Canon Pixma Mx522 User Guide

Change passkey (Graphic LCD)/Passkey (Text LCD) Screen
When you select  Enable (Graphic LCD)/ Enable (Text LCD) on the  Security settings (Graphic LCD)/
Security settings  (Text LCD) screen, you are required to set a passkey to register the printer on other
Bluetooth devices.
After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey.•
Graphic LCD
•
Text LCD
 

Specifications
Communication
methodBluetooth v2.0Maximum Speed1.44 MbpsOutputBluetooth Power Class 2
Communication
distance
Line-of-sight distance: approx. 33 ft./10 m * * It may vary depending on factors including the presence of obstacles between communication equipment, radio wave conditions, the presence of magnetic fields
around microwave ovens and locations where electrostatic and radio interference
occur, the types of software and operating systems used, and receiver sensitivity
and antenna...

Copying
 Making Copies  Basic
 Displaying the Preview Screen
  Setting Items
 Reducing or Enlarging a Copy
 Two-Sided Copying
 About Other Copy Functions
 Copying Two Pages to Fit onto a Single Page
 Copying Four Pages to Fit onto a Single Page
 Copying Thick Originals Such as Books
 Copying without Borders
 Collated Copying
 Copying Photos
 

Making CopiesLoad the original to copy.
This section describes the procedure to copy with  Standard copy.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the COPY button.
The Copy standby screen is displayed.
3.
Load paper.
Loading Paper
4.
Load the original document on the platen glass or in the ADF.
Loading Originals
5.
Specify the settings as necessary.
1.
Number of copies
Specify by using the  + or  - button.
2.
Print settings
By pressing the right  Function...

If you load the original in the ADF, do not move the original until copying is complete.
Note
To cancel copying, press the Stop button.
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass...

Displaying the Preview ScreenWhen you load the original on the platen glass and select  Standard copy or Frame erase copy  in
Advanced print , pressing a Function button allows you to preview an image of the printout on the
preview screen.
When  Standard copy  is selected, press the left  Function button on the Copy standby screen.
When  Frame erase copy  is selected, press the right  Function button on the print settings screen.
Important
The preview screen is not available when you load the original in...

Setting ItemsYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
For details on the print setting screen or the setting item for  Photo copy, see Copying Photos .
How to display the print setting screen varies with the copy menu.
•
In  Standard copy :
The following screen is displayed by pressing the right  Function button on the Copy standby
screen.
•
In  Borderless copy  or Frame erase copy :
The following screen is displayed before copying.
Setting Items...

Depending on the copy menu, some setting items cannot be selected. This section describes
the setting items in  Standard copy.
The setting item which cannot be selected is displayed grayed out. For details on the setting items for  Photo copy, see Copying Photos .
Some settings cannot be specified in combination with the setting of other setting item or the
copy menu. If the setting which cannot be specified in combination is selected,  Error details is
displayed on the LCD. In this case, press the left...

8.Collate
Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.
Collated Copying
 

Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you press the right  Function button in the Copy standby screen.
Select the reduction/enlargement method from  Magnif..
Note
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in  Magnif.: Fit to page...