Canon Pixma Mp830 User Guide

Chapter 1 29Before Printing
zLoading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
1Load the envelope against the Cover Guide on the right side of the Paper Support 
with the print side facing UP, and the rear flaps DOWN on the left.
Important
Do not load the paper beyond this Load Limit Mark (A).
Note
zYou can use general copy paper or Canon’s Super White Paper SW-201. 
zYou can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm or 0.52 inches in 
height) in the Auto...

30Chapter 1Before Printing
2Pinch the Paper Guide and slide it against the left side of the envelope.
3Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
4Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in 
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
zLoading Other Small-Sized Paper in the Auto Sheet Feeder
1Load the paper into the Auto Sheet Feeder with the print side facing UP and align 
the Cover Guide on...

Chapter 1 31Before Printing
3Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
4When performing copy direct printing without using a computer, press [Settings] to 
select the page size. When using the machine connected to a computer, select the 
page size of the loaded paper from [Page Size] in the printer driver.
For a detailed description of the printer driver settings, see “Printing with Windows” on 
page 123, or “Printing with Macintosh” on page 126.
Important
Always load paper in...

32Chapter 1Before Printing
„Loading the Print Media in the Cassette
Depending on page size and media type, some paper must always be loaded in the Auto Sheet 
Feeder.
If you intend to use only the Cassette, check any usage restrictions in advance.
See“Recommended Paper and Requirements” on page 22.
zLoading Paper
1Flatten the four corners of the paper before loading it.
2Prepare to load paper.
(1)Pull out the Cassette from the machine.
3Load the paper. (Print side facing DOWN)
(1)Load the paper into the...

Chapter 1 33Before Printing
(3)Slide the Paper Guides to fit the loaded paper stack.
4Insert the Cassette into the machine.
(1)Insert the Cassette into the machine.
Push the Cassette all the way into the machine.
Important
Do not load the paper beyond this Load Limit Mark (A).
Note
zYou can use general copy paper or Canon’s Super White Paper SW-201. 
zYou can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm or 0.52 inches in 
height) in the Cassette. However, do not stack more than 50 sheets...

34Chapter 1Before Printing
5Prepare the Paper Output Tray.
(1)Press the Open Button to open the Paper Output Tray.
(2)Open the Paper Output Tray Extension completely.
(3)Press [Feed Switch] so that the Cassette Lamp (A) lights.
zLoading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
1Align the envelope stack against the right side of the Cassette with the print side 
facing DOWN, and the rear flaps UP on the left side.
Note
You can also select the paper source with the printer...

Chapter 1 35Before Printing
2Slide the Paper Guides against the sides of the envelope.
3Press [Feed Switch] so that the Cassette Lamp lights.
4Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in 
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
Note
Fold the envelope flap shut (A).
Note
Printing direction (B).
(A)
1
2
3
(B)
 

36Chapter 1Before Printing
zLoading 4" x 6"- or 5" x 7"-Sized Paper in the Cassette
1Load the paper into the Cassette with the print side facing DOWN.
2Align the paper stack against the right side of the Cassette.
3Slide the Paper Guides to fit the loaded paper stack.
4Press [Feed Switch] so that the Cassette Lamp lights.
Important
zDo not leave photo paper, such as Photo Paper Pro, in the Cassette for a long time. This 
may cause paper discoloration due to natural aging.
zIf you are...

Chapter 1 37Before Printing
5When performing copy direct printing without using a computer, press [Settings] to 
select the page size. When using the machine connected to a computer, select the 
page size of the loaded paper from [Page Size] in the printer driver.
For a detailed description of the printer driver settings, see “Printing with Windows” on 
page 123, or “Printing with Macintosh” on page 126.
Changing the Print Settings
This section describes the Settings screen that can be specified on the...

38Chapter 1Before Printing
2Select the Setting tab.
(1)Use [ ] or [ ] to select the Setting tab. 
Select tab 1 here.
3Select the setting item.
(1)Use [ ] or [ ] to select the setting item.
Select  here.
4Change the setting.
(1)Use [ ] or [ ] to change the setting.
Change to  here.
5Complete setting.
(1)Press [Settings].
Return to the Settings screen.