Canon Pixma Mx922 User Guide

2.Rescan
If you press the left  Function button, the original is rescanned.
Press the  OK button to start scanning.•
After scanning:
Placing documents (platen)  screen appears on the LCD after scanning each sheet of original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass, then press the  OK button.
Note
If you do not need more scanning, press the left  Function button. The machine starts
copying.
You can add the copying job while printing....

About Other Copy FunctionsThe following copying functions are selectable.
Borderless copy
 You can copy images so that they fill the entire page without borders.
Copying without BordersFrame erase copy 
When copying thick originals such as books, you can make a copy without black margins
around the image and gutter shadows.
Copying Thick Originals Such as BooksPhoto copy You can copy all photos you scanned.
Copying Photos
 

Copying Two Pages to Fit onto a Single PageWhen you select  2-on-1 copy for Layout  in Standard copy , you can copy two original pages onto a
single sheet of paper by reducing each image.
Press the right  Function button on the Copy standby screen to display the print settings screen, then
select  2-on-1 copy  for Layout .
Press the right  Function button to specify the orientation and the advanced layout.
•
When you select  Portrait for Orientation  and Left to right  for 2-on-1 copy layout :
•
When you...

When Loading the Original on the platen glass:•
Before scanning:
When the preview function is activated, the machine starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below (preview screen) is displayed on the
LCD.
1.
Rotate
If you press the right  Function button, the original rotates by 180 degrees.
2.
Rescan
If you press the left  Function button, the original is rescanned.
Press the  OK button to start scanning.
•
After scanning:
Placing documents (platen)...

Copying Four Pages to Fit onto a Single PageWhen you select  4-on-1 copy for Layout  in Standard copy , you can copy four original pages onto a
single sheet of paper by reducing each image. Four different layouts are available.
Press the right  Function button on the Copy standby screen to display the print settings screen, then
select  4-on-1 copy  for Layout .
Press the right  Function button to specify the orientation and the advanced layout.
Note
The layout is the same regardless of the orientation....

After selecting the layout and press the OK button, you can select whether you use the preview
screen. If you select  ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is full. Cannot continue process.  appears on the LCD when scanning, set
the print quality to  Standard, then try copying again. If the problem is not resolved, set the print
quality to  Fast and try copying again.
This function can be used in combination with Two-sided copy.
If you use this...

Remove the sheet of original from the platen glass after scanning and load the next sheet on theplaten glass, then press the  OK button.
Note
If you do not need more scanning, press the left  Function button. The machine starts
copying.
You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
 

Copying Thick Originals Such as BooksWhen copying thick originals such as books, you can make a copy without black margins around theimage and gutter shadows. Using this function, you can reduce unnecessary ink consumption.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Load paper.
Loading Paper
3.
Press the  MENU button.
The menu screen is displayed.
4.
Select   Advanced print , then press the OK button.
5.
Select  Frame erase copy , then press the OK button.
6.
Load the...

machine cannot distinguish the document color from the shadow and this may cause slight
cropping or a shadow on the crease. 

Copying without BordersYou can copy images so that they fill the entire page without borders.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Load the photo paper.
Loading Paper
3.
Press the  MENU button.
The menu screen is displayed.
4.
Select   Photo , then press the  OK button.
5.
Select  Borderless copy , then press the OK button.
6.
Load the original on the platen glass.
Loading Originals
Note
When you use this function, load the original on the platen glass.
7....