Canon Lv-7265, Lv-7260, Lv-x7 Multimedia Projector Users Manual

							MULTIMEDIA PROJECTOR
LV-7265/LV-7260/LV-X7
User’s Manual
E
English 
						

							i
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your Canon LV-7265/LV-7260/LV-X7 projector and keep the manual 
handy for future reference. Your serial number is located on the bottom of your projector. Record it here:
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be eas-
ily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may be suffi cient to cause electrical 
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.
This symbol alerts the user that important information concerning the operation and maintenance of 
this unit has been provided.
The information should be read carefully to avoid problems.
WAR N I N G: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE 
PRONGS CAN BE FULLY INSERTED.
DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING 
MUST BE DONE BY QUALIFIED SERVICE PERSONNEL.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.
CAUTION
Avoid displaying stationary images for a prolonged period of time.
Doing so can result in these images being temporarily sustained on the surface of the LCD panel.
If this should happen, continue to use your projector. The static background from previous images will 
disappear.
CAUTION
Do not put the projector on its side when the lamp is turned on. 
Doing so may cause damage to the projector.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of Califor-
nia to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. 
						

							ii
Important Information
Federal Communication Commission Notice
Multimedia Projector, Model : LV-7265, LV-7260 and LV-X7
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the projector must be used with this equipment in order to comply 
with Class B limits in Subpart B of Part 15 of the FCC rules.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifi cations to the equipment unless otherwise specifi ed in the instructions. If 
such changes or modifi cations should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
Réglementation canadienne sur les intérferences radio
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Union (and EEA) only.
This symbol indicates that this product is not to be disposed of with your household waste, ac-
cording to the WEEE Directive (2002/96/EC) and your national law. This product should be 
handed over to a designated collection point, e.g., on an authorized one-for-one basis when you 
buy a new similar product or to an authorized collection site for recycling waste electrical and 
electronic equipment (EEE). Improper handling of this type of waste could have a possible nega-
tive impact on the environment and human health due to potentially hazardous substances that 
are generally associated with EEE. At the same time, your cooperation in the correct disposal 
of this product will contribute to the effective usage of natural resources. For more information 
about where you can drop off your waste equipment for recycling, please contact your local city 
offi ce, waste authority, approved WEEE scheme or your household waste disposal service.
Your cooperation in the correct disposal of this product will contribute to the effective usage of 
natural resources and will avoid incurring administrative sanctions according to art.
50 and following of Italian legislative decree 22/97.
For more information regarding return and recycling of WEEE products, please visit
www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein) 
						

							iii
Important Information
LAMP HANDLING
PRECAUTIONS
This projector uses a high-pressure mercury lamp which must be handled carefully and properly as mentioned below.
•  A lamp may explode with a loud sound or burn out due to a shock, scratch, or expiration of lifetime.
•  The lamp life may differ from lamp to lamp and according to the environment of use. There is not guarantee 
of the same lifetime for each lamp. Some lamps may fail or terminate their life in a shorter period of time than 
other similar lamps.
•  A lamp gradually becomes darker with time of use.
•  If the projector indicates that the lamp should be replaced (i.e., the LAMP indicator blinks red rapidly), chanc-
es of explosion become higher. Replace the lamp with a new one immediately.
•  Always keep your face away from the exhaust vent so that you do not suffer from the gas and broken shards 
of the lamp.
IF A LAMP EXPLODES
If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come 
out of the exhaust vent. The gas contains toxic mercury.
Open windows and doors for ventilation.
If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor 
immediately.
If a lamp explodes, its shards may scatter inside the projector. Ask the Canon service representa-
tive to clean and check the inside of the projector and replace the lamp.
DISPOSAL OF WASTE LAMP
Dispose of the mercury lamp of the projector according to the local regulation just like the fl uores-
cent lamp.
Lamp Replacement
•  To replace the lamp, follow all instructions provided on page 57.
•  Be sure to replace the lamp when the message [Replace with the new lamp.] appears. If you continue to use 
the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass 
may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.
  If this happens, contact your dealer for lamp replacement.
CAUTION
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the pro-
jector. Glass fragments could fall if the lamp has been burned out.
NOTE FOR CUSTOMERS IN THE US
 
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECY-
CLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. 
						

							iv
Important Information
10˚
For UK only: In UK, a BS approved power cord with moulded plug has a Black (fi ve Amps) fuse installed for use 
with this equipment. If a power cord is not supplied with this equipment please contact your supplier.
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent fi re and shock. Please read 
them carefully and heed all warnings.
Installation
•  Do not place the projector in the following conditions:
-  on an unstable cart, stand, or table.
-  near water, baths or damp rooms.
-  in direct sunlight, near heaters or heat radiating appliances.
-  in a dusty, smoky or steamy environment.
-  on a sheet of paper or cloth, rugs or carpets.
•  If you wish to have the projector installed on the ceiling:
-  Do not attempt to install the projector yourself.
-  The projector must be installed by qualifi ed technicians in order to ensure proper operation and reduce 
the risk of bodily injury.
-  In addition, the ceiling must be strong enough to support the projector and the installation must be in ac-
cordance with any local building codes.
-  Please consult your dealer for more information.
Do Not Use in the Following Environments
Do not install the projector in a humid or dusty place or a place where there is much oily
smoke or cigarette smoke. Optical parts such as a lens and mirror are stained, resulting in
poor picture.
Do not use the projector in a place where the temperature becomes very high or low.
Operating temperature: +5°C to +40°C Storage temperature: -10°C to +50°C
(Quiet mode selected automatically at 95°F to 104°F / 35°C to 40°C)
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other 
than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.
Fire and Shock Precautions
•  Ensure that there is suffi cient ventilation and that vents are unobstructed to prevent the build-up of heat in-
side projector. Allow at least 1 m (3.3') of space between your projector and a wall.
•  Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated 
the projector is turned on and immediately after the projector is turned off.
•  Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt 
retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or 
screwdriver into your projector. If something should fall into your projector, disconnect it immediately and 
have the object removed by a qualifi ed service personnel.
•  Do not place any objects on top of the projector.
•  Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fi re.
•  The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power 
fi ts this requirement before attempting to use your projector. 
						

							v
Important Information
•  Do not look into the lens while the projector is on. Serious damage to your eyes could result.
•  Keep any items such as magnifying glass out of the light path of the projector. The light being projected 
from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the 
lens, can cause unpredictable outcome such as fi re or injury to the eyes.
•  Do not cover the lens with the black lens cap or equivalent while the projector is on. Doing so can lead to 
melting the cap and possibly burning your hands due to the heat emitted from the light output.
•  Do not place any objects, which are easily affected by heat, in front of the projector lens or a projector exhaust
  Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from 
the output and exhaust.
•  Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fi re.
-  Do not use any power cords than the supplied one.
-  Do not bend or tug the power cord excessively.
-  Do not place the power cord under the projector, or any heavy object.
-  Do not cover the power cord with other soft materials such as rugs.
-  Do not heat the power cord
-  Do not handle the power plug with wet hands.
•  Turn off the projector, unplug the power cord and have the projector serviced by a qualifi ed service person-
nel under the following conditions:
-  When the power cord or plug is damaged or frayed.
-  If liquid has been spilled into the projector, or if it has been exposed to rain or water.
-  If the projector does not operate normally when you follow the instructions described in this user's manual.
-  If the projector has been dropped or the cabinet has been damaged.
-  If the projector exhibits a distinct change in performance, indicating a need for service.
•  Disconnect the power cord and any other cables before carrying the projector
•  Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.
•  Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of 
time.
CAUTION
•  Do not try to touch the ventilation outlet on the left side (when seen from the front) as it can become heated 
while the projector is turned on.
•  Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or 
hanging on the wall can cause damage to the projector.
•  Select [High] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select 
[Setup]→ [Options] → [Fan mode] → [High].) Fan noise increases noticeably in High mode.
•  Select [High] in Fan mode if you use the projector at a high altitude or under low atmospheric pressure.
•  Do not turn off the AC power by pressing the main power switch or by unplugging the power cord when the 
projector is powered on.
•  Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is 
blinking green. Doing so could cause premature lamp failure. 
						

							vi
Important Information
CARRYING/TRANSPORTING THE PROJECTOR
This projector is a precision machine. Do not give a strong shock to the projector or turn it down.
Thoroughly read "Use Caution When Carrying or Transporting the Projector" below and install the lens cap before car-
rying the projector. When transporting the projector by train or airplane, use a highly crashworthy transport case.
Use Caution When Carrying or Transporting the Projector
The carrying bag is intended for protection from dust and scratches on the surface of the cabinet, and it is not designed 
to protect the projector from external shocks. When carrying the projector with it put in the carrying bag, do not give a 
shock to it, drop it, or place anything on it.
Do not transport the projector through a courier or transport service with the carrying bag. The projector can damage.
Remote Control Precautions
•  Handle the remote control carefully.
•  If the remote control gets wet, wipe it dry immediately.
•  Avoid excessive heat and humidity.
•  Do not heat, take apart, or throw batteries into fi re.
•  If you will not be using the remote control for a long time, remove the batteries.
•  Ensure that you have the batteries' polarity (+/-) aligned correctly.
•  Do not use new and old batteries together, or use different types of batteries together.
•  Dispose of used batteries according to your local regulations. 
						

							vii
Table of Contents
Important Information  ......................................................................................... i
1. Introduction  ........................................................................................................ 1
❶ What's in the Box? ........................................................................................................ 1
❷ Introduction to the Projector .......................................................................................... 2
❸ Part Names of the Projector .......................................................................................... 4
Top Features ........................................................................................................... 6
Terminal Panel Features ......................................................................................... 7
❹ Part Names of the Remote Control ............................................................................... 8
Battery Installation ............................................................................................ 10
Remote Control Precautions ............................................................................ 10
Operating Range for Wireless Remote Control ................................................ 10
2. Installation and Connections  ................................................................. 11
❶ Setting Up the Screen and the Projector .................................................................... 12
Selecting a Location (LV-7265) ............................................................................. 12
Throw Distance and Screen Size ..................................................................... 12
Selecting a Location (LV-7260/LV-X7) .................................................................. 13
Throw Distance and Screen Size ..................................................................... 13
❷ Making Connections ................................................................................................... 15
Enabling the computer’s external display .............................................................. 15
Connecting Your PC or Macintosh Computer (LV-7265) ...................................... 15
Using Two Analog COMPUTER Inputs Simultaneously (LV-7265) ................. 16
When Viewing a DVI Digital Signal (LV-7265) ................................................. 17
Connecting Your PC or Macintosh Computer (LV-7260/LV-X7) ........................... 18
Connecting an External Monitor ............................................................................ 19
Connecting Your DVD Player with Component Output ......................................... 20
Connecting Your VCR or Laser Disc Player .......................................................... 21
Connecting the Supplied Power Cord ................................................................... 22
3. Projecting an Image (Basic Operation)  ............................................. 23
❶ Turning on the Projector ............................................................................................. 23
Note on Startup Screen (Menu Language Select screen) ..................................... 24
❷ Selecting a Source ...................................................................................................... 25
❸ Adjusting the Picture Size and Position ...................................................................... 26
❹ Correcting Keystone Distortion ................................................................................... 28
❺ Automatically Optimizing on RGB Image .................................................................... 30
❻ Turning Up or Down Volume ....................................................................................... 30
❼ Turning off the Projector ............................................................................................. 31
❽ After Use .....................................................................................................................32 
						

							viii
Table of Contents
4. Convenient Features  ................................................................................... 33
❶ Turning Off the Image and Sound ............................................................................... 33
❷ Freezing a Picture ....................................................................................................... 33
❸ Enlarging and Moving a Picture .................................................................................. 33
❹ Using the Remote Mouse Receiver (LV-7265/LV-7260) ............................................. 34
❺ Preventing the Unauthorized Use of the Projector ...................................................... 36
5. Using On-Screen Menu  .............................................................................. 39
❶ Using the Menus ......................................................................................................... 39
❷ Menu Elements ........................................................................................................... 41
❸ List of Menu Items ....................................................................................................... 42
❹ Menu Descriptions & Functions [Image adjustment] ................................................... 44
❺ Menu Descriptions & Functions [Display settings] ...................................................... 45
❻ Menu Descriptions & Functions [Setup] ...................................................................... 47
❼ Menu Descriptions & Functions [Information] ............................................................. 53
❽ Menu Descriptions & Functions [Reset] ...................................................................... 54
6. Maintenance  ..................................................................................................... 55
❶  Cleaning or Replacing the Filter ................................................................................. 55
❷  Cleaning the Cabinet and the Lens ............................................................................ 56
❸  Replacing the Lamp ................................................................................................... 57
7. Appendix  ............................................................................................................. 60
❶  Troubleshooting ......................................................................................................... 60
❷  Specifi cations ............................................................................................................. 63
❸  Cabinet Dimensions ................................................................................................... 65
❹  Pin Assignments of D-Sub ANALOG Input Connector .............................................. 66
❺  Compatible Input Signal List ...................................................................................... 67
❻  Relationship between Screen Size and Projection Distance ..................................... 68
❼  PC Control Codes and Cable Connection ................................................................. 70
❽  Troubleshooting Check List ....................................................................................... 71 
						

							1
❶
 Whats in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your projector.
ME
NU
BACKKE
YS
TON
E
W
A
RN
IN
G    POWER AUTO PCINPUTLAM
P
-+VOLVOL
Projector
Lens cap
AC power cord
(4.5 m / 14.8’)VGA cable
(1.8 m / 5.9’)
[7N520052]Soft case
Quick
Start
Guide
Important
Information
CD-ROM
User’s manual Quick Start Guide
Important Information
1.  I nt r o d uc t io n
For LV-7265 only 
POWERINPUT
IMAGEINFO.AUTO PC
BACKR-
CLICKL-
CLICK
FREEZE
RD-428E
ASPECT
MENUNO SHOWVOLD.ZOOMPAG
E
Remote control Batteries (AAA
2)
DVI to VGA adapter
Warranty
Remote mouse receiver
(10 cm / 0.3’)
For LV-7265/LV-7260 only