Canon Pixma Mx922 User Guide

Printing begins.
Note
When you use a USB cable for printing, select Canon XXX Printer from Select Printer.
To cancel a print job in progress, use the  Stop button on the printer or click  Cancel Printing on
the printer status monitor. After printing is canceled, a sheet of paper may be ejected with no
printing results.
To display the printer status monitor, click Canon XXX Printer (Copy X) on the taskbar.
X is a device name or a digit. The number of digits may differ depending on the printer.
 

Printing with Bluetooth Compliant Devices other than a
Computer
The LCD of the printer allows you to perform settings for printing using Bluetooth compliant devices other than a computer.
When you print with one of these devices, also refer to your devices instruction manual.
When printing from a computer, see  Printing with Computers.
Note
Mobile phones, PDAs and digital cameras supporting OPP (Object Push Profile) or BIP (Basic
Imaging Profile) can print photos. Depending on your device, you may not...

Bluetooth Settings
 Setting Bluetooth Printing
 Bluetooth settings Screen
 

Setting Bluetooth Printing
1.
Make sure that the printer is turned on.
Confirming that the Power Is On
2.
Attach the Bluetooth unit.For information about how to attach the Bluetooth unit, see  Attaching to and Removing from the
Printer .
Note
When the Bluetooth unit is properly attached to the printer, the message is displayed on the
LCD.
3.
Display the  Bluetooth settings  (Graphic LCD)/Bluetooth settings  (Text LCD)
screen on the LCD.
For information about how to display the  Bluetooth settings...

Bluetooth settings Screen
•
Graphic LCD
•
Text LCD
1.
Select device name (Graphic LCD)/Device name (Text LCD)
Displays the device name of the printer to which the Bluetooth unit is attached.
Select device name  (Graphic LCD)/Device name (Text LCD) Screen
2.
Access refusal setting  (Graphic LCD)/Access refusal  (Text LCD)
Selecting  ON (Graphic LCD)/ ON (Text LCD) will disable searching of this printer by a Bluetooth-
compatible device.
Access refusal setting  (Graphic LCD)/Access refusal  (Text LCD)...

In the example used for this explanation, the model name is set to MX520 series.
When a model other than MX520 series is used, whatever appears in place of MX520 becomes the model name use.
Ex:
When you select  MX520 series-2, the printer name displayed on the Bluetooth device is  Canon MX520
series-2 .
The initial value is set to  MX520 series-1.•
Graphic LCD
•
Text LCD
Access refusal setting (Graphic LCD)/Access refusal (Text LCD) Screen
When you search from a Bluetooth device, you can enable or...

Change passkey (Graphic LCD)/Passkey (Text LCD) Screen
When you select  Enable (Graphic LCD)/ Enable (Text LCD) on the  Security settings (Graphic LCD)/
Security settings  (Text LCD) screen, you are required to set a passkey to register the printer on other
Bluetooth devices.
After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey.•
Graphic LCD
•
Text LCD
 

Specifications
Communication
methodBluetooth v2.0Maximum Speed1.44 MbpsOutputBluetooth Power Class 2
Communication
distance
Line-of-sight distance: approx. 33 ft./10 m * * It may vary depending on factors including the presence of obstacles between communication equipment, radio wave conditions, the presence of magnetic fields
around microwave ovens and locations where electrostatic and radio interference
occur, the types of software and operating systems used, and receiver sensitivity
and antenna...

Copying
 Making Copies  Basic
 Displaying the Preview Screen
  Setting Items
 Reducing or Enlarging a Copy
 Two-Sided Copying
 About Other Copy Functions
 Copying Two Pages to Fit onto a Single Page
 Copying Four Pages to Fit onto a Single Page
 Copying Thick Originals Such as Books
 Copying without Borders
 Collated Copying
 Copying Photos
 

Making CopiesLoad the original to copy.
This section describes the procedure to copy with  Standard copy.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the COPY button.
The Copy standby screen is displayed.
3.
Load paper.
Loading Paper
4.
Load the original document on the platen glass or in the ADF.
Loading Originals
5.
Specify the settings as necessary.
1.
Number of copies
Specify by using the  + or  - button.
2.
Print settings
By pressing the right  Function...