Canon network camera VBC50iVBC50iR User Manual

4-21
VB Administration Tools
Preset Setting Tool
Setting Presets
You can set up Presets by either entering a value in the camera paramete\
rs or by using the
following 2 methods. Select the way which suits your environment or acco\
rding to your preference.
Changing Settings from the Preset Preview Frame
The Preset Preview frame on the panorama picture can be used to set pres\
ets.
○○ ○○○○To Make Settings...
1.From the Preset Selection box, select the
preset to be set and enter a name in “Preset
Name”....

4-22
Retrieving Values from the Camera Angle of the Admin Viewer and
Changing Settings
Start up Admin Viewer and set the camera angle as a preset.
○○○○○○To Make Settings...
1.From the Preset Selection box, select the
preset to be set, and enter the “Preset Name”.
Preset Setting Tool
2.Click the “Admin Viewer” button to start it up.
3. Click the “Start Control” button in the Admin
Viewer to obtain camera control rights for the
camera.
4. Move the camera angle to the position you want to set preset camera...

4-23
VB Administration Tools
Tip
● You can set a maximum of 20 presets.
● Changes in the preset settings are not reflected to the viewer while it \
is connected.
● If view restrictions are to be used, be sure that the Preset Preview Fra\
me (yellow)
does not protrude outside the View Restriction Frame (blue).
● The preview used in the Panorama Preview may be slightly different from \
the actual
picture. After the presets have been set, please check to be sure that t\
he presets
are correctly reflected...

4-24
Preset Tour
A Preset Tour can tour and monitor two or more specified Presets.
You can also set Preset Tour with “Presetting Best Shot” in Chapte\
r 3, “Basic Settings” (→ P.3-13).
Preset Tour Settings Area Display Screen
qwy
i
o! 0
q Tour Schedule list
Displays a list of the presets which have Preset Tour settings.
w “Add” button
Adds a preset to the Tour Schedule List.
e “Up” and “Down” button
Select a Preset from the list, and click the “Up” or “Down” \
button to change the order of the
Preset...

4-25
VB Administration Tools
o Speed (Z)
Sets the speed at which the camera moves when zooming, within a range of\
 1-8. By moving
the slide bar from left to right, the numeric value becomes larger and t\
he speed increases.
! 0Pause (sec)
Sets the time for which the camera pauses in the preset position, within\
 a range of 0-120
seconds in units of five seconds.
Tip
Preset Tour does not operate when the camera is being controlled with th\
e Viewer
for PC, or the Admin Viewer and so on.
Preset Setting...

4-26
2. Select the preset number you want to add tothe Tour Schedule from the Preset setting
area and click the “Add” button.
The preset is registered in the Tour Schedule list. You
can register a maximum of 20 presets.
Setting Preset Tour
○○ ○○○○To Make Settings...
1. Select an option from Auto Preset Tour.
Select either “For Viewers” or “Always”.
TipYou cannot add a home position to the Tour Schedule list.
Preset Setting Tool
3. Select a preset in the Tour Schedule list and
with the slide bars in...

4-27
VB Administration Tools
Schedule Setting Tool
With the Schedule Setting Tool, you can set up Timer, Motion Detection, \
Night Mode, External
Device Input and External Device Output services to perform automaticall\
y on a specified day of
the week or time of the day. You can set the start and end time and the \
content of the service on
the calendar in the Schedules Setting screen.
2. Enter settings for the Services ( → P.4-38).
● Timer:  Records pictures and audio* into the VB-C50i/VB-C50iR and...

4-28
Schedule Setting Tool Display Screen (Toolbar)
There are two kinds of Schedule settings, Normal Schedule and Special Sc\
hedule. The buttons in
the toolbar below can be used for both Normal and Special Schedules.
With these buttons, you can load and save setting information, stop comm\
unication, select Normal
schedule (→ P.4-29) and Special schedule ( → P.4-33) as well as open each service setting screen
( →  P.4-39, 4-42, 4-52, 4-54, 4-57).
q “Load Settings” button
Loads the schedule settings...

4-29
VB Administration Tools
Normal Schedule
With Normal Schedule, you can set up a schedule of one week from Sunday \
to Saturday. For
example, during the weekend when there is nobody in the office from 6:00\
pm on Friday to 9:00am
on Monday, the Motion Detection service will operate each week during th\
e period of time you
have specified and automatically monitor the office.
Normal Schedule Display Screen
qw
e
r
t
q Schedule selection checkbox
Check to select the number of the schedule you want to...

4-30
Setting Up a Normal Schedule
○○○○○○To Make Settings...
1. With the Normal Schedule displayed, select
an optional schedule number.
The schedule track for the number you have selected
is displayed in the weekly calendar. At this stage, the
correct start and end time and services are not set up
in the schedule track.
Schedule Setting Tool
2. Double-click the schedule track.
The Normal Schedule Settings dialog box appears.
Enter settings for the schedule.
3. Enter the name of the schedule.
You can...