Canon Lv-7265, Lv-7260, Lv-x7 Multimedia Projector Users Manual

42
5. Using On-Screen Menu
❸
 List of Menu Items
Image adjustment   Default  Item     
Image mode      1: Standard, 2: Presentation, 3: Cinema, 4: Video, 5: sRGB
 Detail settings General
      Reference    Standard, Presentation, Cinema, Video, sRGB
      Gamma    Dynamic, Natural, Black detail
      Color temperature    XLow, Low, Mid, High
   White balance
    
Brightness RGB, Contrast RGBBrightness
Contrast
Sharpness
Color level
Color balance
Reset
Display settings   Default Item    
Aspect    *...

43
5. Using On-Screen Menu
Information   Item
Usage time  Remaining lamp time
   Lamp counter 
   Filter counter   
Input signal  Source index
   Horizontal frequency   
   Vertical frequency   
    Input signal type  RGB, Component, HDTV, VIDEO, S-VIDEO, HDTV, Digital
    Video type  NTSC, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM,
    Sync type  Separate Sync, Composite Sync, Sync on Green, Sync on video
   Sync polarity
    Scan type  Interlace, Progressive
Version Model
   Serial number...

44
5. Using On-Screen Menu
❹
 Menu Descriptions & Functions [Image adjustment]
[Image mode]
    
When selecting user adjustable [Image mode], the submenu will be displayed.
You can customize each gamma or color. To do so, fi rst select [Image mode] and press the OK button, then pro-
ceed using the following steps.
[Detail settings]
   
Selecting Reference Setting [Reference]
This option allows you to adjust neutral tint for yellow, cyan or magenta. There are fi ve factory presets optimized 
for various...

45
5. Using On-Screen Menu
Normal
Standard
4:3 Aspect
When 16:9 is selected from 
the source (i.e. DVD player), 
the following selections will 
display:
Normal
16:9 image displayed 
in 4:3 modeWide zoom Cinema True size
Left and right 
stretchedLeft and right 
stretched
Wide zoom Cinema
Left and right 
stretchedLeft and right stretched to 
display the true aspect
When 4:3 is selected from 
the source (i.e. DVD play-
er), the following selections 
will display:
Adjusting White Balance [White balance]
This...

46
5. Using On-Screen Menu
NOTE: 
•  When you are displaying an RGB image with a higher resolution than the projectors native resolution, the image will be dis-
played in the projector’s native resolution. In this case [True size] is not available from the menu.
  Only when displaying an RGB image with a lower resolution than the projectors native resolution, will the image be able to be 
displayed in its true resolution [True size].
  When Computer 2 (Digital) is selected, some options of Aspect Ratio...

47
5. Using On-Screen Menu
❻
 Menu Descriptions & Functions [Setup]
[General]
   
Enabling Auto Keystone [Auto keystone] (LV-7265 only)
This feature allows the projector to detect its tilt and correct vertical distortion automatically.
To turn off the Auto Keystone feature, select [Off].
Correcting Vertical Keystone Distortion Manually [Keystone adjustment]
You can correct vertical distortion manually.
Saving Vertical Keystone Correction [Keystone save]
This option enables you to save your current...

48
LAMP
LAMP
5. Using On-Screen Menu
Selecting Lamp Mode [Lamp mode]
This feature enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life can 
be extended by using the Quiet mode.
Lamp Mode
Normal Mode
Quiet ModeDescription
This is the default set ting (10 0% 
Brightness).
Select this mode to increase the 
lamp life (approx. 80% Brightness).
Status of LAMP indicator
Off
Steady Green light
NOTE: 
•   The lamp life remaining and lamp hours used can be checked in [Usage...

49
5. Using On-Screen Menu
[Installation]
Selecting Projector Orientation [Image fl ip H/V]
This sets your image for your type of projection application. The options are:
front projection, rear projection, ceiling mounted projection and rear ceiling mounted projection.
Selecting Communication Speed [Communication speed]
This feature sets the baud rate of the SERVICE PORT (Mini DIN 8 Pin). It supports data rates from 4800 to 19200 
bps.
The default is 19200 bps.
Select the appropriate baud rate for your...

50
5. Using On-Screen Menu
Enabling Password [Password]
This feature turns on or off the Password function.
Unless the correct password is entered, the projector cannot project an image. (
→page 
36)
Selecting Menu Color [Menu color select]
You can choose between two color modes for menu color: color and monochrome.
Selecting Menu Display Time [Menu display time]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are...

51
5. Using On-Screen Menu
Enabling Fan Speed Mode [Fan mode]
This option allows you to select two modes for fan speed: Auto mode and High speed mode.
Auto ....................... The built-in fans automatically run at a variable speed according to the internal temperature.
High ....................... The built-in fans run at a  xed high speed.
When you wish to cool down the temperature inside the projector quickly, select [High].
NOTE: It is recommended that you select High speed mode if you continue...