Canon Pixma Mp830 User Guide

9
Print Head/Ink tanksFor safety reasons, store print heads and ink tanks out of the reach of small children. 
If a child ingests any ink, consult a doctor immediately. 
Do not shake print heads or ink tanks. 
Ink may leak out and stain clothing or the surrounding area. 
Never touch the Print Head. 
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock and injury to persons, including the...

10
Reading the Document
Symbols Used in This Guide
Please read the list below of symbols used in this guide. The following symbols are used to indicate 
important instructions. Be sure to obey these instructions.
Warning
Indicates a warning concerning operations that may lead to death or injury to persons if not 
performed correctly. In order to use the machine safely, always pay attention to these warnings. 
Caution
Indicates a caution concerning operations that may lead to injury to persons or damage...

11
Legal Limitations on Use of Your Product 
and Use of Images
It may be unlawful to make copies of, scan, print or use reproductions of the following documents. 
The list provided is non-exhaustive. When in doubt, check with a legal representative in your 
jurisdiction.
zPaper money
zMoney orders
zCertificates of deposit
zPostage stamps (canceled or uncanceled)
zIdentifying badges or insignias
zSelective service or draft papers
zChecks or drafts issued by governmental 
agencies
zMotor vehicle licenses...

Chapter 1
12Chapter 1Before Printing
Before Printing
Main Components and Their Functions
„Front View
(1) ADF (Automatic Document Feeder)
Automatically scans in documents loaded in the Document Tray.
(2) Feeder Cover
Open when clearing jammed documents.
(3) Document Guides
Adjust these guides to match the document width.
(4) Paper Support
Supports paper loaded on the tray. Extend it before loading paper by putting your finger in 
the rounded indent and pulling out the extension until it stops.
(5) Paper...

Chapter 1 13Before Printing
(12) Direct Print Port
Used when printing directly from a digital camera or a digital video camcorder or a mobile 
phone equipped with a camera compatible with PictBridge or Canon Bubble Jet Direct.
(13) Paper Output Tray
Open this tray before copying or printing by pressing the Open Button. However, even if it 
is closed, the tray will open automatically when copying or printing is started.
Close the tray when it is not in use.
(14) Platen Glass
Used to load a document to be...

14Chapter 1Before Printing
„Rear View and Interior
(19) Print Head Lock Lever
Used to fix the Print Head.
(20) Ink Tank Lamp
Lights or flashes red to indicate the status of the ink tank. You can check the status of 
each ink tank according to the way its lamp flashes. See “Ink Tank Lamps” on page 15.
(21) Print Head Holder
Used to install a Print Head.
(22) Scanning Unit (Printer Cover)
This is the unit used to scan documents. Open when replacing the ink tanks or clearing 
jammed paper.
(23) Inner Cover...

Chapter 1 15Before Printing
(26) Duplexing Transport Unit
Open when clearing jammed paper after pulling out the Cassette.
(27) Power Connector
This is the connector used to connect the provided power cord.
(28) Rear Cover
Open when clearing jammed paper.
(29) External Device Jack
Connects the external device.
(30) Telephone Line Jack
Connects with the telephone line.
(31) USB Connector (for computer)
This is the connector used to connect the machine to a computer using a USB cable.
Important
While the...

16Chapter 1Before Printing
„Operation Panel Name and Functions
(1) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the 
Document Cover is closed.
(2) [COPY]
Switches the machine to Copy mode. Flashes when the machine is turned on.
(3) [FAX]
Switches the machine to Fax mode.
(4) [SCAN]
Switches the machine to Scan mode. This button is used when the machine is connected 
to a computer. (Refer to the Scan Guide.)
(5) [MEMORY CARD]
Switches the machine to Memory card mode.
(6)...

Chapter 1 17Before Printing
(14) Auto Sheet Feeder Lamp
Lit when the Auto Sheet Feeder is selected.
(15) Cassette Lamp
Lit when the Cassette is selected.
(16) [Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between 
the Auto Sheet Feeder and Cassette.
(17) [Photo Index Sheet]
Switches to Photo Index Sheet mode. See “Printing by Using the Photo Index Sheet” on 
page 66.
(18) [Enlarge/Reduce]
Sets the enlargement or reduction ratio for copying.
(19) [Search]...

18Chapter 1Before Printing
Turning the Machine ON and OFF
Turn on the machine before starting printing.
„Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
1Press [ON/OFF].
[COPY] flashes green for a while, and then turns on.
„Turning off the Machine
1To turn off the machine, press [ON/OFF].
The machine is off when the currently selected Mode button (e.g. COPY) stops flashing and 
all Operation Panel lamps are off.
Note
If preparatory...