Canon Pixma Ip1900 User Guide

							4.Click Auto Photo Fix, then click OK.
The entire photo is corrected automatically and the  (Correction/Enhancement) mark appears on
the upper left of the image.
Note
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
5.Click Save Selected Image or Save All Corrected Images.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected images.
6.Click Exit.
Note
The corrections will be lost if you exit before saving corrected images.
Page top
Стр. 121 из 334 стр. Using the Auto Photo Fix Function
 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos
 > Using the Red-Eye Correction Function
Using the Red-Eye Correction Function
You can correct red eyes caused by a camera flash.
You can perform the Red-Eye Correction function either automatically or manually.
Note
Photo Print allows you to automatically correct red eyes when printing. To correct automatically,
select Enable Auto Photo Fix in Color correction for printing on the Advanced tab of the Preferences
dialog box and select the Enable Red-Eye Correction checkbox.
1.Select photos in the Select Images screen, then click  (Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images window by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images Window for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list displayed in the lower part of the
Correct/Enhance Images window.
The image appears in Preview.
Note
If only one image is selected, the thumbnail does not appear below Preview.
Auto Correction
3.Make sure that Auto is selected.
4.Click Red-Eye Correction.
Стр. 122 из 334 стр. Using the Red-Eye Correction Function
 
						

							5.Click OK.
Red eyes are corrected and the  (Correction/Enhancement) mark appears on the upper left of
the image.
Important
Areas other than the eyes may be corrected depending on the image.
Note
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.Click Manual, then click Correct/Enhance.
4.Click Red-Eye Correction.
Move the cursor over the image. The shape of the cursor changes to  (Paintbrush).
5.Drag to select the red area you want to correct, then click OK that appears over the
image.
Red eye is corrected and the  (Correction/Enhancement) mark appears on the upper left of the
image.
Note
Click Undo to undo the preceding correction operation.
Effect levels can be changed using the slider below Red-Eye Correction.
Стр. 123 из 334 стр. Using the Red-Eye Correction Function
 
						

							6.Click Save Selected Image or Save All Corrected Images.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected images.
7.Click Exit.
Note
The corrections will be lost if you exit before saving corrected images.
Page top
Стр. 124 из 334 стр. Using the Red-Eye Correction Function
 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos
 > Using the Face Brightener Function
Using the Face Brightener Function
You can brighten dark faces caused by bright background.
1.Select photos in the Select Images screen, then click  (Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images window by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images Window for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list displayed in the lower part of the
Correct/Enhance Images window.
The image appears in Preview.
Note
If only one image is selected, the thumbnail does not appear below Preview.
3.Click Manual, then click Correct/Enhance.
4.Click Face Brightener.
Move the cursor over the image. The shape of the cursor changes to  (Cross).
Стр. 125 из 334 стр. Using the Face Brightener Function
 
						

							5.Drag to select the area you want to correct, then click OK that appears over the
image.
The entire image is corrected so that the selected area containing the face becomes brighter, and
the  (Correction/Enhancement) mark appears on the upper left of the image.
Note
You can also drag to rotate the rectangle.
Click Undo to undo the preceding correction operation.
Effect levels can be changed using the slider below Face Brightener.
6.Click Save Selected Image or Save All Corrected Images.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected images.
7.Click Exit.
Note
The corrections will be lost if you exit before saving corrected images.
Page top
Стр. 126 из 334 стр. Using the Face Brightener Function
 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos
 > Using the Face Sharpener Function
Using the Face Sharpener Function
You can sharpen out-of-focus faces in a photo.
You can perform the Face Sharpener function either automatically or manually.
1.Select photos in the Select Images screen, then click  (Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images window by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images Window for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list displayed in the lower part of the
Correct/Enhance Images window.
The image appears in Preview.
Note
If only one image is selected, the thumbnail does not appear below Preview.
Auto Correction
3.Make sure that Auto is selected.
4.Click Face Sharpener.
5.Click OK.
The face is sharpened and the  (Correction/Enhancement) mark appears on the upper left of the
image.
Стр. 127 из 334 стр. Using the Face Sharpener Function
 
						

							Note
Effect levels can be changed using the slider below Face Sharpener.
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.Click Manual, then click Correct/Enhance.
4.Click Face Sharpener.
Move the cursor over the image. The shape of the cursor changes to  (Cross).
5.Drag to select the area you want to correct, then click OK that appears over the
image.
The facial area in and around the selected area is sharpened and the  (Correction/
Enhancement) mark appears on the upper left of the image.
Note
You can also drag to rotate the rectangle.
Click Undo to undo the preceding correction operation.
Effect levels can be changed using the slider below Face Sharpener.
6.Click Save Selected Image or Save All Corrected Images.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Стр. 128 из 334 стр. Using the Face Sharpener Function
 
						

							Only JPEG/Exif file format is available for corrected images.
7.Click Exit.
Note
The corrections will be lost if you exit before saving corrected images.
Page top
Стр. 129 из 334 стр. Using the Face Sharpener Function
 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Digital Face Smoothing Function
Using the Digital Face Smoothing Function
You can enhance skin beautifully by removing blemishes and wrinkles.
You can perform the Digital Face Smoothing function either automatically or manually.
1.Select photos in the Select Images screen, then click  (Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images window by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images Window for details on the Correct/Enhance Images window.
2.Select the image you want to enhance from the list displayed in the lower part of the
Correct/Enhance Images window.
The image appears in Preview.
Note
If only one image is selected, the thumbnail does not appear below Preview.
Auto Enhancement
3.Make sure that Auto is selected.
4.Click Digital Face Smoothing.
5.Click OK.
Skin is enhanced beautifully and the  (Correction/Enhancement) mark appears on the upper left
of the image.
Стр. 130 из 334 стр. Using the Digital Face Smoothing Function