Canon Pixma Ip1900 User Guide

							Specify a scaling factor 
Directly type in a value into the Scaling box. 
The current settings are displayed in the Settings Preview on the left side of the printer driver. 
5.Complete the setup 
Click OK. 
When you execute print, the document will be printed with the specified scale. 
Important 
If the application software with which you created the original has the scaled printing function,
configure the settings on your application software. You do not need to also configure the same
setting in the printer driver. 
When Scaled Printing is selected, the Staple Side list box appears grayed out and is unavailable
(when Duplex Printing is not selected). 
When Borderless Printing check box is checked, Scaled Printing cannot be selected. 
Note 
Selecting Scaled Printing changes the printable area. 
Page top
Стр. 191 из 334 стр. Scaled Printing
 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Page Layout Printing 
Page Layout Printing 
The page layout printing function allows you to print more than one page image on a single sheet of
paper. 
The procedure for performing page layout printing is as follows: 
1.Open the printer driver setup window
2.Set page layout printing 
Select Page Layout Printing from the Page Layout list on the Page Setup tab. 
The current settings are displayed in the Settings Preview on the left side of the printer driver. 
3.Select the print paper size 
Select the size of the paper loaded in the printer from the Printer Paper Size list. 
Now you have finished setting the layout of the document from left to right. 
4.Set the number of pages to be printed on one sheet and the page sequence 
If necessary, click Specify..., specify the following settings in the Page Layout Printing dialog box, and
click OK. 
Стр. 192 из 334 стр. Page Layout Printing
 
						

							Pages 
To increase the number of pages to be included on a single sheet of paper, select a desired
number of pages from the list. 
Page Order 
To change the page arrangement order, select an icon from the list to change the page placement
order. 
Page Border 
To print a page border around each document page, check this check box. 
5.Complete the setup 
Click OK on the Page Setup tab. 
When you execute print, the specified number of pages will be arranged on each sheet of paper in
the specified order. 
Important 
When Borderless Printing check box is checked, Page Layout Printing cannot be selected. 
Page top
Стр. 193 из 334 стр. Page Layout Printing
 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Poster Printing 
Poster Printing 
The poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. When the pages are pasted together, they form a large print
like a poster. 
The procedure for performing poster printing is as follows: 
Setting Poster Printing 
1.Open the printer driver setup window
2.Set poster printing 
Select Poster Printing from the Page Layout list on the Page Setup tab. 
The current settings are displayed in the Settings Preview on the left side of the printer driver. 
3.Select the print paper size 
Select the size of the paper loaded in the printer from the Printer Paper Size list. 
Now you have finished setting 2 by 2-page poster printing. 
4.Set the number of image divisions and the pages to be printed. 
If necessary, click Specify..., specify the following settings in the Poster Printing dialog box, and then
click OK. 
Стр. 194 из 334 стр. Poster Printing
 
						

							Image Divisions 
Select the number of divisions (vertical x horizontal) from the Image Divisions list. As the number of
divisions increases, the number of sheets used for printing increases, allowing you to create a
larger poster. 
Print Cut/Paste in margins 
To leave out words Cut and Paste, uncheck this check box. 
Important 
This feature is unavailable when the 64-bit printer driver is used. 
Print Cut/Paste lines in margins 
To leave out cut lines, uncheck this check box. 
Pages 
To reprint only specific pages, enter the page number you want to print. To print multiple pages,
specify by separating the pages with commas or entering a hyphen between the page numbers. 
Note 
You can also specify the print range by clicking the pages in the setup preview. 
5.Complete the setup 
Click OK on the Page Setup tab. 
When you execute print, the document will be divided into several pages during printing. 
After all poster pages have been printed, paste the pages together to create a poster. 
Printing Only Specific Pages 
If ink becomes faint or runs out during printing, you can print the pages you still need, by following the
procedure below: 
1.Set the print range 
In the Settings Preview on the left of the Page Setup tab, click the pages that do not need to be
printed. 
The pages that were clicked are deleted, and only the pages to be printed are displayed. 
Стр. 195 из 334 стр. Poster Printing
 
						

							Note 
Click the deleted pages to display them again. 
Right-click the Settings Preview to select Print all pages or Delete all pages. 
2.Complete the setup 
After completing the page selection, click OK. 
When you execute print, only specified pages will be printed. 
Important 
When Poster Printing is selected, the Duplex Printing and Print from Last Page check boxes and the
Staple Side list box appear grayed out and are unavailable. 
When Borderless Printing check box is checked, Poster Printing cannot be selected. 
Since poster printing enlarges the document when printing it, the print results may become coarse. 
Page top
Стр. 196 из 334 стр. Poster Printing
 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Booklet Printing 
Booklet Printing 
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center. 
The procedure for performing booklet printing is as follows: 
1.Open the printer driver setup window
2.Set booklet printing 
Select Booklet Printing from the Page Layout list on the Page Setup tab. 
The current settings are displayed in the Settings Preview on the left side of the window. 
3.Select the print paper size 
Select the size of the paper loaded in the printer from the Printer Paper Size list. 
4.Set the margin for stapling and the margin width 
Click Specify..., specify the following settings in the Booklet Printing dialog box, and then click OK. 
Margin for stapling 
Select which side the stapling margin should be on when the booklet is completed. 
Стр. 197 из 334 стр. Booklet Printing
 
						

							Insert blank page 
To leave one side of a sheet blank, check Insert blank page check box, and select the page to be left
blank. 
Margin 
Enter the margin width. The specified width from the center of the sheet becomes the margin for one
page. 
Page Border 
To print a page border around each document page, check the Page Border check box. 
5.Complete the setup 
Click OK on the Page Setup tab. 
When you execute print, the document will be printed on one side of a sheet of paper. When the
printing of one side is complete, set the paper correctly by following the message and click OK. 
When the printing of the other side is complete, fold the paper at the center of the margin and make
a booklet. 
Important 
Booklet Printing is unavailable when: 
A media type other than Plain Paper is selected from the Media Type list. 
Borderless Printing check box is checked. 
When Booklet Printing is selected, Duplex Printing, Staple Side, Print from Last Page, and Collate
appear grayed out and are unavailable. 
Note 
The stamp and background are not printed on blank sheets inserted with the Insert blank page
function of Booklet Printing. 
Page top
Стр. 198 из 334 стр. Booklet Printing
 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Duplex Printing 
Duplex Printing 
The procedure for printing data on both sides of a sheet of paper is as follows: 
1.Open the printer driver setup window
2.Set duplex printing 
Check the Duplex Printing check box on the Page Setup tab. 
3.Select the layout 
Select Normal-size Printing (or Fit-to-Page Printing, Scaled Printing, or Page Layout Printing) from
the Page Layout list. 
4.Specify the side to be stapled 
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
Staple Side. If you want to change the setting, select another value from the list. 
5.Set the margin width 
If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK. 
6.Complete the setup 
Click OK on the Page Setup tab. 
When you execute print, the document will be printed on one side of a sheet of paper. When the
printing of one side is complete, set the paper correctly by following the message and click OK. The
document will be printed on the opposite side. 
Important 
Стр. 199 из 334 стр. Duplex Printing
 
						

							Duplex Printing is unavailable when: 
A media type other than Plain Paper is selected from the Media Type list. 
Poster Printing is selected from the Page Layout list. 
When Booklet Printing is selected from the Page Layout list, Duplex Printing and Staple Side
appear grayed out and are unavailable. 
Note 
If the Media Type dialog box appears when performing borderless printing during duplex printing,
select Plain Paper. 
If the back side of the paper becomes smudged during duplex printing, perform Bottom Plate
Cleaning in the Maintenance tab. 
Page top
Стр. 200 из 334 стр. Duplex Printing