Canon network camera VBS805D User Manual

List of Log Messages
161
Appendix
6
„HTTP Server Messages
H143 User name specification error [notice] 
H144 Password specification error [notice] 
H201 Timeout disconnect [warning] 
„System Messages
S001 System started [info] 
S002 System settings changed [info] 
S010 Event service started [info] 
S011 Event service shut down [info] S012 External device service started [info] 
S013 External device service shut down [info] 
S014 Timer service started [info] 
S015 Timer service shut down [info] 
S070...

162
S307 Error on saving settings [err] 
S310 Working error in event service [err] 
S311 Working error in external input/output service 
[err] 
S312 Working error in timer service [err] 
S410 Event service initialization error [crit] S411 External input/output service initialization error 
[crit] 
S412 Timer service initialization error [crit] 
S413 Timer service runtime error [crit] 
„RTP-related Messages
R001 Startup of RTP distribution module [info]
R002 Stopping of RTP distribution module [info]...

List of Log Messages
163
Appendix
6
R003 RTSP PLAY request received [info]
R004 RTSP TEARDOWN request received [info]
R005 Starting multicast [info]R006 Stopping multicast [info]
R101 RTP session timeout [notice]
R102 Information acquisition failure (RTP payload 
size) [notice]
R102 Information acquisition failure (IP address) 
[notice]
R103 RTSP authentication failure [notice]
R107 RTSP authentication failure or missing 
authentication information [notice]
Description PLAY received: client_IP=%1,...

164
R107 Insufficient resources [notice]
R301 Distribution communication error [err]
R302 Parameter acquisition failure [err]
R303 Metadata distribution initialization failure [err]
R304 Abnormal termination of client [err]
R304 Client disconnected [err]R304 Client disconnected [err]
R305 RTSP processing error [err]
Description RTSP Error: error_code=503: Service 
Unavailable (R107)
Meaning Service unavailable due to insufficient 
resources.
For example, the max. number of RTP 
connections exceeded....

165
6
Appendix
Messages Displayed in the Information Field
Messages displayed in the information field of the viewer are classified into the following three types.
„Information Messages
„Warning Messages
List of Viewer Messages
IconCategoryExplanation
  Information Message Help messages on various buttons, pull-down lists, etc., as well as frame rate and other 
information from the camera are shown. 
  Warning Message A message will be displayed notifying the user when camera control privileges cannot...

166
Failed to get camera control privileges.  The request for camera control privileges was denied because the camera 
was being used by the Admin Viewer, etc. 
Failed to establish audio connection.  Connection for audio reception failed. 
You are not connected to the camera.  An attempt was made to operate the camera when the camera was not 
connected. 
Please get camera control privileges. 
An attempt was made to operate the camera without camera control privileges. 
Another user is already connected...

167
6
Appendix
If you have forgotten the settings and want to set the camera from the beginning, restore the factory default settings first.
It is recommended that you create a backup file using [Back Up Settings] in the Camera Management Tool before restoring 
the factory default settings.
Note
 For details on using Camera Management Tool, please refer to “Camera Management Tool User Manual”.
 For factory default settings, please refer to p. 169.
Restoring the Initial Setting from the 
Maintenance Page...

168
There is no on/off switch on the camera. Turn the 
camera on and off by plugging in or unplugging the 
LAN cable (PoE power supply).
The reset switch is located in a recessed area. Push 
the switch using the tip of a slender object such as a 
clip. 
All settings of the camera, except for the date and 
time, are restored to factory default settings. 
For top cover attachment, see the “Installation Guide” 
included with the camera.
2Turn off the camera. 
3Turn on the power while pushing the reset...

169
6
Appendix
List of Factory Default Settings
ItemSetting
  User Name (Administrator ID)  root
  Administrator password camera

LAN Interface Auto
Maximum Packet Size 1500

IPv4 Address Setting Method Manual
IPv4 Address   192.168.100.1
Subnet Mask 255.255.255.0
IPv4 Default Gateway Address
AutoIP Enable
IPv4 Address (AutoIP)

IPv6 Enable
Auto (RA) Enable
Auto (DHCPv6) Enable
IPv6 Address (Manual) 
Prefix Length 64
IPv6 Default Gateway Address
IPv6 Address (Auto) 
 DNS
Name Server Address 1
Name Server...

170
Color Saturation 4
Haze Compensation Disable
Haze Compensation Level 4
Day/Night Day Mode
 Camera Control
Digital Zoom 
 Disable
AGC Limit 5
Smart Shade Control Strength 
(Auto)Medium
Haze Compensation Strength 
(Auto)Medium
Pan/Tilt Speed Control 
 Control by zoom position
 Day/Night (when Auto is set)
Switching Brightness Standard
Response (sec.)  20
 Installation Conditions
LED Setting Turn On
Image Flip Disable
 Camera Position Control
Restricted to Presets 
 No Restriction
Camera Position...