Canon Maxify Mb5320 User Guide

The Machine Cannot Be Detected in the Wired LAN
Check1 Make sure that the machine is turned on.
Check2 Is Change LAN  in LAN settings  under Device settings  set to Disable LAN ?
LAN settings
Check3
 Make sure that the LAN cable is connected properly.
Make sure that the machine is connected to the router with the LAN cable. If the LAN cable is loose, connect the
cable properly.
If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router.
941
 

Other Problems with Network
Forgot an Access Point Name, SSID, or a Network Key
The Message Is Displayed on the Computer Screen During Setup
The Administrator Password Set to the Machine Was Forgotten
Checking Information about the Network
Packets Are Sent Steadily
How to Restore the Machine's Network Settings to Factory Default
942
 

Forgot an Access Point Name, SSID, or a Network Key
Cannot Connect with an Access Point to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP or
WPA/WPA2 Key)
How to Set an Encryption Key
Cannot Connect with an Access Point to Which a WEP or WPA/WPA2
Key Is Set (You Forgot the WEP or WPA/WPA2 Key)
For information on how to set up the access point, refer to the instruction manual provided with the access
point or contact its manufacturer. Make sure that the computer and the access point can...

Either TKIP (basic encryption) or AES (secure encryption) is selected automatically for the dynamic
encryption method.
For details, see 
Changing the WPA/WPA2 Detailed Settings .
Note
•
This machine supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2-
Personal).
944
 

The Message Is Displayed on the Computer Screen During Setup
The Enter Password Screen Is Displayed During Setup
The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Search Screen
"You are connecting the machine to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed During Setup
The following screen is displayed if an administrator password is set to the machine which has already
been set up to use via a network.
Enter the...

Security is not configured on the access point. The machine can still be used, so continue the setupprocedure to complete it.
Important
•
If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
946
 

The Administrator Password Set to the Machine Was Forgotten
Initialize the machine settings.
Select  Reset all , then the administrator password reverts to the default.
Reset setting
After initializing the machine settings, perform setup with the Setup CD-ROM or perform it according to the
instructions on our website.
947
 

Checking Information about the Network
Checking the IP Address or the MAC Address of the Machine
Checking the IP Address or the MAC Address of the Computer
Checking If the Computer and the Machine, or Computer and the Access Point Can Communicate
Checking the Network Setting Information
Checking the IP Address or the MAC Address of the Machine
To check the IP address or the MAC address of the machine, display the network setting information
using the operation panel of the machine or print out the...

To check that communication is available, perform the ping test.1.
Select Command Prompt  as shown below.
•
In Windows 8.1 or Windows 8, select  Command Prompt from the Start screen. If  Command
Prompt  is not displayed on the  Start screen, select the  Search charm, then search for
" Command Prompt ".
•
In Windows 7, Windows Vista, or Windows XP, click  Start > All Programs  > Accessories  >
Command Prompt .
2.
Type the ping command and the IP address of the target machine or the target access...

Packets Are Sent Steadily
While IJ Network Scanner Selector EX is enabled, it periodically transmits packets to check whether it can
communicate with the machine over the network. When using the computer in a network environment other
than the one used to set up the machine, disable IJ Network Scanner Selector EX.
To disable IJ Network Scanner Selector EX, right-click the 
 icon on the notification area on the
desktop, then select  Disable Canon IJ Network Scanner Selector EX .
950