Canon Pixma Mx922 User Guide

If you load the original in the ADF, do not move the original until copying is complete.
Note
To cancel copying, press the Stop button.
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass...

Displaying the Preview ScreenWhen you load the original on the platen glass and select  Standard copy or Frame erase copy  in
Advanced print , pressing a Function button allows you to preview an image of the printout on the
preview screen.
When  Standard copy  is selected, press the left  Function button on the Copy standby screen.
When  Frame erase copy  is selected, press the right  Function button on the print settings screen.
Important
The preview screen is not available when you load the original in...

Setting ItemsYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
For details on the print setting screen or the setting item for  Photo copy, see Copying Photos .
How to display the print setting screen varies with the copy menu.
•
In  Standard copy :
The following screen is displayed by pressing the right  Function button on the Copy standby
screen.
•
In  Borderless copy  or Frame erase copy :
The following screen is displayed before copying.
Setting Items...

Note
Depending on the copy menu, some setting items cannot be selected. This section describes
the setting items in  Standard copy.
The setting item which cannot be selected is displayed grayed out.
For details on the setting items for  Photo copy, see Copying Photos .
Some settings cannot be specified in combination with the setting of other setting item or the
copy menu. If the setting which cannot be specified in combination is selected,  Error details is
displayed on the LCD. In this case, press the...

3.Page size
Select the page size of the loaded paper.
4.
Type (Media type)
Select the media type of the loaded paper.
5.
Print qlty  (Print quality)
Adjust print quality according to the original.
Important
If you use  Fast with  Type set to  Plain paper  and the quality is not as good as expected,
select  Standard  or High  for Print qlty  and try copying again.
Select High for Print qlty  to copy in grayscale. Grayscale renders tones in a range of
grays instead of black or white.
6.
Layout
Select the...

Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you press the right  Function button in the Copy standby screen.
Select the reduction/enlargement method from  Magnif..
Note
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in  Magnif.: Fit to page...

If you select other than Fit to page and press the right  Function button, Magnification  screen is
displayed. Use the 
 button to specify the magnification.
Note
400% MAX  (maximum copy ratio) and  25% MIN (minimum copy ratio) are selectable.
If you make a copy at the same size as the original, select  Same size.
 

Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Standard copy , you can copy two original
pages onto the both sides of a single sheet of paper.
In addition, when you select  Duplex for ADF duplex scan , you can perform duplex scanning.
Specify the place to load originals or copy settings according to the two-sided copying method.
•
Single-sided to Two-sided
Place to load the original: platen glass or ADF ADF duplex scan : Simplex
2-sidedPrintSetting : 2-sided
Note
When you select...

•
Two-sided to Single-sided
Place to load the original: ADF
ADF duplex scan : Duplex
2-sidedPrintSetting : 1-sided
Note
When you select  Duplex for ADF duplex scan , Advanced  is displayed on the LCD. You
can select the orientation and the stapling side of the original by pressing the right  Function
button.
•
When you select  Portrait for Orientation  and Long-side stapling  for Stapling side of
print paper :
•
When you select  Portrait for Orientation  and Short-side stapling  for Stapling side of...

•
When you select Portrait for the orientation and  Short-side stapling for the stapling side:
•
When you select Landscp. for the orientation and  Long-side stapling for the stapling side:
•
When you select Landscp. for the orientation and  Short-side stapling for the stapling side:
After selecting the stapling side and press the  OK button, you can select whether you use the preview
screen. If you select  ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is...