Canon Pixma Mx522 User Guide

							Change passkey (Graphic LCD)/Passkey (Text LCD) Screen
When you select  Enable (Graphic LCD)/ Enable (Text LCD) on the  Security settings (Graphic LCD)/
Security settings  (Text LCD) screen, you are required to set a passkey to register the printer on other
Bluetooth devices.
After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey.•
Graphic LCD
•
Text LCD
 
						

							Specifications
Communication
methodBluetooth v2.0Maximum Speed1.44 MbpsOutputBluetooth Power Class 2
Communication
distance
Line-of-sight distance: approx. 33 ft./10 m * * It may vary depending on factors including the presence of obstacles between communication equipment, radio wave conditions, the presence of magnetic fields
around microwave ovens and locations where electrostatic and radio interference
occur, the types of software and operating systems used, and receiver sensitivity
and antenna performance of communication equipment.
Profile
SPP (Serial Port Profile)
OPP (Object Push Profile)
BIP (Basic Imaging Profile)
HCRP (Hardcopy Cable Replacement Profile)
Compatible PCs
A computer in which an internal Bluetooth module is installed or a computer to
which an optional Bluetooth adapter (available from various manufacturers) is attached.
OS/Software:
Microsoft Windows 7 (Satisfying any one of the following conditions is needed)•
Add a Bluetooth Device  is displayed in Hardware and Sound  under Control
Panel
•
Bluetooth Stack for Windows by Toshiba Version 7.00.00 or later is installed
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
•
Bluetooth Devices  is displayed in Hardware and Sound  under Control
Panel
•
Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed
Microsoft Windows XP (Satisfying any one of the following conditions is needed)
•
Windows XP SP2 or later is installed, and  Bluetooth Devices is displayed in
Printers and Other Hardware  under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 3.00.10 or later is installed
Frequency band2.4 GHz band (2.400 GHz to 2.4835 GHz)Power supplySupplied from the USB flash drive port on the printer, DC 4.4 V to 5.25 VMaximum power
consumption500 mW (MAX)Operating
temperature5 to 35°C (41 to 95°F)Operating humidity10 to 90% RH (no condensation)Dimensions (Width x
Depth x Height)18.5 (W) x 47.5 (D) x 8.7 (H) mm (with cap attached)
0.73 (W) x 1.87 (D) x 0.35 (H) inchesWeightApprox. 7 g (0.25 oz) 
						

							Copying
 Making Copies  Basic
 Displaying the Preview Screen
  Setting Items
 Reducing or Enlarging a Copy
 Two-Sided Copying
 About Other Copy Functions
 Copying Two Pages to Fit onto a Single Page
 Copying Four Pages to Fit onto a Single Page
 Copying Thick Originals Such as Books
 Copying without Borders
 Collated Copying
 Copying Photos
 
						

							Making CopiesLoad the original to copy.
This section describes the procedure to copy with  Standard copy.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the COPY button.
The Copy standby screen is displayed.
3.
Load paper.
Loading Paper
4.
Load the original document on the platen glass or in the ADF.
Loading Originals
5.
Specify the settings as necessary.
1.
Number of copies
Specify by using the  + or  - button.
2.
Print settings
By pressing the right  Function button, the print settings screen is displayed.
On the print settings screen, you can change the settings of page size, media type, and print
quality and so on.
Setting Items
3.
Preview
By pressing the left  Function button, you can preview an image of the printout on the
preview screen.
Displaying the Preview Screen
6.
Press the  Color button for color copying, or the  Black button for black & white
copying.
The machine starts copying.
Remove the original on the platen glass or from the document output slot after copying is
complete.
Important
If you load the original on the platen glass, do not open the document cover or remove the
original while  Scanning document...  is displayed on the screen.
 
						

							If you load the original in the ADF, do not move the original until copying is complete.
Note
To cancel copying, press the Stop button.
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press the same button (the  Color button or the  Black
button) as the one which you previously pressed.
Important
When you load the original on the platen glass, move the document cover gently.
Note
When  Print qlty  (print quality) is set  High, or you load the original in the ADF, you cannot add
the copying job.
When you add the copying job, the number of copies or the settings such as the page size or
media type cannot be changed.
If you press the  Stop button while reserve copying is in progress, the screen to select the
method to cancel copying is displayed. If you select  Cancel all reservations then press the OK
button, you can cancel copying all scanned data. If you select  Cancel the last reservation, then
press the  OK button, you can cancel the last copying job.
If you set a document of too many pages to add the copying job,  Cannot add more copy jobs.
Please wait a while and redo the operation.  may appear on the LCD. Press the OK button and
wait a while, then try copying again.
If  Failed to reserve the copy job. Start over from the beginning.  appears on the LCD when
scanning, press the  OK button, then press the  Stop button to cancel copying. After that, copy the
documents that have not been finished copying.
 
						

							Displaying the Preview ScreenWhen you load the original on the platen glass and select  Standard copy or Frame erase copy  in
Advanced print , pressing a Function button allows you to preview an image of the printout on the
preview screen.
When  Standard copy  is selected, press the left  Function button on the Copy standby screen.
When  Frame erase copy  is selected, press the right  Function button on the print settings screen.
Important
The preview screen is not available when you load the original in the ADF.
In the following conditions, you cannot use the left  Function button when the Copy standby
screen is displayed.
2-sided  is selected for  2-sidedPrintSetting .
2-on-1 copy or 4-on-1 copy  is selected for  Layout.
ON is selected for  Collate.
When  2-sided , 2-on-1 copy , or 4-on-1 copy  is selected and the original is loaded on the platen
glass, you can set to display the preview screen after scanning the original is finished.
Two-Sided Copying
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
Collated Copying
The original will be scanned to display the preview image. Therefore, do not open the document
cover until the preview screen is displayed.
Originals are rescanned after displaying the preview screen and before copying starts.
Therefore, do not open the document cover or remove the original from the platen glass while Scanning document...  is displayed.
1.
Preview of the original
The original that is set on the platen glass is displayed. If the displayed image is skewed, refer to Loading Originals and reset the original properly, then display the preview screen again and
preview the original.
2.
Page size
A frame showing the selected page size appears over the image. The inside of the frame will be printed.
3.
Magnification
The magnification setting, which was set when the preview screen was displayed, is displayed. If the setting other than  Fit to page is selected, you can change the magnification setting using the
 button.
 
						

							Setting ItemsYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
For details on the print setting screen or the setting item for  Photo copy, see Copying Photos .
How to display the print setting screen varies with the copy menu.
•
In  Standard copy :
The following screen is displayed by pressing the right  Function button on the Copy standby
screen.
•
In  Borderless copy  or Frame erase copy :
The following screen is displayed before copying.
Setting Items
You can specify the following setting items.
Use the 
 button to change the setting item and use the  button to change the setting.
Note
 
						

							Depending on the copy menu, some setting items cannot be selected. This section describes
the setting items in  Standard copy.
The setting item which cannot be selected is displayed grayed out. For details on the setting items for  Photo copy, see Copying Photos .
Some settings cannot be specified in combination with the setting of other setting item or the
copy menu. If the setting which cannot be specified in combination is selected,  Error details is
displayed on the LCD. In this case, press the left  Function button to confirm the message, then
change the setting.
The settings of the page size, media type, etc. are retained even if the machine is turned off.
When copying starts in the copy menu that is not available with the specified setting,  The
specified function is not available with current settings.  is displayed on the LCD. Change the
setting, following the on-screen instructions.
1.
Magnif.  (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2.
Intensity
Specify the intensity. When  Auto is selected, the intensity is adjusted automatically according to
the originals loaded on the platen glass.  Auto is displayed on the Copy standby screen.
Note
When  Auto is selected, load the original on the platen glass.
3.
Page size
Select the page size of the loaded paper.
4.
Type  (Media type)
Select the media type of the loaded paper.
5.
Print qlty  (Print quality)
Adjust print quality according to the original.
Important
If you use  Fast with  Type set to  Plain paper  and the quality is not as good as expected,
select  Standard  or High  for Print qlty  and try copying again.
Select High for Print qlty  to copy in grayscale. Grayscale renders tones in a range of
grays instead of black or white.
6.
Layout
Select the layout.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
7.
2-sidedPrintSetting
Select whether to perform two-sided copying.
Two-Sided Copying
 
						

							8.Collate
Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.
Collated Copying
 
						

							Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you press the right  Function button in the Copy standby screen.
Select the reduction/enlargement method from  Magnif..
Note
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in  Magnif.: Fit to page
Note
When  Fit to page  is selected, load the original on the platen glass.
When you select  Fit to page, the page size may not be detected correctly depending on
the original. In this case, select the setting other than  Fit to page.
•
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio for size of original and page size.The setting in  Magnif.: 70% A4->A5 /86% A4->B5 /94% A4->LTR /115% B5->A4 /141% A5-
>A4 /156% 5x7->LTR /183% 4x6->LTR
Note
Some of the preset ratios are not available depending on the country or region of purchase.
•
Ratio specified copy
You can specify the copy ratio as a percentage to reduce or enlarge copies.