Canon network camera VBS805D User Manual

Memory Card Access
151
Appendix
6
Note
 A folder is created once per hour.
 If the time difference is added to the starting and ending times, it will equal the local time.
„File Name Format for Data Downloaded with Recorded Video Utility
Example: Video, manually recorded on Sept. 10, 2015, starting from 16:06:19 (Camera Time Zone: GMT+09:00).
(1) Video recording date
(2) File creation time (UTC)
(3) Recording start time (UTC)
(4) Recording type
E: Event
M: Manual recording
R: Recording-mode stream
T:...

152
According to the setting item, you can specify parameters using modifier “% characters”.
Note
 A runtime error will occur if the specified name does not match. 
 If this modifier is not defined, “%” will be deleted. 
Modifiers
ModifiersMeaningDescription of character string entered
%n Reason for capture (number)  0 (test) | 1 (External device input) | 33 (Timer 1) | 34 (Timer 2) | 35 (Timer 3) | 36 (Timer 4) |
145 (Volume detection) | 161 (Intelligent Function Detection Setting 1) | 
162 (Intelligent...

Modifiers
153
Appendix
6
„Available Modifiers
The modifiers that can be used for each setting item are specified below. 
[HTTP Upload] (p. 56) 
[Parameter (query string)] 
All modifiers can be used. 
[FTP Upload] (p. 56) 
[Subdirectory Name to Create] 
Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used. 
[File Name to Create] 
Only the modifiers %y,%m,%d,%w,%H,%M,%S,%s,%n can be used. 
[E-mail Notification] (p. 57) 
[Message Body] 
All modifiers can be used.  

154
Before contacting the dealer where you purchased the product or Canons Customer Service Center, check the items 
specified as follows. If a log message is displayed, check the details of the message and corresponding countermeasure in 
the log message list. 
Note
For details on troubleshooting for Camera Management Tool, please refer to the Camera Management Tool User Manual.
Troubleshooting
ProblemCountermeasures
The camera does not start.  Check if the LAN cable is connected correctly.  
 Turn the...

Troubleshooting
155
Appendix
6
The camera cannot be controlled.   If you connect the Admin Viewer as an administrator, you will have exclusive 
possession of the camera control privileges. If you connect to the Admin Viewer as an 
Authorized User, you cannot control the camera unless the administrator releases 
camera control.  Consult the Administrator (p. 126). 
 The pan, tilt, focus and zoom may operate abnormally if the pan and 
tilt operational durability estimates are exceeded (p. 132).
The viewer...

156
Log Messages on the Camera
Log messages are classified into the following types.
Note
If no content is recorded in a log for approximately two hours, “-- 
MARK --” will be recorded in the message area.
„Application (Camera) Messages
W001 Starting and stopping of system [info] 
W030 Startup and shutdown of WebView Livescope 
Client [info] W031 Transmitted video data size [info] 
W040 Clearing to external memory [info] 
W101 Invalid user name [notice] 
W102 Invalid password [notice] 
W130 Buffer...

List of Log Messages
157
Appendix
6
„Application (Uploader) Messages
A004 Starting and stopping of uploader [info] 
A040 Number of uploads (MAIL) [notice] 
A041 Number of uploads (FTP) [notice] 
A042 Number of uploads (HTTP) [notice] 
A120 Resolution of upload destination name failed 
[notice] 
A121 Connection to upload destination failed [notice] 
A122 Connection to upload destination failed [notice] A134 Invalid upload setting (FTP/HTTP mode) [notice] 
A135 Invalid upload setting (FTP PORT/PASV mode)...

158
A470 Uploader initialization failed [crit] 
„Application (Audio Server) Messages
B001 Starting and shutdown of audio server [info] 
B011 Audio client connected [info] 
B012 Audio client closed [info] 
B102 Client connection denied [notice] B103 Client forcibly disconnected [notice] 
B402 Audio server initialization failed [err] 
B403 Settings change failed [err] 
„Application (Video-Related) Messages
V001 Starting and shutdown of video server [info] 
V020 Starting intelligent service [info] 
V021...

List of Log Messages
159
Appendix
6
V200 Video input warning [warning] 
V300 Video input error [err] 
V320 Internal error in intelligent service [err] 
V321 Pseudo mode setting error in intelligent service 
[err] V400 Video input initialization error [crit] 
V401 Video input command error [crit] 
V402 Video input frozen [crit] 
V403 Video input error [crit] 
Description video %1 warning - %2 (V200) 
%1 Video number
%2 Error number
Meaning An error that permits recovery of the video 
input system was...

160
V420 Could not start intelligent service [crit] 
V421 Intelligent service error [crit] 
„Application (Memory Card) Messages
M001 Starting and stopping of memory card control 
module [info] 
M203 Not enough space on memory card [warning]
M204 Invalid file removed [warning]
M207 Memory card removed before unmounting 
[warning]M208 Video file limit [warning]
M301 Memory card control module error [err]
„Application (Camera) Messages
C001 Starting and stopping of camera control module 
[info] 
C002 Camera...