Canon Pixma Mx522 User Guide

							PreparationIn order to print via Bluetooth communication with Windows, the following system requirements must besatisfied.
•
Computer
A computer in which an internal Bluetooth module is installed or a computer to which an optional
Bluetooth adapter (available from various manufacturers) is attached.
•
OS
Microsoft Windows 7 (Satisfying any one of the following conditions is needed)
•
Add a Bluetooth Device is displayed in Hardware and Sound under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 7.00.00 or later is installed
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
•
Bluetooth Devices is displayed in Hardware and Sound under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed
Microsoft Windows XP (Satisfying any one of the following conditions is needed)
•
Windows XP SP2 or later is installed, and Bluetooth Devices is displayed in
Printers and Other Hardware under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 3.00.10 or later is installed
For more information about how to confirm the version of Bluetooth Stack for Windows by Toshiba,
see Check 2: Is unsupported Bluetooth driver used?.
In order to connect the Bluetooth unit and print via Bluetooth communication, the following steps are required.
1.
Check that the Bluetooth unit is properly attached to the printer.
See  Attaching to and Removing from the Printer .
2.
Install the MP Drivers.
See  Installing the MP Drivers .
3.
Check the device name of the printer using the LCD.
See  Checking the Device Name of the Printer .
4.
Register the printer for Bluetooth printing.
•
When using Windows 7, and when Add a Bluetooth Device is displayed in
Hardware and Sound under Control Panel
Authenticate the printer as a Bluetooth device on  Add a Bluetooth Device in Hardware and
Sound  under  Control Panel .
See  Registering the Printer .
•
When using Windows Vista, and when Bluetooth Devices is displayed in
Hardware and Sound under Control Panel
Authenticate the printer as a Bluetooth device on  Bluetooth Devices in Hardware and Sound
under  Control Panel .
See  Registering the Printer .
 
						

							•When using Windows XP SP2 or later, and when Bluetooth Devices is displayed
in Printers and Other Hardware under Control Panel
Authenticate the printer as a Bluetooth device on  Bluetooth Devices in Printers and Other
Hardware  under Control Panel .
See  Registering the Printer .•
The operations may vary depending on your operating program. In this case,
refer to your computers operation manual.
 
						

							Installing the MP Drivers
Note
If you use the printer connecting with a computer, the MP Drivers have already been installed. In this
case, move to the next step.
Checking the Device Name of the Printer
Before connecting the Bluetooth unit to the printer for wireless printing, install the MP Drivers to your computer.
If you reinstall the MP Drivers, reinstall the MP Drivers using the Setup CD-ROM.
 
						

							Checking the Device Name of the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the printer in preparation for Bluetooth printing.
Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphicLCD, and the other with a text LCD.
If you need more information about the Bluetooth settings, see  Setting Bluetooth Printing.
1.
Make sure that the printer is turned on.
Confirming that the Power Is On
2.
Attach the Bluetooth unit.
For information about how to attach the Bluetooth unit, see  Attaching to and Removing from the
Printer .
3.
Display the  Bluetooth settings  (Graphic LCD)/Bluetooth settings  (Text LCD)
screen on the LCD.
For information about how to display the  Bluetooth settings (Graphic LCD)/Bluetooth settings  (Text
LCD) screen, refer to Changing the Machine Settings on the LCD.
Graphic LCD
Text LCD
Note
If the  Bluetooth settings  (Graphic LCD)/Bluetooth settings  (Text LCD) screen is not displayed
on the LCD, the Bluetooth unit may not be attached correctly. Remove the Bluetooth unit from the printer and attach it once again.
For details, see  Attaching to and Removing from the Printer .
If the  Bluetooth settings  (Graphic LCD)/Bluetooth settings  (Text LCD) screen is not yet
displayed, the Bluetooth unit may be faulty. In this case, contact the service center.
4.
Select  Select device name  (Graphic LCD)/Device name (Text LCD).
The  Select device name  (Graphic LCD)/Device name (Text LCD) screen is displayed.
 
						

							Graphic LCD
Text LCD
5.
Check the device name.
The device name is necessary to register the printer as a Bluetooth device. Be sure to note the device name.
Note
If multiple printer units with the same model name are connected to the system, assigning a
different device name to each printer is recommended for easy identification of the printer you will use. See  Select device name  (Graphic LCD)/Device name (Text LCD) Screen .
After checking the device name, use the  OK button on the printer to finish setting.
After checking the Bluetooth settings using the LCD, register the printer on your computer.
Registering the Printer
 
						

							Registering the Printer
Register the printer as a Bluetooth device using  Add a Bluetooth Device (Bluetooth Devices  except for
Windows 7) under  Control Panel.
Note
Before registering the printer on  Add a Bluetooth Device (Bluetooth Devices  except for Windows
7) under  Control Panel , enable the Bluetooth function of your computer.
For more information, refer to your computers operation manual.
If you want to re-register the printer as a Bluetooth device, first delete the registered printer, and then
re-register it.
Deleting the Printer
The procedure to authenticate the computer may vary depending on the computer you are using.
In Windows 7 or Windows Vista:
In Windows XP:
In Windows 7 or Windows Vista: The following procedure is described using the screens in Windows 7.
1.
Log into a user account with the administrator privilege.
2.
Select items from  Control Panel as shown below.
•
In Windows 7, click  Control Panel, then Add a Bluetooth Device  under Hardware and
Sound .
•
In Windows Vista, click  Control Panel, Bluetooth Device  under Hardware and Sound , then
Add Wireless Device .
3.
Select the device name of the printer and click  Next.
Select the same device name as that checked under  Checking the Device Name of the Printer.
Note
If the device name is not displayed, see Check 3: Is the printer name which you want to register
displayed in the Printer List?.
 
						

							4.Select Pair without using a code .
When registering this printer,  Connecting with this device  (Pairing with this wireless device  in
Windows Vista) is displayed.
Note
If you set a passkey on the printer, select  Enter the devices pairing code and input the
passkey, then click  Next.
For more information about setting a passkey, see  Bluetooth settings Screen.
5.
Make sure that the printer is added.
•
In Windows 7, when This device has been successfully added to this computer  is
displayed, click  Close.
•
In Windows Vista, when  This wireless device is paired with this computer  is displayed, click
Close .
Now, the settings for printing via Bluetooth communication are ready.
Note
 
						

							In Windows Vista, the Windows needs to install driver software for your Bluetooth
Peripheral Device  screen may be displayed automatically. In this case, click  Dont show this
message again for this device .
In Windows XP:1.
Log into a user account with the administrator privilege.
2.
Click  Control Panel , Printers and Other Hardware , then Bluetooth Devices .
3.
Click Add on the  Devices  sheet.
Add Bluetooth Device Wizard  will start.
4.
Make sure that the printer is turned on, check the  My device is set up and ready to be found check
box and then click  Next.
5.
Select the device name of the printer and click  Next.
 
						

							Select the same device name as that checked under Checking the Device Name of the Printer.
Note
If the device name is not displayed, see Check 3: Is the printer name which you want to register
displayed in the Printer List?.
6.
Select  Dont use a passkey , and then Next.
Note
If you set a passkey on the printer, select  Use the passkey found in the documentation  and
input the passkey then click  Next.
For more information about a passkey, see  Bluetooth settings Screen.
7.
Click Finish .
 
						

							8.
Check that the device name selected at step 5 is registered on the Devices sheet, and click  OK.
Now, the settings for printing via Bluetooth communication are ready.