Canon Pixma Mx532 User Guide

Printing from Mobile Phone via Bluetooth CommunicationThis section describes the procedure to print photos through Bluetooth communication from a mobile phone
with the optional Bluetooth Unit BU-30.
When printing from a mobile phone through Bluetooth communication, refer also to your mobile phone's
instruction manual.
For the procedure to print through Bluetooth communication from the computer, refer to 
About Bluetooth
Communication .
Note
•
Mobile phones supporting OPP (Object Push Profile) or BIP...

-Receiver sensitivity and antenna performance of the communication equipment.•
Video files cannot be printed.
•
Depending on your mobile phone, data saved on a memory card may not be printed.
•
About transmittable data
•
Due to security settings on the mobile phone, downloaded content or photos downloaded froma URL attached to an E-mail cannot be printed.
•
Depending on the size of a photo, it may take a while for this machine to start printing after
starting wireless communication.
•
Printed quality and...

About Bluetooth Communication
Handling Precautions
Preparation to Use the Bluetooth Unit
Printing Data via Bluetooth Communication
Basic Procedure for Printing via Bluetooth Communication
Bluetooth Settings
Specifications
153
 

Handling Precautions
Shipping the Bluetooth Unit
154
 

Shipping the Bluetooth UnitThe Bluetooth unit may not be used in countries or regions other than the country or region where it was
purchased due to local laws and regulations. Please note that the use of the Bluetooth unit in such countries
or regions may lead to penalties and that Canon should not be liable for such punishment.155
 

Preparation to Use the Bluetooth Unit
Bluetooth Unit
Attaching to and Removing from the Printer
156
 

Bluetooth UnitThe Bluetooth Unit BU-30 (hereafter referred to as the Bluetooth unit) is an adaptor which can be used with
a Canon IJ printer with Bluetooth interface.
By attaching the Bluetooth unit to a Canon IJ printer with Bluetooth interface, wireless printing from a
Bluetooth enabled device, such as a computer or mobile phone, is possible.
Note
•
Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions below.
Printing speed may vary depending on the following...

Attaching to and Removing from the Printer
Attaching the Bluetooth Unit to the Printer
Removing the Bluetooth Unit from the PrinterAttaching the Bluetooth Unit to the Printer
Attach the Bluetooth unit to the USB flash drive port of the printer in accordance with the following
procedure.
Refer to Front View for the position of the USB flash drive port.
1.
Make sure that the printer is turned on.
2.
Insert the Bluetooth unit to the USB flash drive port of the printer.
Detach the cap from the Bluetooth...

Important
•
Store the Bluetooth unit with the cap attached.
159
 

Printing Data via Bluetooth Communication
Preparation
Installing the MP Drivers
Checking the Device Name of the Printer
Registering the Printer
Deleting the Printer
160