Canon network camera VBR12VE User Manual

							Setting Page
5
91
(3) Zoom SliderZoom operations are the same as in the viewer (P. 68).
(4) Panorama Screen Displays the range of motion of the  camera on the panorama screen. If a panorama image is re gistered in the 
camera (P. 123), the panorama image is displayed. Yo u can set areas, etc. using mouse operations on the 
panorama screen for some Setting Pages.
(5) [Snapshot] Button Open the snapshot window and display a still image of the moment you clicked the button (P. 79).
(6) [Reconnect] Button Reconnects to the camera. You can use this when not connecting to the camera.
(7) [Screen Resize] Button The size of the video display area is sw itched each time this button is clicked.
(8) [Switch Mouse Operation] Button Click this button to perform camera pan/tilt operatio ns on the video display area using the mouse while the 
button is purple.
(9) [Obtain/Release Camera Control Privileges] Button Click this to obtain and release the camera control privileges (P. 67).
R13R12M50
R13R12M50 
						

							92
About Each Setting Page
This section will give an overview of each item in the Setting Menu and each submenu.
Each of the [Basic], [Video and Audio],  [Video], and [Video Record] menus has a [V ideo] submenu, but the functions are all 
common. The functions can be set in any of the menus and th e settings will be reflected in all of the [Video] submenus.
 Network (P. 96)
Network settings for connecting to the camera.
 User Management (P. 100)
Use this to change administra tor account information, add/
delete authorized users and  set privileges for users.
The settings of this item are t he same as those in [Security] 
> [User Management]. Settings configured on one page 
are also reflected on the other.
 Date and Time (P. 102)
Camera date and time settings.
 Video (P. 104) General video settings, such as the size and quality of 
video transmitted from the camera.
 Configure the startup, author ization, and view of the 
Viewer.Basic
Camera Camera (P. 108) Settings for the camera name and external input/output 
devices, and for use and installation of the camera.
 Camera Angle (P. 45) After installing the camera, set the camera angle, while 
checking the displayed video.
 Initial Setting (P. 112) Sets initial settings, such as  video quality compensation, at 
camera start up.
 Day/Night Mode Focus (P. 120) Set the focus positions for when Day/Night Mode are 
switched.
 Panorama (P. 123) Configure the creation and  management of panorama 
images.
 Restrict View (P. 127) Set the range that the camera can capture.
 Preset (P. 131) Register a series of  settings as a preset.
 Preset Tour (P. 134)
Configure the settings for automatically touring with 
multiple presets regi stered in advance.
H651
R13R12M50
R13R12M50 
						

							Setting Page
5
93
Video Record Video (P. 104)
 Upload (P. 156)Settings for uploading video via HTTP or FTP when an 
event is triggered.
 Memory Card (P. 215)
Perform memory card operat ions or configure settings.
The settings of this item are the same as those of the 
[Memory Card] menu. Settings configured on one page 
are also reflected on the other.
 E-mail Notification (P. 160) Settings for sending an e-mail notification to a specified 
recipient when an event is triggered.
Server  Server (P. 149)
Settings for HTTP server, SNMP server, FTP server usage 
or WS-Security time checks.
 Video Server (P. 152) Settings for clients that can be connected to a video 
server.
 Audio Server (P. 153) Settings for audio transmission  from the camera to the 
computer, and audio reception  from the computer to the 
camera.
 RTP Server (P. 154)
Settings for RTP streaming.
R13M50H652H651
Video and Audio Video (P. 104)
 ADSR (P. 139)ADSR is an abbreviation for Area-specific Data Size 
Reduction.
Reduces the data size of transmitted H.264 video by 
reducing the video qualit y of unspecified area.
 On-screen display (P. 141)
Displays the date and time, camera name and other text 
on the Viewer.
 Privacy Mask (P. 143)
Configure a mask for the areas of the camera video you 
want to mask.
 Audio (P. 147)
Settings for audio input from the microphone connected to 
the camera, audio output from the Viewer and playback of 
a sound clip.
R13M50H652H651
H651H652M50R13
R12
Video 
						

							94
Security
Memory Card (P. 215)
Maintenance User Management (P. 100)
The settings of this item are t he same as those of the [User 
Management] in [Basic] menu. Settings configured on one 
page are also reflected on the other.
 Host Restrictions (P. 204)
Separate access control from IPv4 and IPv6 addresses 
can be set.
 SSL/TLS (P. 206)
Certificate creation and management, and encrypted 
communication settings.
 802.1X (P. 209)
Settings for 802.1X authentication and authentication 
status display, and for ce rtificate administration.

Settings for using IPsec.
Settings for recording video to a memory card when an event 
is triggered.
The settings of this item are the same as those in [Video 
Record] > [Memory Card]. Settings configured on one page 
are also reflected on the other.
 General (P. 218) Check the device information/settings, and licenses, and 
reboot and initialize the device, etc.
 Backup / Restore (P. 220) Perform backup and restoration.
 Update Firmware (P. 221) Perform firmware updates.
 Log (P. 222)
Display logs and configure log notification.
User Page
Link to web page customized by the user.
For information on the User Page, contac t a Canon Customer Service Center.
Event
 External Device (P. 161)
Operation settings for external device output and for 
external device input triggered events.
 Audio Detection (P. 164) Detected changes in audio input from the microphone 
connected to the camera can trigger operations such as 
video recording or e-mail notification.
 The timer function can generate events that can trigger 
operations, such as video recording and e-mail 
notifications, at regular intervals.
 Intelligent Function (P. 169)
Configure the intelligent functions such as moving object 
detection, camera tamperin g detection, and intrusion 
detection.
 Switch Day/Night (P. 199) The camera angle can be moved to preset positions when 
Day Mode and Night Mode are switched.
 Linked Event (P. 200) By linking two types of events, a single event is triggered.R13M50H652H651
R13M50H652H651
R13M50H652H651 
						

							Setting Page
5
95
Video Output
When analog video output is enabled for the camera, a message is displayed in the following submenus of the Setting 
Page. – Video, Initial Setting, Day/Night Mode Focus, Preset, Pres et Tour, ADSR, Privacy Mask, RTP Server, Upload, Memory 
Card, Intelligent Function
Video output automatically reboots the  camera after 30 minutes have elapsed.
After rebooting, video output is disabl ed and the submenus can be configured.
[Reboot]
To change video settings, clic k [Exec] to reboot the camera.
Note
For details on analog video output, please  refer to the “Installation Guide”.
H652 
						

							96
Network settings for connecting to the camera.
LAN
Set the LAN communication method and size of video transmitted from the camera.
[LAN Interface]
Select the interface suited to the device for connecting to the camera. Generally use [Auto].
[Maximum Packet Size]
Enter the maximum packet size to be tran smitted by the camera. Normally there is no need to change the default setting of 
1500.
A setting of 1280 or greater is necessary when using IPv6.
When using ADSL, setting a slightly lower va lue may increase transmission efficiency.
IPv4
Settings for using IPv4 to connect to the camera. The IPv4 address can be a ssigned by the DHCP server automatically or 
set manually.
[Basic] > [Network]
Configuring Network Settings
Important
If any network settings are changed, the camera may become inaccessibl e from the active web browser. In this case, a confirmation 
dialog box will be displayed when you click [Apply] or [Apply and reboot]. Click [OK] to apply the new settings.
If you reboot the camera after changing settings and cannot connect  to the camera from the web browser, any available URI for 
connecting to the camera will be displayed in a message. If  you cannot connect to the camera through the displayed URI, contact  your 
system administrator.
The following settings can be configured here.



 DNS
 mDNS 
						

							Setting Page
5
97
[IPv4 Address Setting Method]
Select the method for setting the IPv4 address.
For [Manual], enter a fixed IPv4 address into [IPv4 Address].
For [Auto (DHCP)], the settings acquired from the DHCP server will be automatically entered in [IPv4 Address], [Subnet 
Mask] and [IPv4 Default Gateway Address].
[IPv4 Address]
When [IPv4 Address Setting Method] is set  to [Manual], enter a fixed IPv4 address.
The IP address cannot start wi th 127., such as 127.0.0.1.
[Subnet Mask]
When [IPv4 Address Setting Method] is set to [Manual], ent er the designated subnet mask values for each network.
[IPv4 Default Gateway Address]
When [IPv4 Address Setting Method] is set to [Manual], enter  a default gateway IP address. Be sure to set this when 
connecting the camera to a different  subnet from that of the Viewer.
[AutoIP]
Select this to enable or disable AutoIP.
[IPv4 Address (AutoIP)]
When [AutoIP] is set to [E nable], an automatically set IPv4 address is displayed.
IPv6
Settings for using IPv6 to connect to the camera. The IP v6 address can be assigned by the RA or DHCPv6 server 
automatically or set manually.
[IPv6]
Select this to enable or disable IPv6.
[Auto (RA)]
Select [Enable] to set an address autom atically using RA (Router Advertisement, network information automatically 
transmitted from a router).
[Auto (DHCPv6)]
Select [Enable] to use DHCPv6 to set an address automatically.
[IPv6 Address (Manual)]
Enter a fixed IPv6 address if  you set the address manually.
[Prefix Length]
Enter a prefix length if [Disable] is specified in [Auto (RA)].
Important
 Contact your System Administrator for the [IPv4 Address], [Subnet Mask] and [IPv4 Default Gateway Address] if you set the IPv4  
address manually.
 If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Defaul t Gateway Address] settings are wrong, the camera may become 
inaccessible via the network. If this  occurs, use the Camera Management Tool to reset the address (P. 40).
Important
If [Auto (DHCP)] is selected as the IPv4 a ddress setting method, the IPv4 address may  not be assigned correctly in certain environments, 
such as when a router is  present between the DHCP server and the camera. If  this occurs, select [Manual] and enter a fixed IPv4 
address.
Important
Contact your System Administrator for the [IPv6 Address], [Prefix Length] and [IPv6 Default Gateway Address] if you set the IPv 6 address 
manually. 
						

							98
[IPv6 Default Gateway Address]
Enter a default gateway address if [Disable] is specified in [Auto (RA)]. Be sure to set this when connecting the camera to a 
different subnet from that of the Viewer.
[IPv6 Address (Auto)]
If [Enable] is specified in [IPv6] and [Enable] is specified in [Auto (RA)] and  [Auto (DHCPv6)], then the automatically 
acquired address will be shown.
Note
In an environment where IPv6 cannot be used, and IPv6/Auto is se t to [Enable], then only the link-local address will be displayed in the 
[IPv6 Address (Auto)] field.
DNS
Set the DNS server address. The DNS server address can be  set manually or automatically assigned by a DHCP/DHCPv6 
server.
[Name Server Address 1], [Name Server Address 2]
Enter the name server address you want to register. To regist er only one address, keep the [Name Server Address 2] field 
blank.
Note
If [Name Server Address 1] is unavailable, [Name Server Address 2] will be accessed. However, [Name Server Address 2] must be s et in 
advance.
[Auto-Setting of Name Server Address]
Select the server to use for automatically setting the name server address.
To set [Use DHCP], select [Auto (DHCP)]  in [IPv4 Address Setting Method] (P. 97).
To set [Use DHCPv6], select [Enable] in [IPv6], then select [Enable] in [Auto (DHCPv6)] (P. 97).
[Name Server Address (DHCP)]
Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-Setting of  Name Server Address] to display the name server address 
acquired from the DHCP server.
[Name Server Address (DHCPv6)]
Select [Use DHCPv6] or [Use DHCP/DHCPv6 ] in [Auto-Setting of Name Server Address] to display the name server 
address acquired from the DHCPv6 server.
[Host Name]
You can register the camera host name in the name server us ing alphanumeric characters.
Do not use “_” (underscore) in the hos t name in Internet Explorer 9/10/11.
[Host Name Registration with DDNS]
When you enter a name into [Host Name] and select [Enable],  the host name will be registered in the name server.
Registering the host name to DDNS is useful when operating with [IPv4 Address Setting Method] set to [Auto (DHCP)] 
(P. 97). DNS server registration settings  must be set in advance. Contact your system admini strator for the DNS server 
settings.
[Search Domain]
Enter a domain name and click  [Add] to add the domain name to the Search Domain List.
Specify the host name without specifying a domain name for a serv er, such as the upload server, to search domains in the 
form “host name + domain name”, where the domain  names are specified in the Search Domain List.
Do not use “_” (underscore) in the domain name in Internet Explorer 9/10/11.
[Search Domain List]
A list of domain names added using [Search Domain].
The function queries the DNS server for each do main name starting from the top of the list.
Use the  ▲▼ buttons on the right to change the order of the domain names.
To delete a domain name, select one from the list and then click [Delete]. 
						

							Setting Page
5
99
mDNS
This will configure settings for using multicast DNS. If you use mDNS, the IP address and host name of the camera will be 
broadcast to other hosts on the network.
[Use mDNS]
Select this to enable or disable mDNS. 
						

							100
You can change the administrator account, add new authorized users, and set the privileges for authorized users and guest 
users.
For details on user privileges, please refer to “Camera Viewer Access Restrictions” (P. 55).
[User Management] is the same as [Sec urity] > [User Management]. Settings configured on one [User Management] page 
are also reflected on the other.
Administrator Account
Set this when changing the account  information for the administrator.
[Administrator Name]
Enter the administrator name using alphanumeric  characters, hyphens (-), and underscores (_).
[Password]
Enter the administrator password in alphanumeric characters.
If the Camera Viewer, etc., are connected, term inate the connection before changing the password.
[Confirm Password]
Enter the same password as above for confirmation.
Authorized User Account
Add authorized users.
[User Name], [Password]
To add the authorized user, enter the user name and password, then click [Add].
Enter the user name using alphanumeric cha racters, hyphens (-), and underscores (_).
Enter the password in alphanumeric characters.
Up to 50 authorized users can be added.
[User List]
Displays a list of added authorized users.
[Basic] > [User Management]
Configuring Accounts and Privileges
Important
 To ensure system security, change the administrator pass word periodically. Do not forget the new password.
 If you forget the administrator password, restore the factory de fault settings (P. 245). Note, however, that this will reset all camera 
settings to factory default settings including the administrator account, the network information, date and time.
The following settings can be configured here.
 Administrator Account
 Authorized User Account
 User Authority