Canon network camera VBS805D User Manual
Here you can view all the pages of manual Canon network camera VBS805D User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
141
Admin Viewer/VB Viewer
5
The operations and settings that can be performed only in the Admin Viewer are explained.
Using Control for Admin
When you have obtained control privileges, click the
[Control for Admin] button to display the Control for Admin
Panel and perform camera operation and video settings.
„Opening/Closing and Moving Control Items
Clicking the title of a control item will open or close it.
You can open the various control items even without
obtaining the camera control privileges,...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-140.png "Page 141
141
Admin Viewer/VB Viewer
5
The operations and settings that can be performed only in the Admin Viewer are explained.
Using Control for Admin
When you have obtained control privileges, click the
[Control for Admin] button to display the Control for Admin
Panel and perform camera operation and video settings.
„Opening/Closing and Moving Control Items
Clicking the title of a control item will open or close it.
You can open the various control items even without
obtaining the camera control privileges,...")
141 Admin Viewer/VB Viewer 5 The operations and settings that can be performed only in the Admin Viewer are explained. Using Control for Admin When you have obtained control privileges, click the [Control for Admin] button to display the Control for Admin Panel and perform camera operation and video settings. „Opening/Closing and Moving Control Items Clicking the title of a control item will open or close it. You can open the various control items even without obtaining the camera control privileges,...
Page 142
![Page 142
142
„Setting the Smart Shade Control
The smart shade control function differs from backlight
compensation in that only dark areas are brightened while
bright areas are kept intact.
(1) [Smart Shade Control]
Select [Auto], [Manual], or [Disable].
(2) Adjusting the Smart Shade Control
When smart shade control is [Manual], set one of the 7
levels from [1] (Mild) to [7] (Strong).
Example: If the background is bright and the subject
is hard to see, this function brightens dark areas to
make the subject...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-141.png "Page 142
142
„Setting the Smart Shade Control
The smart shade control function differs from backlight
compensation in that only dark areas are brightened while
bright areas are kept intact.
(1) [Smart Shade Control]
Select [Auto], [Manual], or [Disable].
(2) Adjusting the Smart Shade Control
When smart shade control is [Manual], set one of the 7
levels from [1] (Mild) to [7] (Strong).
Example: If the background is bright and the subject
is hard to see, this function brightens dark areas to
make the subject...")
142 „Setting the Smart Shade Control The smart shade control function differs from backlight compensation in that only dark areas are brightened while bright areas are kept intact. (1) [Smart Shade Control] Select [Auto], [Manual], or [Disable]. (2) Adjusting the Smart Shade Control When smart shade control is [Manual], set one of the 7 levels from [1] (Mild) to [7] (Strong). Example: If the background is bright and the subject is hard to see, this function brightens dark areas to make the subject...
Page 143
![Page 143
Performing Operations and Settings in the Admin Viewer
143
5
Admin Viewer/VB Viewer
„Setting the Exposure
(1) Exposure Mode
Select from [Auto], [Manual], [Auto (Flickerless)],
[Auto (Flickerless 2)] or [Auto (Shutter-priority AE)].
If [Auto] is selected for [Day/Night] under [Camera] in
the Setting page (p. 48), select [Auto ], [Auto
(Flickerless)], [Auto (Flickerless 2)] or [Auto (Shutter-
priority AE)].
[Auto]
The exposure is controlled automatically.
[Manual]
The exposure is set by adjusting the...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-142.png "Page 143
Performing Operations and Settings in the Admin Viewer
143
5
Admin Viewer/VB Viewer
„Setting the Exposure
(1) Exposure Mode
Select from [Auto], [Manual], [Auto (Flickerless)],
[Auto (Flickerless 2)] or [Auto (Shutter-priority AE)].
If [Auto] is selected for [Day/Night] under [Camera] in
the Setting page (p. 48), select [Auto ], [Auto
(Flickerless)], [Auto (Flickerless 2)] or [Auto (Shutter-
priority AE)].
[Auto]
The exposure is controlled automatically.
[Manual]
The exposure is set by adjusting the...")
Performing Operations and Settings in the Admin Viewer 143 5 Admin Viewer/VB Viewer „Setting the Exposure (1) Exposure Mode Select from [Auto], [Manual], [Auto (Flickerless)], [Auto (Flickerless 2)] or [Auto (Shutter-priority AE)]. If [Auto] is selected for [Day/Night] under [Camera] in the Setting page (p. 48), select [Auto ], [Auto (Flickerless)], [Auto (Flickerless 2)] or [Auto (Shutter- priority AE)]. [Auto] The exposure is controlled automatically. [Manual] The exposure is set by adjusting the...
Page 144
![Page 144
144
„Setting White Balance
(1) [Auto]
The white balance is adjusted automatically.
(2) [Light Source]
Select the light source from the pull-down menu below
according to the condition in which the camera is
used.
For an explanation on each item set in [Light Source],
see [White Balance] in the Setting page (p. 47).
(3) [Manual]
The white balance is adjusted manually.
[One-shot WB]
This is used for forcibly locking the white balance to
match the light source.
Example of setting method:
Illuminate...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-143.png "Page 144
144
„Setting White Balance
(1) [Auto]
The white balance is adjusted automatically.
(2) [Light Source]
Select the light source from the pull-down menu below
according to the condition in which the camera is
used.
For an explanation on each item set in [Light Source],
see [White Balance] in the Setting page (p. 47).
(3) [Manual]
The white balance is adjusted manually.
[One-shot WB]
This is used for forcibly locking the white balance to
match the light source.
Example of setting method:
Illuminate...")
144 „Setting White Balance (1) [Auto] The white balance is adjusted automatically. (2) [Light Source] Select the light source from the pull-down menu below according to the condition in which the camera is used. For an explanation on each item set in [Light Source], see [White Balance] in the Setting page (p. 47). (3) [Manual] The white balance is adjusted manually. [One-shot WB] This is used for forcibly locking the white balance to match the light source. Example of setting method: Illuminate...
Page 145
Performing Operations and Settings in the Admin Viewer 145 5 Admin Viewer/VB Viewer „Selecting the External Device Output You can control external device output and display the current output status using an icon. Output can be activated and deactivated by clicking this icon. „Registering Custom Settings By registering settings for camera position, exposure, white balance, etc. beforehand, you can load settings using manual or automatic control. In custom settings, the setting values for the...
Page 146
![Page 146
146
(4) [Register]
Register the auto control settings.
„Adjusting Image Quality
(1) [Noise Reduction]
Select [Mild], [Standard], or [Strong] for the noise
reduction setting.
Principally, this setting is more effective in low-light
conditions. When set to [Strong], the noise reduction
effect is increased, but the afterimage of moving
subjects becomes easier to see. When set to [Mild],
the noise reduction effect is decreased and resolution
is increased, but the video file size becomes larger.
(2)...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-145.png "Page 146
146
(4) [Register]
Register the auto control settings.
„Adjusting Image Quality
(1) [Noise Reduction]
Select [Mild], [Standard], or [Strong] for the noise
reduction setting.
Principally, this setting is more effective in low-light
conditions. When set to [Strong], the noise reduction
effect is increased, but the afterimage of moving
subjects becomes easier to see. When set to [Mild],
the noise reduction effect is decreased and resolution
is increased, but the video file size becomes larger.
(2)...")
146 (4) [Register] Register the auto control settings. „Adjusting Image Quality (1) [Noise Reduction] Select [Mild], [Standard], or [Strong] for the noise reduction setting. Principally, this setting is more effective in low-light conditions. When set to [Strong], the noise reduction effect is increased, but the afterimage of moving subjects becomes easier to see. When set to [Mild], the noise reduction effect is decreased and resolution is increased, but the video file size becomes larger. (2)...
Page 147
![Page 147
Performing Operations and Settings in the Admin Viewer
147
5
Admin Viewer/VB Viewer
Example:
Setting 1: Image Detection status ON
Other settings: Image Detection status OFF
Note
The icon signifying Detection mode will be displayed for a
maximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Volume detection)]
The volume detection status is displayed. When
sound that meets the criteria selected under [Event] >
[Volume Detection] in the Setting Page is detected,
the...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-146.png "Page 147
Performing Operations and Settings in the Admin Viewer
147
5
Admin Viewer/VB Viewer
Example:
Setting 1: Image Detection status ON
Other settings: Image Detection status OFF
Note
The icon signifying Detection mode will be displayed for a
maximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Volume detection)]
The volume detection status is displayed. When
sound that meets the criteria selected under [Event] >
[Volume Detection] in the Setting Page is detected,
the...")
Performing Operations and Settings in the Admin Viewer 147 5 Admin Viewer/VB Viewer Example: Setting 1: Image Detection status ON Other settings: Image Detection status OFF Note The icon signifying Detection mode will be displayed for a maximum of five minutes (except for Moving Object Detection). (3) [Intelligent Function (Volume detection)] The volume detection status is displayed. When sound that meets the criteria selected under [Event] > [Volume Detection] in the Setting Page is detected, the...
Page 148
148
Page 149
Chapter 6 Appendix ❏Memory Card Access ❏Modifiers ❏Troubleshooting ❏List of Log Messages ❏List of Viewer Messages ❏Restore Default Settings ❏List of Factory Default Settings ❏Specifications ❏Index
Page 150
![Page 150
150
You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 3 Setting
Page”, “[Memory Card] Memory Card Operations and Settings” (p. 73)).
When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot save
further video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility.
Video files when recording-mode stream transmission failed to be sent...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-149.png "Page 150
150
You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 3 Setting
Page”, “[Memory Card] Memory Card Operations and Settings” (p. 73)).
When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot save
further video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility.
Video files when recording-mode stream transmission failed to be sent...")
150 You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 3 Setting Page”, “[Memory Card] Memory Card Operations and Settings” (p. 73)). When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot save further video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility. Video files when recording-mode stream transmission failed to be sent...