Canon Pixma Mx522 User Guide

PreparationIn order to print via Bluetooth communication with Windows, the following system requirements must besatisfied.
•
Computer
A computer in which an internal Bluetooth module is installed or a computer to which an optional
Bluetooth adapter (available from various manufacturers) is attached.
•
OS
Microsoft Windows 7 (Satisfying any one of the following conditions is needed)
•
Add a Bluetooth Device is displayed in Hardware and Sound under Control Panel
•
Bluetooth Stack for Windows by Toshiba...

•When using Windows XP SP2 or later, and when Bluetooth Devices is displayed
in Printers and Other Hardware under Control Panel
Authenticate the printer as a Bluetooth device on  Bluetooth Devices in Printers and Other
Hardware  under Control Panel .
See  Registering the Printer .•
The operations may vary depending on your operating program. In this case,
refer to your computers operation manual.
 

Installing the MP Drivers
Note
If you use the printer connecting with a computer, the MP Drivers have already been installed. In this
case, move to the next step.
Checking the Device Name of the Printer
Before connecting the Bluetooth unit to the printer for wireless printing, install the MP Drivers to your computer.
If you reinstall the MP Drivers, reinstall the MP Drivers using the Setup CD-ROM.
 

Checking the Device Name of the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the printer in preparation for Bluetooth printing.
Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphicLCD, and the other with a text LCD.
If you need more information about the Bluetooth settings, see  Setting Bluetooth Printing.
1.
Make sure that the printer is turned on.
Confirming that the Power Is On
2.
Attach...

Graphic LCD
Text LCD
5.
Check the device name.
The device name is necessary to register the printer as a Bluetooth device. Be sure to note the device name.
Note
If multiple printer units with the same model name are connected to the system, assigning a
different device name to each printer is recommended for easy identification of the printer you will use. See  Select device name  (Graphic LCD)/Device name (Text LCD) Screen .
After checking the device name, use the  OK button on the printer to finish...

Registering the Printer
Register the printer as a Bluetooth device using  Add a Bluetooth Device (Bluetooth Devices  except for
Windows 7) under  Control Panel.
Note
Before registering the printer on  Add a Bluetooth Device (Bluetooth Devices  except for Windows
7) under  Control Panel , enable the Bluetooth function of your computer.
For more information, refer to your computers operation manual.
If you want to re-register the printer as a Bluetooth device, first delete the registered printer, and then...

4.Select Pair without using a code .
When registering this printer,  Connecting with this device  (Pairing with this wireless device  in
Windows Vista) is displayed.
Note
If you set a passkey on the printer, select  Enter the devices pairing code and input the
passkey, then click  Next.
For more information about setting a passkey, see  Bluetooth settings Screen.
5.
Make sure that the printer is added.
•
In Windows 7, when This device has been successfully added to this computer  is
displayed, click...

In Windows Vista, the Windows needs to install driver software for your Bluetooth
Peripheral Device  screen may be displayed automatically. In this case, click  Dont show this
message again for this device .
In Windows XP:1.
Log into a user account with the administrator privilege.
2.
Click  Control Panel , Printers and Other Hardware , then Bluetooth Devices .
3.
Click Add on the  Devices  sheet.
Add Bluetooth Device Wizard  will start.
4.
Make sure that the printer is turned on, check the  My device is...

Select the same device name as that checked under Checking the Device Name of the Printer.
Note
If the device name is not displayed, see Check 3: Is the printer name which you want to register
displayed in the Printer List?.
6.
Select  Dont use a passkey , and then Next.
Note
If you set a passkey on the printer, select  Use the passkey found in the documentation  and
input the passkey then click  Next.
For more information about a passkey, see  Bluetooth settings Screen.
7.
Click Finish .
 

8.
Check that the device name selected at step 5 is registered on the Devices sheet, and click  OK.
Now, the settings for printing via Bluetooth communication are ready.