Canon Pixma Mx532 User Guide

Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
In the copy mode, press the  Menu button, use the 
 button to select  Enlarge/Reduce , then press the
OK  button.
Use the 
 button to select the reduction/enlargement method, then press the  OK button.
Ex:
Note
•
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Preset ratio
You can select one of the preset ratios to reduce or enlarge...

Two-Sided CopyingYou can copy two original pages or a two-sided page onto the both sides of a single sheet of paper.
Note
•
When  ON is selected for  Copy on ECO (2-sided) , Two-sided copying is set as a default.
About ECO settings
•
When the original is vertical orientation and select  Long side for Stapling side :
•
When the original is vertical orientation and select  Short side for Stapling side :
•
When the original is horizontal orientation and select  Long side for Stapling side :
•
When the...

If a page size setting or a media type setting that cannot be used in two-sided copying is selected, the
LCD displays the following message.1.
Use the  button to select the page size, then press the  OK button.
2.
Use the  button to select the media type, then press the  OK button.
Note
•
When  ON is selected for  Copy on ECO (2-sided)  and a page size setting or a media type setting
that cannot be used in two-sided copying is selected, pressing the  COPY button displays the
message above on the LCD.
7....

The machine starts scanning the next sheet of document automatically after one sheet ofdocument finishes being scanned.
Note
•
If  Memory is full  appears on the LCD when scanning, set the image quality to  Standard or reduce the
number of sheets of documents, then try copying again. If the problem is not resolved, set the image quality to  Draft and try copying again.
•
If you are copying in black & white, print intensity of two-sided copying may differ from that of a single-
sided copy.
•
If you press...

About Special copy MenuThe following menus are selectable in the  Special copy menu.•
2-sided copy
You can copy two original pages onto the both sides of a single sheet of paper.
Two-Sided Copying
•
Frame erase copy
When copying thick originals such as books, you can make a copy without black margins around the
image and gutter shadows.
Copying Thick Originals Such as Books
•
Borderless copy
You can copy images so that they fill the entire page without borders.
Copying without Borders
•
2-on-1 copy
You...

Copying Two Pages to Fit onto a Single PageYou can copy two original pages or a two sided page onto a single sheet of paper by reducing each image.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Press the  COPY button.
The Copy standby screen is displayed.
4.
Press the  Menu button.
The  Copy menu  screen is displayed.
5.
Use the  button to select  Special copy, then press the  OK button.
6.
Use the  button to select  2-on-1 copy, then press the  OK button.
If a page size setting or a media...

If you have the next page to scan, load it on the platen glass and press the OK button. The
machine starts copying.
If you do not need more scanning, press the tone button to start copying. The machine starts
copying.
Note
•
You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
•
When the document has been loaded in the ADF:
The machine starts scanning the next sheet of document automatically after one sheet of
document finishes being scanned.
Note
•
If  Memory is full...

Copying Four Pages to Fit onto a Single PageYou can copy four original pages onto a single sheet of paper by reducing each image. Four differentlayouts are available.•
When  Layout 1  is selected for  4-on-1 layout:
•
When Layout 2  is selected for  4-on-1 layout:
•
When Layout 3  is selected for  4-on-1 layout:
•
When Layout 4  is selected for  4-on-1 layout:
1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Press the COPY button.
The Copy standby screen is displayed.
4.
Press the  Menu...

If a page size setting or a media type setting that cannot be used in 4-on-1 copying is selected, the LCDdisplays the following message.1.
Use the  button to select the page size, then press the  OK button.
2.
Use the  button to select the media type, then press the  OK button.
7.
Specify the print settings and the layout.
Press the  Menu button, then use the 
 button to select a setting item.
Select  4-on-1 layout , press the OK button, then select the layout.
Setting Items for Copying
Note
•
The *...

Copying Thick Originals Such as BooksWhen copying thick originals such as books, you can make a copy without black margins around the imageand gutter shadows. Using this function, you can reduce unnecessary ink consumption.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Press the  COPY button.
The Copy standby screen is displayed.
4.
Press the  Menu button.
The  Copy menu  screen is displayed.
5.
Use the  button to select  Special copy, then press the  OK button.
6.
Use the  button to...