CameraWindow as follows.
•	When connected to a computer, the camera is used to establish the 
connection and then the computer (included software CameraWindow) is u\
sed 
to transfer images.
Preparing to Register a Computer
Prepare to register a computer.
Checking Your Computer Environment
For computer environments that allow Wi-Fi connection with a camera, ref\
er 
to “System Requirements” ( =  20).
Additionally, the included software CameraWindow must be installed 
(=
  20).
•	 Windows 7 Starter and Home Basic editions are not supported.
•	 Windows 7 N (European version) and KN (South Korean version) 
require a separate download and installation of Windows Media 
Feature Pack.
For further details, see the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
 
COPY  
						

							11 9
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Checking Your Wi-Fi Environment
To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access 
point must be connected to a computer. Be sure to use a Wi-Fi base unit 
that conforms to the Wi-Fi standard listed in “Specifications” ( =
  171).
If you are already using Wi-Fi, confirm the following items and mark each 
one on the Check sheet. For instructions on checking network settings, 
refer to the access point user guide.
•	 If system administrator status is needed to adjust network settings, 
contact the system administrator for details.
•	 These settings are very important for network security. Exercise 
adequate caution when changing these settings.
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Network
	certificate/data	encryption	(encryption	method/
encryption mode)
The method for encrypting data during transmission via 
Wi-Fi.
ONoneOWEP (open system 
authentication)
OWPA-PSK (TKIP)OWPA-PSK (AES)OWPA2-PSK (TKIP)OWPA2-PSK (AES)
Encryption key (network key)
The data encryption key used for transmission via Wi-Fi.
Key index (sent key)
The key specified when using WEP for Network certificate/
data encryption. O 1
•	
A router is a device that creates a network (LAN) structure for connect\
ing 
multiple computers. A router that contains an internal Wi-Fi function is called a 
“Wi-Fi router”.
•	 This guide refers to all Wi-Fi routers and base stations as “access p\
oints”.
•	 If you use MAC address filtering on your Wi-Fi network, be sure to add the 
camera’s MAC address to your access point. You can check your camera’s 
MAC address by choosing the [ 3] tab, [Wi-Fi Settings], and then [Check MAC 
Address].
 
COPY  
						

							120
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Computer Settings for Connecting via Wi-Fi (Windows 
only)
On a computer running Windows, you must configure the following settings 
before you can connect the camera to the computer wirelessly.
1 Confirm	the	computer	is	connected to Wi-Fi.
zzFor instructions on checking your network 
connection, refer to the computer user 
manual.
2	 Configure	the	setting.
zzClick in the following order: [Start] menu 
► [All Programs] ► [Canon Utilities] ► 
[CameraWindow] ► [Wi-Fi connection 
setup].
zzIn the application that opens, follow the 
on-screen instructions and configure the 
setting.
•	 The following Windows settings are configured when you run the utility in step 
2.
-
 Turn on media streaming. 
This will enable the camera to find the computer to access via Wi-Fi.
-
 Turn on network discovery. 
This will enable the computer to find the camera.
-
 Turn on ICMP (Internet Control Message Protocol). 
This allows you to check the network connection status.
-
 Enable Universal Plug & Play (UPnP). 
This will enable network devices to detect each other automatically.
•	 Some security software may prevent you from completing the settings as 
described here. Check the settings of your security software.
Adding a Computer
Add a computer to your list of devices to connect to via Wi-Fi.
Follow these instructions when using a Wi-Fi Protected Setup (WPS) 
compatible access point to establish a push-button connection.
If your access point is not WPS-compatible, establish a connection as 
described in “Connecting to Access Points in the List” (=
  122).
•	WPS makes it easy to complete settings when connecting devices over Wi-F\
i. 
You can use either Push Button Configuration Method or PIN Method for 
settings on a WPS supported device.
•	 Refer to the user guide provided with your access point to check if it s\
upports 
WPS.
•	 Be sure to also read the user guide included with your access point.
1 Access the Wi-Fi menu.
zzPress the  button.
2 Choose a computer.
zzPress the  buttons to 
choose [], and then press the  
button.
3 Choose [Add a Device].
zzPress the  buttons to choose 
[Add a Device], and then press the < m> 
button.
XXA list of detected access points will be 
displayed in the [Select Network] screen.
 
COPY