Canon Pixma Mx522 User Guide

							machine cannot distinguish the document color from the shadow and this may cause slight
cropping or a shadow on the crease. 
						

							Copying without BordersYou can copy images so that they fill the entire page without borders.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Load the photo paper.
Loading Paper
3.
Press the  MENU button.
The menu screen is displayed.
4.
Select   Photo , then press the  OK button.
5.
Select  Borderless copy , then press the OK button.
6.
Load the original on the platen glass.
Loading Originals
Note
When you use this function, load the original on the platen glass.
7.
Specify the number of copies by using the  + or  - button.
Change the print settings as necessary.
Setting Items
8.
Press the  Color button for color copying, or the  Black button for black & white
copying.
The machine starts copying.
Note
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole
page. You can change the width to be cropped from the borders of the original image as needed.
However, the cropped area will be larger if the extension amount is large.
For details:
Extended copy amount
For details on the paper size and the media type available for borderless copying:
Printing Area
 
						

							Collated CopyingWhen you select  ON for  Collate  in Standard copy , you can obtain sorted printouts when making
multiple copies of a multi-paged original. In addition, you can copy originals on both sides of paper.
•
When  ON is selected:
•
When  OFF is selected:
Note
When you use this function, load the original in the ADF.
This function can be used in combination with Two-sided copy.
If you use this function in combination, select  2-sided for 2-sidedPrintSetting  and the stapling
side of print paper on the Print settings screen.
For details on two-sided copy function:
Two-Sided Copying
The number of pages the machine can read varies with the document. If  Device memory is
full. Cannot continue process.  appears on the LCD when scanning, reduce the number of
document pages to scan and try copying again.
 
						

							Copying PhotosYou can scan printed photos and print them all at one time.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Load the photo paper.
Loading Paper
3.
Press the  MENU button.
The menu screen is displayed.
4.
Select   Photo , then press the  OK button.
5.
Select  Photo copy , then press the  OK button.
6.
Confirm the on-screen instructions, then press the  OK button.
7.
Load the printed photo on the platen glass following the on-screen instructions,
then press the  OK button.
Note
For details on loading photos on the platen glass:
Loading Originals
When scanning is complete, the print settings confirmation screen is displayed.
8.
Specify the settings as necessary. Use the 
 button to change the setting item and use the  button to change the setting.
Note
Depending on the setting item, some settings cannot be specified in combination with the
setting of other setting items. If the setting cannot be specified in combination is selected,
Error details  is displayed on the LCD. In this case, press the left  Function button to confirm
the message, then change the setting.
1.
Page size
Select the page size of the loaded paper.
 
						

							2.Type (Media type)
Select the media type of the loaded paper.3.
Print qlty  (Print quality)
Select print quality according to the original.
4.
Border  (Bordered/Borderless print)
Select bordered or borderless print.
5.
Photo fix
Select  No correction , Auto photo fix , or Fade restoration .
Note
When No correction  is selected, the machine prints the scanned image without
correction.
When  Auto photo fix  is selected, the machine corrects the scanned image
automatically.
When  Fade restoration  is selected, the machine corrects the scanned image that
have faded over time.
9.
Specify the number of copies by using the  + or  - button.
Note
By pressing the right  Function button, you can preview an image of the printout on the
preview screen. Use the 
 button to change the display.
If  appears on the photo, the printed photo may not be scanned properly. Rescan the
printed photo.
10.
Press the  Color button for color printing, or the  Black button for black & white
printing.
The machine starts printing.
Note
If the printed photo was not scanned properly, the confirmation screen asking you if you
continue printing is displayed. By selecting  Yes, the machine starts printing. If you rescan
the photo, select  No and scan the photo again.