Canon network camera VBC50iVBC50iR User Manual

3-11
Basic Settings
Setting Camera Control, Image Size and Quality (Camera and Video)
Tip
●Controllable range and shootable range are shown below.
0°
+
- +
-
Extent of pan control
Maximum horizontal extent of the video capture range
Extent of tilt control
Maximum vertical extent 
Maximum vertical extent of the video capture rangeof the video capture rangeMaximum vertical extent 
of the video capture range
Field of view at the Field of view at the maximum wide-angle settingmaximum wide-angle settingField...

3-12
Camera Names
1“Camera Name”
Used in the camera selection box on the viewers. This setting is require\
d. 1
Setting Camera Control, Image Size and Quality (Camera and Video)
 003-VBC50i-E-US
06.7.6, 11:34 AM
12
C
O
P
Y  

3-13
Basic Settings
Presetting Best Shot (Preset)
You can perform the following settings with Preset.
●Common Settings: For setting the tour schedule of present position.
● Preset 1-20: Register as many as 20 best shot angles as preset positions\
.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any changes, click the “Cance\
l” button.
Common Settings
1
2
NoteWhen you use Preset tour function, please refer to the note on page...

3-14
Presetting Best Shot (Preset)
1“Restrict Camera Control to Presets”
Camera control by using the Viewer for PC and the Viewer for Java can be\
 restricted to the
preset angles specified in Preset 1-20.
 “Auto Preset Tour”
Select a Preset Tour setting from the following options. “Not used”Preset Tour does not operate.
“For Viewers” Operates if any of the Viewer for Java, Viewer for PC or Admin Viewer is\
 connecting.
“Always” Preset Tour always operates.
“Tour Schedule”
Select the Preset number you...

3-15
Basic Settings
Preset 1-20
NoteChanges in the preset settings are not applied to the viewer while it is\
 connected.
Tip
You can make preset settings more easily with the VB Administration Tool\
s. Please
use the VB Administration Tools for the settings (→
 P.4-18).
Presetting Best Shot (Preset)
1
3 2
1 “Application”
Use these options to specify whether this preset can be used only for pi\
cture recording or is
also made available in the viewers. If it is also provided in the viewer\
s, always...

3-16
You can perform the following Settings with Server.
●Common Settings: For setting up the environment where users can connect \
to the
VB-C50i/VB-C50iR.
● HTTP Server: For setting web page distribution and managing the VB-C50i/
VB-C50iR.
● Camera Server: For setting up the viewing of video from the VB-C50i/VB-C\
50iR.
● Audio Server: For setting up audio-related items.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any...

3-17
Basic Settings
HTTP Server
1“HTTP Port”
Set the TCP port number for the HTTP. Enter a value between 1 and 65535.\
 The default
setting is 80.
2 “Global Address for Web Pages”
If a private address has been set in the VB-C50i/VB-C50iR and you want t\
o use the router’s
NAT functions to have a fixed global address for the VB-C50i/VB-C50iR (\
 → P.5-26), enter a
global address here, and this will let you view sample pages ( → P.5-6).
If “IP Address” is selected, enter the IP address specified in “\
IP...

3-18
Camera Server
1“Video Transmission Port”
Set the TCP port number for the video transmission protocol. Enter a val\
ue between 1 and
65535. The default setting is 65310. Normally, there is no need to chang\
e this setting.
2 “Camera Control Port”
Set the TCP port number for the camera control protocol. Enter a value b\
etween 1 and 65535.
The default setting is 65311. Normally, there is no need to change this \
setting.
3 “Maximum Frame Rate (fps)”
Set the maximum number of frames captured per...

3-19
Basic Settings
Audio Server  1-5 , 8  are only displayed with two particular models ( → P.iii).
1 “Audio Transmission”
Set “Audio Transmission” to “Used” to send audio to the View\
er for PC or Admin Viewer, that
is input into the microphone connected to the Multi-Terminal Module ( → P.1-12).
2 “Input Volume”
Set the volume of the input audio in a range from 1-100. The larger the \
numeric value, the
louder the audio will be.
3 “Voice Activity Detection”
Set “Voice Activity Detection” to “ON” to...

3-20
Audio Reception• Output Volume
• Echo Canceller
Setting Up the HTTP, Camera and Audio Servers (Server)
Note
●Use the Multi-Terminal Module ( → P.1-12) when connecting a microphone* or
speaker to the VB-C50i/VB-C50iR.
● Setting “Noise Canceller”, “Slope Filter”, and “Echo Canc\
eller” to “ON” may have
an effect on the audio volume and quality. Set “ON” or “OFF”\
 according to the
environment where you install and how you use the VB-C50i/VB-C50iR.*
● When sending or 
receiving audio*, please read...