Canon Pixma Mx522 User Guide

Printing from Mobile Phone via Bluetooth Communication
This section describes the procedure to print photos through Bluetooth communication from a mobile
phone with the optional Bluetooth Unit BU-30.
When printing from a mobile phone through Bluetooth communication, refer also to your mobile phones
instruction manual.
For the procedure to print through Bluetooth communication from the computer, refer to  About Bluetooth
Communication .
Note
Mobile phones supporting OPP (Object Push Profile) or BIP (Basic...

Mobile phone print settings7.
Start printing from a mobile phone.
•
For the device name, select the default value Canon XXX-1 (where XXX is your machines
name).
•
If you are required to input a passkey, input the default value 0000.
You can change the device name of the machine, passkey, and so on from the  Bluetooth
settings  screen.
Setting Bluetooth Printing
Note
Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions
below. Printing speed may vary depending on...

About Bluetooth Communication
 Handling Precautions
 Preparation to Use the Bluetooth Unit
 Printing Data via Bluetooth Communication
 Basic Procedure for Printing via Bluetooth Communication
 Bluetooth Settings
 Specifications
 

Handling Precautions
 Shipping the Bluetooth Unit
 

Shipping the Bluetooth Unit
The Bluetooth unit may not be used in countries or regions other than the country or region where it was
purchased due to local laws and regulations. Please note that the use of the Bluetooth unit in such countries or regions may lead to penalties and that Canon should not be liable for such punishment.
 

Preparation to Use the Bluetooth Unit
 Bluetooth Unit
 Attaching to and Removing from the Printer
 

Bluetooth Unit
The Bluetooth Unit BU-30 (hereafter referred to as the Bluetooth unit) is an adaptor which can be used with
a Canon IJ printer with Bluetooth interface.
By attaching the Bluetooth unit to a Canon IJ printer with Bluetooth interface, wireless printing from a Bluetooth enabled device, such as a computer or mobile phone, is possible.
Note
Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions below.
Printing speed may vary depending on the following...

Attaching to and Removing from the Printer
Attaching the Bluetooth Unit to the Printer
Removing the Bluetooth Unit from the Printer
Attaching the Bluetooth Unit to the Printer
Attach the Bluetooth unit to the USB flash drive port of the printer in accordance with the following procedure.
Refer to Front View for the position of the USB flash drive port.
1.
Make sure that the printer is turned on.
Confirming that the Power Is On
2.
Insert the Bluetooth unit to the USB flash drive port of the printer....

Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you remove the
Bluetooth unit.
Important
Store the Bluetooth unit with the cap attached.
 

Printing Data via Bluetooth Communication
 Preparation
 Installing the MP Drivers
 Checking the Device Name of the Printer
 Registering the Printer
 Deleting the Printer