Canon network camera VBR12VE User Manual

							Setting Page
5
131
By registering settings as presets, such as camera angles, camera settings (e.g. exposure) and Day/Night Mode switching, 
the presets can be easily called up  by Viewers to apply the settings.
Using Presets
In addition to immediate execution of registered camera  angles and the camera settings such as exposure when 
operating the viewer, you can use presets as follows.
 Execute the presets duri ng switches between Day Mode and Night Mode (P. 199).
 Automatically cycle through multiple presets at a set  time and in a predetermined sequence. (Preset Tour) (P. 134)
 When using the Intelligent Function,  lock the monitoring position at a preset camera angle (P. 175). 
Registering a Preset
The camera angle and camera settings can be registered as a preset.
The number of presets you can register are as follows.
 Maximum 257 presets (including the home position). 
 Maximum 65 presets (including the home position). 
 Maximum 21 presets (including the home position). 
[Camera] > [Preset]
Registering Presets
Important
 It is strongly recommended you register as presets,  the positions Intelligent Function will use for the camera.
 If you use a preset registered with the digital zoom, the camera position at registration may not be able to be reproduced wit h a high 
degree of accuracy. Therefore, it is recommended that you use a preset registered in the optical zoom area for the preset tour  and 
intelligent function. 
 Reconfigure the presets if you change the [Camera] > [Camera] >  [Installation Conditions] > [Image Flip] (P. 111) settings on the 
Setting Page.
 Reconfigure the presets if you change [Video]  > [All Videos] > [Video Size Set] (P. 104) settings in the Setting Page.
 If you change the settings in [Camera] > [Camera Control] > [Image  Stabilizer] in the Setting Page (P. 108), the angle of view when 
using the camera will not match the angle of view when you config ured presets. If you change [Image Stabilizer] settings, recheck the 
preset settings.
The following settings can be configured here.
 Camera Settings
 Preset Registration
R13R12M50
R13R12M50
R13R12M50
R13R12
M50
H652H651 
						

							132
The camera angle can also be operated from the following screens.
Panorama screen 
Digital PTZ panel 
Set the items to apply in the preset.  For a description of each item, please refer to “Camera Settings” (P. 113).
[Pan/Tilt/Zoom position] /[Digital PTZ Position]
Select [Register] to register the current camera angle as a preset.
Note
If you selected [Home] (home position) in  the preset list, [Pan/Tilt/Zoom position]/[Digital PTZ Position] is always registered.
[Camera Settings]
Select [Register] to register the current camera settings as a preset.
[Preset Name]
1Operate the panorama image to set the angl e you want to register as the preset.
2Click [Camera Settings] to set the items as necessary.
3Set the items of preset registration.
R13R12M50
H652H651
M50R12R13
Video Display Area Panorama Screen
Preview Frame
H651H652
Video Display Area Digital PTZ Panel
Preview Frame
R13R12M50H652H651 
						

							Setting Page
5
133
Enter a preset name. Be sure to enter a preset name in [Preset Name (alphanumeric characters)].
[Show in Viewers]
Select [Enable] to allow the Came ra Viewers to use the preset.
Note
If the preset position is outside the restrict view area,   (a warning icon) is displayed on the left.
The preset is saved in the camera.
Note
Click [Clear] to discard the settings and restore the settings sa ved in the camera. However, note that presets only registered to the 
preset list by clicking [R egister] are all discarded.
Deleting a Preset
Select the preset to delete in the pres et list, and click [Delete]. Click [Apply] to delete the preset from the camera. 
[Home] (home position) cannot be deleted.
 Previewing a Preset
Select a preset in the preset list, an d click [Preview]. The preset settings  are displayed in the video display area.
Checking Advanced Preset Information
Displays the information of the pr esets registered in the camera.
Select the preset to check the advan ced information from the preset list, and click [Show Detailed Information].
Check the detailed inform ation, and click [OK].
4Click [Register].
5To register multiple presets, repeat steps 1 – 4.
6Click [Apply]. 
						

							134
You can have the camera automatically tour multiple registered presets to allow monitoring.
Note
 Preset tour is not performed while the camera control privileges are obtained in the Camera Viewer or the video is displayed in the 
Setting Page.
 Preset tour is not performed when contro l privileges are obtained by RM-Lite.
Screen Composition
The screen composition differs according to the camera model,  because the number of tour routes that can be registered, 
number of presets that can be toured with  a single route, and tour conditions differ.
[Camera] > [Preset Tour]
Setting the Preset Tour Route
Important
 If you set frequent pan/tilt operations in a preset tour, the li fe expectancy of the pan/tilt drive part may become shorter. T he life 
expectancy may become even shorter in environments outside ordinary te mperatures (approx. 23°C (73°F) and approx. 60% 
humidity).
You can reduce the frequency of pan/tilt operations by setting a l onger stop time at each tour point, or by specifying an active time for 
the preset tour to reduce operation time.
 Intelligent Function cannot be us ed while using preset tour.
The following settings can be configured here.
 Route List
 Edit Tour Route
M50R12R13 
						

							Setting Page
5
135
(1) [Route List]The list of preset tour routes. Displa ys the tour conditions that are set. Up to five tour routes can be set.
(2) Tour Condition Settings Set the conditions for touring and the tour route name (P. 136).
(3) Preset Tour List Displays a list of the presets to tour. The pr esets are toured from the top of the list.
You can change the order of the pr esets and set the time to stop at the preset positions, etc.
(4) Video Display Area Displays the current camera video.
(5) Panorama Screen Displays the panorama images  registered in the camera.
M50R12R13
(1)
(2)
(4)
(5)
(3)
H651H652
(2)
(4)
(6)
(3)
R13R12M50
R13R12M50 
						

							136
(a) Pan/Tilt Preview Frame (Red Frame)Displays the vertical and horizontal  range the camera can move. Displayed when the restricted view is set 
(P. 127).
(b) Preview Frame (Blue Frame) Indicates the current trim posi tion in the video display area.
(c) Preset Preview Frame (White Frame) Indicates the preset/home position  that is currently selected.
(6) Digital PTZ Panel Displays the full video obtained by the  camera when starting [Preset Tour].
(b) Preview Frame (Blue Frame) Indicates the current camera angle in the video display area
(c) Preset Preview Frame (White Frame) Indicates the preset/home position  that is currently selected.
Tour Route Settings
The number of tour routes you can regist er and the number of presets that can be toured per route are as follows.
 Maximum 5 routes, maximu m 64 presets per route. 
 Maximum 1 route, maximu m 20 presets per route. 
Note
If the effective conditions or active times of the registered tour routes conflict, the routes listed higher in the [Route List ] take precedence.
[Effective Conditions]
Select the conditions to preform a preset tour.
[Not used]
Preset tour is not performed.
[Viewers Connected]
Preset tour is performed when a  Viewer is connected to the camera.
(a)
(b)
(c)
H652H651
(b)
(c)
R13R12M50
H652H651
M50R12R13
1Select the tour route to configure from [Route List]. 
2Specify Settings for Tour Route Names and Usage
R13R12M50 
						

							Setting Page
5
137
[Always]
Preset tour is always performed.
Note
When [Not used] is selected, the following preset tour route settings cannot be configured.
[Route Name (alphanumeric characters)]
Enter the tour route name.
[Specify Active Time]
Select [Specified] to configure a preset tour at a predetermined  time, and enter the start time and end time for the 
preset tour.
If [Viewers Connected] is set for [Effecti ve Conditions], the preset tour operates when the Viewer is connected to 
the camera at the tour start time. If [Always] is set fo r [Effective Conditions], the preset tour always operates.
[Reverse Route]
If you select [Enable], the preset tour order in [Edit Tour Route] will be reversed.
You can select multiple presets.
Note
If the position for the preset is outside the view restricti on range,   (warning icon) will be displayed on the left.
The preset is added to the [Edit Tour Route].
Select a preset in [Edit Tour Route] and click the [ ] or [ ] to change its position in the list.
If you select a preset in [Edit Tour Route] and  then click [Delete], the preset will be deleted.
Select a preview name in the [Preset List] or [Edit Tour Rout e] list, and click [Preview]. The preset settings can be 
checked in the video display area.
3Click [Add] in [Edit Tour Route].
4Select a preset to tour from the [Preset List].
R13R12M50
R13R12M50
5Click [Add].
M50R12R13 
						

							138
Note
If a preset has already been added to [Edit Tour Route] and is selected when another preset is added from the [Select Preset] list, 
the added preset will be displa yed below the selected preset.
Select the preset to configure in [Edi t Tour Route] and set the tour operation.
[Speed (PT)]
Select the camera pan/tilt speed  for moving to the next preset.
[Speed (Z)]
Select the camera zoom speed fo r moving to the next preset.
[Pause (sec)]
Enter the time the camera paus es at the preset position.
Note
If you want to view video during moves between presets, select a  slow speed. If you only want to switch quickly to view video at the 
preset positions, select a fast speed.
Click [Apply] after configuring the route. The setting will be saved to the camera.
Note
Click [Clear] to set the route again. The settings saved in the  camera are restored. However, note that presets only added to t he 
[Edit Tour Route] by clicki ng [Add] are all discarded.
6Configure the preset speed and pause duration.
7Click [Apply].
R13R12M50
R13R12M50
M50R12R13 
						

							Setting Page
5
139
Reduces the size of transmitted H.264 video by reducing the video quality of non-target areas, such as ceilings and the sky.
ADSR is an abbreviation for Area-specific Data Size Reduction.
Note
 The image quality of the specified area depends on the [Bit Rate Control] setting in [Video] > [H.264(1)] or [H.264(2)].– When [Use bit rate control] is set: The image quality is adjust ed according to the situation to match the target bit rate.
– When [Do not use bit rate control] is set: The setting  in [Video] > [H.264(1)] or [H.264(2)] is retained.
 The image quality for areas outside t he specified area will be reduced accor ding to [Data Size Reduction Level].
 Even if the camera pans, tilts, or zooms, the specified area follows the movement of the camera.
 Specified areas can only be config ured within view restrictions.
Specified Area
Specify the area where video quality is not to be lowered.
You can specify up to eight areas with different colored frames.
[Video and Audio] > [ADSR]
Reducing Data Size by Lowering Video Quality in Specific 
Areas
Important
Some image scenes and settings for selected  areas may not be able to reduce data size using ADSR. Please test the ADSR feature in the 
environment before use.
The following settings can be configured here.
 Specified Area

R13R12M50 
						

							140
If you select [Enable] for the area with the frame color you would like to use for the specified area, the frame will be 
displayed on the Viewer.
Set the specified area as follo ws within the display area.
 Drag out a frame and move it to the area you want to specify.
 Change the size of the frame by dragging any of the eight handles ( ■).
 If you want to change the camera angle, use the pan/tilt/zoom sliders.
Note
If you change the camera angle before operating the area frame,  the area frame may become hidden. To display the area frame aga in, 
either click the [Preview] button for the target specified area, or use the slider to move the camera angle to a position in which the entire 
area frame is displayed.
[Preview]
The camera will move to a specified area  if you click [Preview] for that area.
Note
You can use the Camera Viewer to check video with ADSR settings  applied. Video outside the specified area will deteriorate acco rding to 
the amount of applied data reduction.
ADSR
Set whether H.264(1) and H.264(2) will lower video q uality outside areas set with [Specified Area].
[Enable in H.264(1)]
Select [Enable] to lower video quality of outside  areas set with [Specified Area] in H.264(1) video.
[Enable in H.264(2)]
Select [Enable] to lower video quality of outside  areas set with [Specified Area] in H.264(2) video.
[Data Size Reduction Level]
Set the data size reduction level for the outside area of [Speci fied Area]. If you select [Low], the data size reduction effect is 
lower. If you select [High], the data  size reduction effect is higher.
Important
 If you change the [Image Flip] setting in [Camera] > [Insta llation Conditions], review the specified area settings.
 Reconfigure the specified area if you change the [V ideo] > [All Videos] > [Video Size Set] settings.
 Configure the specified area to a slightly larger size.
 Specified areas may deviate slig htly from the specified position depending on the zoom position.
 The selected area can only be set within the optical zoom ra nge, and cannot be set using the digital zoom range (P. 68).
R13R12M50
R13R12M50
M50R12R13
R13R12M50